The only remaining consumer is new_inode, where it showed up in 2001 as
commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1]
with a changelog which does not mention it.

Since then the line got only touched up to keep compiling.

While it may have been of benefit back in the day, it is guaranteed to
at best not get in the way in the multicore setting -- as the code
performs *a lot* of work between the prefetch and actual lock acquire,
any contention means the cacheline is already invalid by the time the
routine calls spin_lock().  It adds spurious traffic, for short.

On top of it prefetch is notoriously tricky to use for single-threaded
purposes, making it questionable from the get go.

As such, remove it.

I admit upfront I did not see value in benchmarking this change, but I
can do it if that is deemed appropriate.

Removal from new_inode and of the entire thing are in the same patch as
requested by Linus, so whatever weird looks can be directed at that guy.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit a2225d931f75 ("autofs: remove left-over autofs4 stubs")
promised the removal of the fs/autofs/Kconfig fragment for AUTOFS4_FS
within a couple of releases, but five years later this still has not
happened yet, and AUTOFS4_FS is still enabled in 63 defconfigs.

Get rid of it mechanically:

   git grep -l CONFIG_AUTOFS4_FS -- '*defconfig' |
       xargs sed -i 's/AUTOFS4_FS/AUTOFS_FS/'

Also just remove the AUTOFS4_FS config option stub.  Anybody who hasn't
regenerated their config file in the last five years will need to just
get the new name right when they do.

Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull io_uring fixes from Jens Axboe:

 - Fix for io-wq not always honoring REQ_F_NOWAIT, if it was set and
   punted directly (eg via DRAIN) (me)

 - Capability check fix (Ondrej)

 - Regression fix for the mmap changes that went into 6.4, which
   apparently broke IA64 (Helge)

* tag 'io_uring-6.5-2023-07-21' of git://git.kernel.dk/linux:
  ia64: mmap: Consider pgoff when searching for free mapping
  io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area()
  io_uring: treat -EAGAIN for REQ_F_NOWAIT as final for io-wq
  io_uring: don't audit the capability check in io_uring_create()

IA64 is the only architecture which does not consider the pgoff value when
searching for a possible free memory region with vm_unmapped_area().
Adding this seems to have no negative side effect on IA64, so add it now
to make IA64 consistent with all other architectures.

Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-ia64@vger.kernel.org
Link: https://lore.kernel.org/r/20230721152432.196382-3-deller@gmx.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull Kbuild updates from Masahiro Yamada:

 - Remove the deprecated rule to build *.dtbo from *.dts

 - Refactor section mismatch detection in modpost

 - Fix bogus ARM section mismatch detections

 - Fix error of 'make gtags' with O= option

 - Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
   with the latest LLVM version

 - Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed

 - Ignore more compiler-generated symbols for kallsyms

 - Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles

 - Enable more kernel-doc warnings with W=2

 - Refactor <linux/export.h> by generating KSYMTAB data by modpost

 - Deprecate <asm/export.h> and <asm-generic/export.h>

 - Remove the EXPORT_DATA_SYMBOL macro

 - Move the check for static EXPORT_SYMBOL back to modpost, which makes
   the build faster

 - Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm

 - Warn missing MODULE_DESCRIPTION when building modules with W=1

 - Make 'make clean' robust against too long argument error

 - Exclude more objects from GCOV to fix CFI failures with GCOV

 - Allow 'make modules_install' to install modules.builtin and
   modules.builtin.modinfo even when CONFIG_MODULES is disabled

 - Include modules.builtin and modules.builtin.modinfo in the
   linux-image Debian package even when CONFIG_MODULES is disabled

 - Revive "Entering directory" logging for the latest Make version

* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
  modpost: define more R_ARM_* for old distributions
  kbuild: revive "Entering directory" for Make >= 4.4.1
  kbuild: set correct abs_srctree and abs_objtree for package builds
  scripts/mksysmap: Ignore prefixed KCFI symbols
  kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
  kbuild: builddeb: always make modules_install, to install modules.builtin*
  modpost: continue even with unknown relocation type
  modpost: factor out Elf_Sym pointer calculation to section_rel()
  modpost: factor out inst location calculation to section_rel()
  kbuild: Disable GCOV for *.mod.o
  kbuild: Fix CFI failures with GCOV
  kbuild: make clean rule robust against too long argument error
  script: modpost: emit a warning when the description is missing
  kbuild: make modules_install copy modules.builtin(.modinfo)
  linux/export.h: rename 'sec' argument to 'license'
  modpost: show offset from symbol for section mismatch warnings
  modpost: merge two similar section mismatch warnings
  kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
  modpost: use null string instead of NULL pointer for default namespace
  modpost: squash sym_update_namespace() into sym_add_exported()
  ...

