linux.git/arch/ia64/kernel/perfmon.c, branch master

ia64: Remove perfmon

2020-09-11T16:34:32+00:00

perfmon has been marked broken and thus been disabled for all builds
for more than two years.  Remove it entirely.

Cc: Anant Thazhemadam 
Signed-off-by: Christoph Hellwig 
Enthusiastically-ACKed-by: Al Viro 
Signed-off-by: Tony Luck 
Link: https://lore.kernel.org/r/20200911094920.1173631-1-hch@lst.de

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva

mmap locking API: use coccinelle to convert mmap_sem rwsem call sites

2020-06-09T16:39:14+00:00

This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.

The change is generated using coccinelle with the following rule:

// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .

@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)

Signed-off-by: Michel Lespinasse 
Signed-off-by: Andrew Morton 
Reviewed-by: Daniel Jordan 
Reviewed-by: Laurent Dufour 
Reviewed-by: Vlastimil Babka 
Cc: Davidlohr Bueso 
Cc: David Rientjes 
Cc: Hugh Dickins 
Cc: Jason Gunthorpe 
Cc: Jerome Glisse 
Cc: John Hubbard 
Cc: Liam Howlett 
Cc: Matthew Wilcox 
Cc: Peter Zijlstra 
Cc: Ying Han 
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com
Signed-off-by: Linus Torvalds

ia64: replace setup_irq() by request_irq()

2020-03-13T22:21:28+00:00

request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

Changing 'ia64_native_register_percpu_irq' decleration to include
'irq_handler_t' as an argument type in arch/ia64/include/asm/hw_irq.h
was causing build error - 'unknown type name 'irq_handler_t''

This was due to below header file sequence,
+ include/interrupt.h
 + include/hardirq.h
  + asm/hardirq.h
   + include/irq.h
    + asm/hw_irq.h
       [ 'ia64_native_register_percpu_irq' declared w/ 'irq_handler_t']
 [ 'irq_handler_t' typedef'ed here in 'include/interrupt.h']

'register_percpu_irq' defined to 'ia64_native_register_percpu_irq' is
the one invoked by the caller, not the latter directly. This was done
to support paravirtualization which was removed around 4 years back.
And 'register_percpu_irq' is invoked only inside 'arch/ia64/kernel'.

So 'register_percpu_irq' define to 'ia64_native_register_percpu_irq' is
removed, instead 'ia64_native_register_percpu_irq' is renamed to
'register_precpu_irq()' & it is directly invoked. Also,
'register_precpu_irq()' is declared in a new header file 'irq.h' inside
'arch/ia64/kernel/', this header file is included by C files invoking
'register_percpu_irq()'.

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed 
Signed-off-by: Tony Luck

Merge branch 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2019-07-19T17:42:02+00:00

Pull vfs mount updates from Al Viro:
 "The first part of mount updates.

  Convert filesystems to use the new mount API"

* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  mnt_init(): call shmem_init() unconditionally
  constify ksys_mount() string arguments
  don't bother with registering rootfs
  init_rootfs(): don't bother with init_ramfs_fs()
  vfs: Convert smackfs to use the new mount API
  vfs: Convert selinuxfs to use the new mount API
  vfs: Convert securityfs to use the new mount API
  vfs: Convert apparmorfs to use the new mount API
  vfs: Convert openpromfs to use the new mount API
  vfs: Convert xenfs to use the new mount API
  vfs: Convert gadgetfs to use the new mount API
  vfs: Convert oprofilefs to use the new mount API
  vfs: Convert ibmasmfs to use the new mount API
  vfs: Convert qib_fs/ipathfs to use the new mount API
  vfs: Convert efivarfs to use the new mount API
  vfs: Convert configfs to use the new mount API
  vfs: Convert binfmt_misc to use the new mount API
  convenience helper: get_tree_single()
  convenience helper get_tree_nodev()
  vfs: Kill sget_userns()
  ...

smp: Remove smp_call_function() and on_each_cpu() return values

2019-06-23T12:26:26+00:00

The return value is fixed. Remove it and amend the callers.

[ tglx: Fixup arm/bL_switcher and powerpc/rtas ]

Signed-off-by: Nadav Amit 
Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Dave Hansen 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: Andrew Morton 
Link: https://lkml.kernel.org/r/20190613064813.8102-2-namit@vmware.com

vfs: Convert ia64 perfmon to use the new mount API

2019-05-25T22:06:13+00:00

Convert the ia64 perfmon filesystem to the new internal mount API as the old
one will be obsoleted and removed.  This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.

See Documentation/filesystems/mount_api.txt for more information.

Signed-off-by: David Howells 
cc: Tony Luck 
cc: Fenghua Yu 
cc: linux-ia64@vger.kernel.org
Signed-off-by: Al Viro

mount_pseudo(): drop 'name' argument, switch to d_make_root()

2019-05-25T21:59:24+00:00

Once upon a time we used to set ->d_name of e.g. pipefs root
so that d_path() on pipes would work.  These days it's
completely pointless - dentries of pipes are not even connected
to pipefs root.  However, mount_pseudo() had set the root
dentry name (passed as the second argument) and callers
kept inventing names to pass to it.  Including those that
didn't *have* any non-root dentries to start with...

All of that had been pointless for about 8 years now; it's
time to get rid of that cargo-culting...

Signed-off-by: Al Viro

treewide: Add SPDX license identifier for missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

ia64: perfmon: don't mark buffer pages as PG_reserved

2019-03-06T05:07:19+00:00

In the old days, remap_pfn_range() required pages to be marked as
PG_reserved, so they would e.g.  never get swapped out.  This was
required for special mappings.  Nowadays, this is fully handled via the
VMA (VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP inside
remap_pfn_range() to be precise).  PG_reserved is no longer required but
only a relic from the past.

So only architecture specific MM handling might require it (e.g.  to
detect them as MMIO pages).  As there are no architecture specific
checks for PageReserved() apart from MCA handling in ia64code, this can
go.  Use simple vzalloc()/vfree() instead.

Note that before calling vzalloc(), size has already been aligned to
PAGE_SIZE, no need to align again.

Link: http://lkml.kernel.org/r/20190114125903.24845-9-david@redhat.com
Signed-off-by: David Hildenbrand 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: Oleg Nesterov 
Cc: David Hildenbrand 
Cc: David Howells 
Cc: Mike Rapoport 
Cc: Michal Hocko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds