linux.git/arch/ia64/kernel/mca_asm.S, branch master

arch: Remove Itanium (IA-64) architecture

2023-09-11T08:13:17+00:00

The Itanium architecture is obsolete, and an informal survey [0] reveals
that any residual use of Itanium hardware in production is mostly HP-UX
or OpenVMS based. The use of Linux on Itanium appears to be limited to
enthusiasts that occasionally boot a fresh Linux kernel to see whether
things are still working as intended, and perhaps to churn out some
distro packages that are rarely used in practice.

None of the original companies behind Itanium still produce or support
any hardware or software for the architecture, and it is listed as
'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers
that contributed on behalf of those companies (nor anyone else, for that
matter) have been willing to support or maintain the architecture
upstream or even be responsible for applying the odd fix. The Intel
firmware team removed all IA-64 support from the Tianocore/EDK2
reference implementation of EFI in 2018. (Itanium is the original
architecture for which EFI was developed, and the way Linux supports it
deviates significantly from other architectures.) Some distros, such as
Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have
dropped support years ago.

While the argument is being made [1] that there is a 'for the common
good' angle to being able to build and run existing projects such as the
Grid Community Toolkit [2] on Itanium for interoperability testing, the
fact remains that none of those projects are known to be deployed on
Linux/ia64, and very few people actually have access to such a system in
the first place. Even if there were ways imaginable in which Linux/ia64
could be put to good use today, what matters is whether anyone is
actually doing that, and this does not appear to be the case.

There are no emulators widely available, and so boot testing Itanium is
generally infeasible for ordinary contributors. GCC still supports IA-64
but its compile farm [3] no longer has any IA-64 machines. GLIBC would
like to get rid of IA-64 [4] too because it would permit some overdue
code cleanups. In summary, the benefits to the ecosystem of having IA-64
be part of it are mostly theoretical, whereas the maintenance overhead
of keeping it supported is real.

So let's rip off the band aid, and remove the IA-64 arch code entirely.
This follows the timeline proposed by the Debian/ia64 maintainer [5],
which removes support in a controlled manner, leaving IA-64 in a known
good state in the most recent LTS release. Other projects will follow
once the kernel support is removed.

[0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/
[1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/
[2] https://gridcf.org/gct-docs/latest/index.html
[3] https://cfarm.tetaneutral.net/machines/list/
[4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/
[5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/

Acked-by: Tony Luck 
Signed-off-by: Ard Biesheuvel

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13+00:00

The replacement of  with  made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s  " % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include " % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13+00:00

The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport 
Signed-off-by: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Brian Cain 
Cc: Catalin Marinas 
Cc: Chris Zankel 
Cc: "David S. Miller" 
Cc: Geert Uytterhoeven 
Cc: Greentime Hu 
Cc: Greg Ungerer 
Cc: Guan Xuetao 
Cc: Guo Ren 
Cc: Heiko Carstens 
Cc: Helge Deller 
Cc: Ingo Molnar 
Cc: Ley Foon Tan 
Cc: Mark Salter 
Cc: Matthew Wilcox 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Michael Ellerman 
Cc: Michal Simek 
Cc: Nick Hu 
Cc: Paul Walmsley 
Cc: Richard Weinberger 
Cc: Rich Felker 
Cc: Russell King 
Cc: Stafford Horne 
Cc: Thomas Bogendoerfer 
Cc: Thomas Gleixner 
Cc: Tony Luck 
Cc: Vincent Chen 
Cc: Vineet Gupta 
Cc: Will Deacon 
Cc: Yoshinori Sato 
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

percpu: make percpu symbols in ia64 unique

2009-10-29T13:34:14+00:00

This patch updates percpu related symbols in ia64 such that percpu
symbols are unique and don't clash with local symbols.  This serves
two purposes of decreasing the possibility of global percpu symbol
collision and allowing dropping per_cpu__ prefix from percpu symbols.

* arch/ia64/kernel/setup.c: s/cpu_info/ia64_cpu_info/

Partly based on Rusty Russell's "alloc_percpu: rename percpu vars
which cause name clashes" patch.

Signed-off-by: Tejun Heo 
Reviewed-by: Christoph Lameter 
Cc: Rusty Russell 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: linux-ia64@vger.kernel.org

[IA64] kexec: Make INIT safe while transition to

2009-09-14T23:18:02+00:00

kdump/kexec kernel

Summary:

  Asserting INIT on the beginning of kdump/kexec kernel will result
  in unexpected behavior because INIT handler for previous kernel is
  invoked on new kernel.

Description:

  In panic situation, we can receive INIT while kernel transition,
  i.e. from beginning of panic to bootstrap of kdump kernel.
  Since we initialize registers on leave from current kernel, no
  longer monarch/slave handlers of current kernel in virtual mode are
  called safely.  (In fact system goes hang as far as I confirmed)

How to Reproduce:

  Start kdump
    # echo c > /proc/sysrq-trigger
  Then assert INIT while kdump kernel is booting, before new INIT
  handler for kdump kernel is registered.

Expected(Desirable) result:

  kdump kernel boots without any problem, crashdump retrieved

Actual result:

  INIT handler for previous kernel is invoked on kdump kernel
  => panic, hang etc. (unexpected)

Proposed fix:

  We can unregister these init handlers from SAL before jumping into
  new kernel, however then the INIT will fallback to default behavior,
  result in warmboot by SAL (according to the SAL specification) and
  we cannot retrieve the crashdump.

  Therefore this patch introduces a NOP init handler and register it
  to SAL before leave from current kernel, to start kdump safely by
  preventing INITs from entering virtual mode and resulting in warmboot.

  On the other hand, in case of kexec that not for kdump, it also
  has same problem with INIT while kernel transition.
  This patch handles this case differently, because for kexec
  unregistering handlers will be preferred than registering NOP
  handler, since the situation "no handlers registered" is usual
  state for kernel's entry.

Signed-off-by: Hidetoshi Seto 
Cc: Vivek Goyal 
Cc: Haren Myneni 
Cc: kexec@lists.infradead.org
Acked-by: Fenghua Yu 
Signed-off-by: Tony Luck

[IA64] kdump: Mask MCA/INIT on frozen cpus

2009-09-14T23:17:05+00:00

Summary:

  INIT asserted on kdump kernel invokes INIT handler not only on a
  cpu that running on the kdump kernel, but also BSP of the panicked
  kernel, because the (badly) frozen BSP can be thawed by INIT.

Description:

  The kdump_cpu_freeze() is called on cpus except one that initiates
  panic and/or kdump, to stop/offline the cpu (on ia64, it means we
  pass control of cpus to SAL, or put them in spinloop).  Note that
  CPU0(BSP) always go to spinloop, so if panic was happened on an AP,
  there are at least 2cpus (= the AP and BSP) which not back to SAL.

  On the spinning cpus, interrupts are disabled (rsm psr.i), but INIT
  is still interruptible because psr.mc for mask them is not set unless
  kdump_cpu_freeze() is not called from MCA/INIT context.

  Therefore, assume that a panic was happened on an AP, kdump was
  invoked, new INIT handlers for kdump kernel was registered and then
  an INIT is asserted.  From the viewpoint of SAL, there are 2 online
  cpus, so INIT will be delivered to both of them.  It likely means
  that not only the AP (= a cpu executing kdump) enters INIT handler
  which is newly registered, but also BSP (= another cpu spinning in
  panicked kernel) enters the same INIT handler.  Of course setting of
  registers in BSP are still old (for panicked kernel), so what happen
  with running handler with wrong setting will be extremely unexpected.
  I believe this is not desirable behavior.

How to Reproduce:

  Start kdump on one of APs (e.g. cpu1)
    # taskset 0x2 echo c > /proc/sysrq-trigger
  Then assert INIT after kdump kernel is booted, after new INIT handler
  for kdump kernel is registered.

Expected results:

  An INIT handler is invoked only on the AP.

Actual results:

  An INIT handler is invoked on the AP and BSP.