Pull drm updates from Dave Airlie:
 "There is one set of patches to misc for a i915 gsc/mei proxy driver.

  Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
  of refactoring.

  core:
   - replace strlcpy with strscpy
   - EDID changes to support further conversion to struct drm_edid
   - Move i915 DSC parameter code to common DRM helpers
   - Add Colorspace functionality

  aperture:
   - ignore framebuffers with non-primary devices

  fbdev:
   - use fbdev i/o helpers
   - add Kconfig options for fb_ops helpers
   - use new fb io helpers directly in drivers

  sysfs:
   - export DRM connector ID

  scheduler:
   - Avoid an infinite loop

  ttm:
   - store function table in .rodata
   - Add query for TTM mem limit
   - Add NUMA awareness to pools
   - Export ttm_pool_fini()

  bridge:
   - fsl-ldb: support i.MX6SX
   - lt9211, lt9611: remove blanking packets
   - tc358768: implement input bus formats, devm cleanups
   - ti-snd65dsi86: implement wait_hpd_asserted
   - analogix: fix endless probe loop
   - samsung-dsim: support swapped clock, fix enabling, support var
     clock
   - display-connector: Add support for external power supply
   - imx: Fix module linking
   - tc358762: Support reset GPIO

  panel:
   - nt36523: Support Lenovo J606F
   - st7703: Support Anbernic RG353V-V2
   - InnoLux G070ACE-L01 support
   - boe-tv101wum-nl6: Improve initialization
   - sharp-ls043t1le001: Mode fixes
   - simple: BOE EV121WXM-N10-1850, S6D7AA0
   - Ampire AM-800480L1TMQW-T00H
   - Rocktech RK043FN48H
   - Starry himax83102-j02
   - Starry ili9882t

  amdgpu:
   - add new ctx query flag to handle reset better
   - add new query/set shadow buffer for rdna3
   - DCN 3.2/3.1.x/3.0.x updates
   - Enable DC_FP on loongarch
   - PCIe fix for RDNA2
   - improve DC FAMS/SubVP support for better power management
   - partition support for lots of engines
   - Take NUMA into account when allocating memory
   - Add new DRM_AMDGPU_WERROR config parameter to help with CI
   - Initial SMU13 overdrive support
   - Add support for new colorspace KMS API
   - W=1 fixes

  amdkfd:
   - Query TTM mem limit rather than hardcoding it
   - GC 9.4.3 partition support
   - Handle NUMA for partitions
   - Add debugger interface for enabling gdb
   - Add KFD event age tracking

  radeon:
   - Fix possible UAF

  i915:
   - new getparam for PXP support
   - GSC/MEI proxy driver
   - Meteorlake display enablement
   - avoid clearing preallocated framebuffers with TTM
   - implement framebuffer mmap support
   - Disable sampler indirect state in bindless heap
   - Enable fdinfo for GuC backends
   - GuC loading and firmware table handling fixes
   - Various refactors for multi-tile enablement
   - Define MOCS and PAT tables for MTL
   - GSC/MEI support for Meteorlake
   - PMU multi-tile support
   - Large driver kernel doc cleanup
   - Allow VRR toggling and arbitrary refresh rates
   - Support async flips on linear buffers on display ver 12+
   - Expose CRTC CTM property on ILK/SNB/VLV
   - New debugfs for display clock frequencies
   - Hotplug refactoring
   - Display refactoring
   - I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
   - Use large rings for compute contexts
   - HuC loading for MTL
   - Allow user to set cache at BO creation
   - MTL powermanagement enhancements
   - Switch to dedicated workqueues to stop using flush_scheduled_work()
   - Move display runtime init under display/
   - Remove 10bit gamma on desktop gen3 parts, they don't support it

  habanalabs:
   - uapi: return 0 for user queries if there was a h/w or f/w error
   - Add pci health check when we lose connection with the firmware.
     This can be used to distinguish between pci link down and firmware
     getting stuck.
   - Add more info to the error print when TPC interrupt occur.
   - Firmware fixes

  msm:
   - Adreno A660 bindings
   - SM8350 MDSS bindings fix
   - Added support for DPU on sm6350 and sm6375 platforms
   - Implemented tearcheck support to support vsync on SM150 and newer
     platforms
   - Enabled missing features (DSPP, DSC, split display) on sc8180x,
     sc8280xp, sm8450
   - Added support for DSI and 28nm DSI PHY on MSM8226 platform
   - Added support for DSI on sm6350 and sm6375 platforms
   - Added support for display controller on MSM8226 platform
   - A690 GPU support
   - Move cmdstream dumping out of fence signaling path
   - a610 support
   - Support for a6xx devices without GMU

  nouveau:
   - NULL ptr before deref fixes

  armada:
   - implement fbdev emulation as client

  sun4i:
   - fix mipi-dsi dotclock
   - release clocks

  vc4:
   - rgb range toggle property
   - BT601 / BT2020 HDMI support

  vkms:
   - convert to drmm helpers
   - add reflection and rotation support
   - fix rgb565 conversion

  gma500:
   - fix iomem access

  shmobile:
   - support renesas soc platform
   - enable fbdev

  mxsfb:
   - Add support for i.MX93 LCDIF

  stm:
   - dsi: Use devm_ helper
   - ltdc: Fix potential invalid pointer deref

  renesas:
   - Group drivers in renesas subdirectory to prepare for new platform
   - Drop deprecated R-Car H3 ES1.x support

  meson:
   - Add support for MIPI DSI displays

  virtio:
   - add sync object support

  mediatek:
   - Add display binding document for MT6795"

* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
  drm/i915: Fix a NULL vs IS_ERR() bug
  drm/i915: make i915_drm_client_fdinfo() reference conditional again
  drm/i915/huc: Fix missing error code in intel_huc_init()
  drm/i915/gsc: take a wakeref for the proxy-init-completion check
  drm/msm/a6xx: Add A610 speedbin support
  drm/msm/a6xx: Add A619_holi speedbin support
  drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
  drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
  drm/msm/a6xx: Fix some A619 tunables
  drm/msm/a6xx: Add A610 support
  drm/msm/a6xx: Add support for A619_holi
  drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
  drm/msm/a6xx: Introduce GMU wrapper support
  drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
  drm/msm/a6xx: Extend and explain UBWC config
  drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
  drm/msm/a6xx: Add a helper for software-resetting the GPU
  drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
  drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
  drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
  ...

This modifies our user mode stack expansion code to always take the
mmap_lock for writing before modifying the VM layout.

It's actually something we always technically should have done, but
because we didn't strictly need it, we were being lazy ("opportunistic"
sounds so much better, doesn't it?) about things, and had this hack in
place where we would extend the stack vma in-place without doing the
proper locking.

And it worked fine.  We just needed to change vm_start (or, in the case
of grow-up stacks, vm_end) and together with some special ad-hoc locking
using the anon_vma lock and the mm->page_table_lock, it all was fairly
straightforward.

That is, it was all fine until Ruihan Li pointed out that now that the
vma layout uses the maple tree code, we *really* don't just change
vm_start and vm_end any more, and the locking really is broken.  Oops.

It's not actually all _that_ horrible to fix this once and for all, and
do proper locking, but it's a bit painful.  We have basically three
different cases of stack expansion, and they all work just a bit
differently:

 - the common and obvious case is the page fault handling. It's actually
   fairly simple and straightforward, except for the fact that we have
   something like 24 different versions of it, and you end up in a maze
   of twisty little passages, all alike.

 - the simplest case is the execve() code that creates a new stack.
   There are no real locking concerns because it's all in a private new
   VM that hasn't been exposed to anybody, but lockdep still can end up
   unhappy if you get it wrong.

 - and finally, we have GUP and page pinning, which shouldn't really be
   expanding the stack in the first place, but in addition to execve()
   we also use it for ptrace(). And debuggers do want to possibly access
   memory under the stack pointer and thus need to be able to expand the
   stack as a special case.

None of these cases are exactly complicated, but the page fault case in
particular is just repeated slightly differently many many times.  And
ia64 in particular has a fairly complicated situation where you can have
both a regular grow-down stack _and_ a special grow-up stack for the
register backing store.

So to make this slightly more manageable, the bulk of this series is to
first create a helper function for the most common page fault case, and
convert all the straightforward architectures to it.

Thus the new 'lock_mm_and_find_vma()' helper function, which ends up
being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa.  So we not only convert more
than half the architectures, we now have more shared code and avoid some
of those twisty little passages.

And largely due to this common helper function, the full diffstat of
this series ends up deleting more lines than it adds.

That still leaves eight architectures (ia64, m68k, microblaze, openrisc,
parisc, s390, sparc64 and um) that end up doing 'expand_stack()'
manually because they are doing something slightly different from the
normal pattern.  Along with the couple of special cases in execve() and
GUP.

So there's a couple of patches that first create 'locked' helper
versions of the stack expansion functions, so that there's a obvious
path forward in the conversion.  The execve() case is then actually
pretty simple, and is a nice cleanup from our old "grow-up stackls are
special, because at execve time even they grow down".

The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because
it's just more straightforward to write out the stack expansion there
manually, instead od having get_user_pages_remote() do it for us in some
situations but not others and have to worry about locking rules for GUP.

And the final step is then to just convert the remaining odd cases to a
new world order where 'expand_stack()' is called with the mmap_lock held
for reading, but where it might drop it and upgrade it to a write, only
to return with it held for reading (in the success case) or with it
completely dropped (in the failure case).

In the process, we remove all the stack expansion from GUP (where
dropping the lock wouldn't be ok without special rules anyway), and add
it in manually to __access_remote_vm() for ptrace().

Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases.
Everything else here felt pretty straightforward, but the ia64 rules for
stack expansion are really quite odd and very different from everything
else.  Also thanks to Vegard Nossum who caught me getting one of those
odd conditions entirely the wrong way around.

Anyway, I think I want to actually move all the stack expansion code to
a whole new file of its own, rather than have it split up between
mm/mmap.c and mm/memory.c, but since this will have to be backported to
the initial maple tree vma introduction anyway, I tried to keep the
patches _fairly_ minimal.

Also, while I don't think it's valid to expand the stack from GUP, the
final patch in here is a "warn if some crazy GUP user wants to try to
expand the stack" patch.  That one will be reverted before the final
release, but it's left to catch any odd cases during the merge window
and release candidates.

Reported-by: Ruihan Li <lrh2000@pku.edu.cn>

* branch 'expand-stack':
  gup: add warning if some caller would seem to want stack expansion
  mm: always expand the stack with the mmap write lock held
  execve: expand new process stack manually ahead of time
  mm: make find_extend_vma() fail if write lock not held
  powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma()
  mm/fault: convert remaining simple cases to lock_mm_and_find_vma()
  arm/mm: Convert to using lock_mm_and_find_vma()
  riscv/mm: Convert to using lock_mm_and_find_vma()
  mips/mm: Convert to using lock_mm_and_find_vma()
  powerpc/mm: Convert to using lock_mm_and_find_vma()
  arm64/mm: Convert to using lock_mm_and_find_vma()
  mm: make the page fault mmap locking killable
  mm: introduce new 'lock_mm_and_find_vma()' page fault helper

Pull mm updates from Andrew Morton:

 - Yosry Ahmed brought back some cgroup v1 stats in OOM logs

 - Yosry has also eliminated cgroup's atomic rstat flushing

 - Nhat Pham adds the new cachestat() syscall. It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability

 - Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning

 - Lorenzo Stoakes has done some maintanance work on the
   get_user_pages() interface

 - Liam Howlett continues with cleanups and maintenance work to the
   maple tree code. Peng Zhang also does some work on maple tree

 - Johannes Weiner has done some cleanup work on the compaction code

 - David Hildenbrand has contributed additional selftests for
   get_user_pages()

 - Thomas Gleixner has contributed some maintenance and optimization
   work for the vmalloc code

 - Baolin Wang has provided some compaction cleanups,

 - SeongJae Park continues maintenance work on the DAMON code

 - Huang Ying has done some maintenance on the swap code's usage of
   device refcounting

 - Christoph Hellwig has some cleanups for the filemap/directio code

 - Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the
   provided APIs rather than open-coding accesses

 - Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings

 - John Hubbard has a series of fixes to the MM selftesting code

 - ZhangPeng continues the folio conversion campaign

 - Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock

 - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
   from 128 to 8

 - Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management

 - Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code

 - Vishal Moola also has done some folio conversion work

 - Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch

* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
  mm/hugetlb: remove hugetlb_set_page_subpool()
  mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
  hugetlb: revert use of page_cache_next_miss()
  Revert "page cache: fix page_cache_next/prev_miss off by one"
  mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
  mm: memcg: rename and document global_reclaim()
  mm: kill [add|del]_page_to_lru_list()
  mm: compaction: convert to use a folio in isolate_migratepages_block()
  mm: zswap: fix double invalidate with exclusive loads
  mm: remove unnecessary pagevec includes
  mm: remove references to pagevec
  mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
  mm: remove struct pagevec
  net: convert sunrpc from pagevec to folio_batch
  i915: convert i915_gpu_error to use a folio_batch
  pagevec: rename fbatch_count()
  mm: remove check_move_unevictable_pages()
  drm: convert drm_gem_put_pages() to use a folio_batch
  i915: convert shmem_sg_free_table() to use a folio_batch
  scatterlist: add sg_set_folio()
  ...

Pull locking updates from Ingo Molnar:

 - Introduce cmpxchg128() -- aka. the demise of cmpxchg_double()

   The cmpxchg128() family of functions is basically & functionally the
   same as cmpxchg_double(), but with a saner interface.

   Instead of a 6-parameter horror that forced u128 - u64/u64-halves
   layout details on the interface and exposed users to complexity,
   fragility & bugs, use a natural 3-parameter interface with u128
   types.

 - Restructure the generated atomic headers, and add kerneldoc comments
   for all of the generic atomic{,64,_long}_t operations.

   The generated definitions are much cleaner now, and come with
   documentation.

 - Implement lock_set_cmp_fn() on lockdep, for defining an ordering when
   taking multiple locks of the same type.

   This gets rid of one use of lockdep_set_novalidate_class() in the
   bcache code.

 - Fix raw_cpu_generic_try_cmpxchg() bug due to an unintended variable
   shadowing generating garbage code on Clang on certain ARM builds.

* tag 'locking-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
  locking/atomic: scripts: fix ${atomic}_dec_if_positive() kerneldoc
  percpu: Fix self-assignment of __old in raw_cpu_generic_try_cmpxchg()
  locking/atomic: treewide: delete arch_atomic_*() kerneldoc
  locking/atomic: docs: Add atomic operations to the driver basic API documentation
  locking/atomic: scripts: generate kerneldoc comments
  docs: scripts: kernel-doc: accept bitwise negation like ~@var
  locking/atomic: scripts: simplify raw_atomic*() definitions
  locking/atomic: scripts: simplify raw_atomic_long*() definitions
  locking/atomic: scripts: split pfx/name/sfx/order
  locking/atomic: scripts: restructure fallback ifdeffery
  locking/atomic: scripts: build raw_atomic_long*() directly
  locking/atomic: treewide: use raw_atomic*_<op>()
  locking/atomic: scripts: add trivial raw_atomic*_<op>()
  locking/atomic: scripts: factor out order template generation
  locking/atomic: scripts: remove leftover "${mult}"
  locking/atomic: scripts: remove bogus order parameter
  locking/atomic: xtensa: add preprocessor symbols
  locking/atomic: x86: add preprocessor symbols
  locking/atomic: sparc: add preprocessor symbols
  locking/atomic: sh: add preprocessor symbols
  ...

This finishes the job of always holding the mmap write lock when
extending the user stack vma, and removes the 'write_locked' argument
from the vm helper functions again.

For some cases, we just avoid expanding the stack at all: drivers and
page pinning really shouldn't be extending any stacks.  Let's see if any
strange users really wanted that.

It's worth noting that architectures that weren't converted to the new
lock_mm_and_find_vma() helper function are left using the legacy
"expand_stack()" function, but it has been changed to drop the mmap_lock
and take it for writing while expanding the vma.  This makes it fairly
straightforward to convert the remaining architectures.

As a result of dropping and re-taking the lock, the calling conventions
for this function have also changed, since the old vma may no longer be
valid.  So it will now return the new vma if successful, and NULL - and
the lock dropped - if the area could not be extended.

Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # ia64
Tested-by: Frank Scheiner <frank.scheiner@web.de> # ia64
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>