linux.git/arch/ia64/kernel/Makefile, branch v2.6.26

Generic semaphore implementation

2008-04-17T14:42:34+00:00

Semaphores are no longer performance-critical, so a generic C
implementation is better for maintainability, debuggability and
extensibility.  Thanks to Peter Zijlstra for fixing the lockdep
warning.  Thanks to Harvey Harrison for pointing out that the
unlikely() was unnecessary.

Signed-off-by: Matthew Wilcox 
Acked-by: Ingo Molnar

[IA64] Itanium MC Error Injection Tool: Makefile changes

2007-01-29T23:27:07+00:00

This patch has Makefile changes.

Signed-off-by: Fenghua Yu 
Signed-off-by: Tony Luck

[IA64] CONFIG_KEXEC/CONFIG_CRASH_DUMP permutations

2006-12-12T18:11:00+00:00

Actually, on reflection I think that there is a good case for
keeping the options separate. I am thinking particularly of people
who want a very small crashdump kernel and thus don't want to compile
in kexec.

The patch below should fix things up so that all valid combinations of
KEXEC, CRASH_DUMP and VMCORE compile cleanly - VMCORE depends on
CRASH_DUMP which is why I said valid combinations. In a nutshell
it just untangles unrelated code and switches around a few defines.

Please note that it creats a new file, arch/ia64/kernel/crash_dump.c
This is in keeping with the i386 implementation.

Signed-off-by: Simon Horman 
Signed-off-by: Tony Luck

[IA64] IA64 Kexec/kdump

2006-12-07T17:51:35+00:00

Changes and updates.

1. Remove fake rendz path and related code according to discuss with Khalid Aziz.
2. fc.i offset fix in relocate_kernel.S.
3. iospic shutdown code eoi and mask race fix from Fujitsu.
4. Warm boot hook in machine_kexec to SN SAL code from Jack Steiner.
5. Send slave to SAL slave loop patch from Jay Lan.
6. Kdump on non-recoverable MCA event patch from Jay Lan
7. Use CTL_UNNUMBERED in kdump_on_init sysctl.

Signed-off-by: Zou Nan hai 
Signed-off-by: Tony Luck

[PATCH] msi: move the ia64 code into arch/ia64

2006-10-04T14:55:29+00:00

This is just a few makefile tweaks and some file renames.

Signed-off-by: Eric W. Biederman 
Cc: Ingo Molnar 
Cc: Tony Luck 
Cc: Andi Kleen 
Cc: Thomas Gleixner 
Cc: Greg KH 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Pull esi-support into release branch

2006-09-26T16:47:30+00:00

[PATCH] vDSO hash-style fix

2006-07-31T20:28:43+00:00

The latest toolchains can produce a new ELF section in DSOs and
dynamically-linked executables.  The new section ".gnu.hash" replaces
".hash", and allows for more efficient runtime symbol lookups by the
dynamic linker.  The new ld option --hash-style={sysv|gnu|both} controls
whether to produce the old ".hash", the new ".gnu.hash", or both.  In some
new systems such as Fedora Core 6, gcc by default passes --hash-style=gnu
to the linker, so that a standard invocation of "gcc -shared" results in
producing a DSO with only ".gnu.hash".  The new ".gnu.hash" sections need
to be dealt with the same way as ".hash" sections in all respects; only the
dynamic linker cares about their contents.  To work with older dynamic
linkers (i.e.  preexisting releases of glibc), a binary must have the old
".hash" section.  The --hash-style=both option produces binaries that a new
dynamic linker can use more efficiently, but an old dynamic linker can
still handle.

The new section runs afoul of the custom linker scripts used to build vDSO
images for the kernel.  On ia64, the failure mode for this is a boot-time
panic because the vDSO's PT_IA_64_UNWIND segment winds up ill-formed.

This patch addresses the problem in two ways.

First, it mentions ".gnu.hash" in all the linker scripts alongside ".hash".
 This produces correct vDSO images with --hash-style=sysv (or old tools),
with --hash-style=gnu, or with --hash-style=both.