Sample of results:

  I got following console log by asserting INIT after prompt "root:/>".
  It seems that two monarchs appeared by one INIT, and one panicked at
  last.  And it also seems that the panicked one supposed there were
  4 online cpus and no one did rendezvous:

    :
    [  0 %]dropping to initramfs shell
    exiting this shell will reboot your system
    root:/> Entered OS INIT handler. PSP=fff301a0 cpu=0 monarch=0
    ia64_init_handler: Promoting cpu 0 to monarch.
    Delaying for 5 seconds...
    All OS INIT slaves have reached rendezvous
    Processes interrupted by INIT - 0 (cpu 0 task 0xa000000100af0000)
    :
    <>
    :
    Entered OS INIT handler. PSP=fff301a0 cpu=0 monarch=1
    Delaying for 5 seconds...
    mlogbuf_finish: printing switched to urgent mode, MCA/INIT might be dodgy or fail.
    OS INIT slave did not rendezvous on cpu 1 2 3
    INIT swapper 0[0]: bugcheck! 0 [1]
    :
    <>
    :
    Kernel panic - not syncing: Attempted to kill the idle task!

Proposed fix:

  To avoid this problem, this patch inserts ia64_set_psr_mc() to mask
  INIT on cpus going to be frozen.  This masking have no effect if the
  kdump_cpu_freeze() is called from INIT handler when kdump_on_init == 1,
  because psr.mc is already turned on to 1 before entering OS_INIT.
  I confirmed that weird log like above are disappeared after applying
  this patch.

Signed-off-by: Hidetoshi Seto 
Cc: Vivek Goyal 
Cc: Haren Myneni 
Cc: kexec@lists.infradead.org
Acked-by: Fenghua Yu 
Signed-off-by: Tony Luck

[IA64] Add API for allocating Dynamic TR resource.

2008-04-03T18:02:58+00:00

Dynamic TR resource should be managed in the uniform way.
Add two interfaces for kernel:
ia64_itr_entry: Allocate a (pair of) TR for caller.
ia64_ptr_entry: Purge a (pair of ) TR by caller.

Signed-off-by: Xiantao Zhang 
Signed-off-by: Anthony Xu 
Signed-off-by: Tony Luck

[IA64] mca style cleanup

2008-02-04T23:42:06+00:00

Unified changelog, 80 columns rule, and address form fix.

Signed-off-by: Hidetoshi Seto 
Signed-off-by: Tony Luck

[IA64] Support multiple CPUs going through OS_MCA

2007-07-11T18:50:11+00:00

Linux does not gracefully deal with multiple processors going
through OS_MCA aa part of the same MCA event.  The first cpu
into OS_MCA grabs the ia64_mca_serialize lock.  Subsequent
cpus wait for that lock, preventing them from reporting in as
rendezvoused.  The first cpu waits 5 seconds then complains
that all the cpus have not rendezvoused.  The first cpu then
handles its MCA and frees up all the rendezvoused cpus and
releases the ia64_mca_serialize lock.  One of the subsequent
cpus going thought OS_MCA then gets the ia64_mca_serialize
lock, waits another 5 seconds and then complains that none of
the other cpus have rendezvoused.

This patch allows multiple CPUs to gracefully go through OS_MCA.

The first CPU into ia64_mca_handler() grabs a mca_count lock.
Subsequent CPUs into ia64_mca_handler() are added to a list of cpus
that need to go through OS_MCA (a bit set in mca_cpu), and report
in as rendezvoused, and but spin waiting their turn.

The first CPU sees everyone rendezvous, handles his MCA, wakes up
one of the other CPUs waiting to process their MCA (by clearing
one mca_cpu bit), and then waits for the other cpus to complete
their MCA handling.  The next CPU handles his MCA and the process
repeats until all the CPUs have handled their MCA.  When the last
CPU has handled it's MCA, it sets monarch_cpu to -1, releasing all
the CPUs.

In testing this works more reliably and faster.

Thanks to Keith Owens for suggesting numerous improvements
to this code.

Signed-off-by: Russ Anderson 
Signed-off-by: Tony Luck