Second, it passes the --hash-style=sysv option when building the vDSO
images, so that ".gnu.hash" is not actually produced.  This is the most
conservative choice for compatibility with any old userland.  There is some
concern that some ancient glibc builds (though not any known old production
system) might choke on --hash-style=both binaries.  The optimizations
provided by the new style of hash section do not really matter for a DSO
with a tiny number of symbols, as the vDSO has.  If someone wants to use
=gnu or =both for their vDSO builds and worry less about that
compatibility, just change the option and the linker script changes will
make any choice work fine.

Signed-off-by: Roland McGrath 
Cc: "Luck, Tony" 
Cc: Kyle McMartin 
Cc: Paul Mackerras 
Cc: Benjamin Herrenschmidt 
Cc: Jeff Dike 
Cc: Andi Kleen 
Cc: Sam Ravnborg 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] audit syscall classes

2006-07-01T11:44:10+00:00

Allow to tie upper bits of syscall bitmap in audit rules to kernel-defined
sets of syscalls.  Infrastructure, a couple of classes (with 32bit counterparts
for biarch targets) and actual tie-in on i386, amd64 and ia64.

Signed-off-by: Al Viro

[IA64] esi-support

2006-06-21T18:19:22+00:00

Add support for making ESI calls [1].  ESI stands for "Extensible SAL
specification" and is basically a way for invoking firmware
subroutines which are identified by a GUID.  I don't know whether ESI
is used by vendors other than HP (if you do, please let me know) but
as firmware "backdoors" go, this seems one of the cleaner methods, so
it seems reasonable to support it, even though I'm not aware of any
publicly documented ESI calls.  I'd have liked to make the ESI module
completely stand-alone, but unfortunately that is not easily (or not
at all) possible because in order to make ESI calls in physical mode,
a small stub similar to the EFI stub is needed in the kernel proper.
I did try to create a stub that would work in user-level, but it
quickly got ugly beyond recognition (e.g., the stub had to make
assumptions about how the module-loader generated call-stubs work) and
I didn't even get it to work (that's probably fixable, but I didn't
bother because I concluded it was too ugly anyhow).  While it's not
terribly elegant to have kernel code which isn't actively used in the
kernel proper, I think it might be worth making an exception here for
two reasons: the code is trivially small (all that's really needed is
esi_stub.S) and by including it in the normal kernel distro, it might
encourage other OEMs to also use ESI, which I think would be far
better than each inventing their own firmware "backdoor".

The code was originally written by Alex.  I just massaged and packaged
it a bit (and perhaps messed up some things along the way...).

Changes since first version of patch that was posted to mailing list:
* Export ia64_esi_call and ia64_esi_call_phys() as GPL symbols.
* Disallow building esi.c as a module for now.  Building as a module
  would currently lead to an unresolved reference to "sal_lock" on SMP kernels
  because that symbol doesn't get exported.
* Export esi_call_phys() only if ESI is enabled.
* Remove internal stuff from esi.h and add a "proc_type" argument to
  ia64_esi_call() such that serialization-requirements can be expressed (ESI
  follows SAL here, where procedure calls may have to be serialized, are
  MP-safe, or MP-safe andr reentrant).

[1] h21007.www2.hp.com/dspp/tech/tech_TechDocumentDetailPage_IDX/1,1701,919,00.html

Signed-off-by: David Mosberger 
Signed-off-by: Alex Williamson 
Signed-off-by: Tony Luck

[PATCH] DMI: move dmi_scan.c from arch/i386 to drivers/firmware/

2006-04-14T18:41:25+00:00

dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64.
Currently all three arches compile it from arch/i386, which means that ia64
and x86_64 depend on things in arch/i386 that they wouldn't otherwise care
about.

This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing
trailing whitespace) and the associated Makefile changes.  All three
architectures already set CONFIG_DMI in their top-level Kconfig files.

Signed-off-by: Bjorn Helgaas 
Cc: Andi Kleen 
Cc: "Luck, Tony" 
Cc: Andrey Panin 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman