The setup_profiling_timer() is mostly un-implemented by many
architectures.  In many places it isn't guarded by CONFIG_PROFILE which is
needed for it to be used.  Make it a weak symbol in kernel/profile.c and
remove the 'return -EINVAL' implementations from the kenrel.

There are a couple of architectures which do return 0 from the
setup_profiling_timer() function but they don't seem to do anything else
with it.  To keep the /proc compatibility for now, leave these for a
future update or removal.

On ARM, this fixes the following sparse warning:
arch/arm/kernel/smp.c:793:5: warning: symbol 'setup_profiling_timer' was not declared. Should it be static?

Link: https://lkml.kernel.org/r/20220721195509.418205-1-ben-linux@fluff.org
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.

The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.

The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size".  These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().

Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.

The kernel task that exec's init and tasks that exec user mode
helpers are also user mode tasks that just run kernel code
until they call kernel execve.

Pass kernel_clone_args into copy_thread so these oddball
tasks can be supported more cleanly and easily.

v2: Fix spelling of kenrel_clone_args on h8300
Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Pull ptrace cleanups from Eric Biederman:
 "This set of changes removes tracehook.h, moves modification of all of
  the ptrace fields inside of siglock to remove races, adds a missing
  permission check to ptrace.c

  The removal of tracehook.h is quite significant as it has been a major
  source of confusion in recent years. Much of that confusion was around
  task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
  semantics clearer).

  For people who don't know tracehook.h is a vestiage of an attempt to
  implement uprobes like functionality that was never fully merged, and
  was later superseeded by uprobes when uprobes was merged. For many
  years now we have been removing what tracehook functionaly a little
  bit at a time. To the point where anything left in tracehook.h was
  some weird strange thing that was difficult to understand"

* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ptrace: Remove duplicated include in ptrace.c
  ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
  ptrace: Return the signal to continue with from ptrace_stop
  ptrace: Move setting/clearing ptrace_message into ptrace_stop
  tracehook: Remove tracehook.h
  resume_user_mode: Move to resume_user_mode.h
  resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
  signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
  task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
  task_work: Call tracehook_notify_signal from get_signal on all architectures
  task_work: Introduce task_work_pending
  task_work: Remove unnecessary include from posix_timers.h
  ptrace: Remove tracehook_signal_handler
  ptrace: Remove arch_syscall_{enter,exit}_tracehook
  ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
  ptrace/arm: Rename tracehook_report_syscall report_syscall
  ptrace: Move ptrace_report_syscall into ptrace.h

Move set_notify_resume and tracehook_notify_resume into resume_user_mode.h.
While doing that rename tracehook_notify_resume to resume_user_mode_work.

Update all of the places that included tracehook.h for these functions to
include resume_user_mode.h instead.

Update all of the callers of tracehook_notify_resume to call
resume_user_mode_work.

Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-12-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Rename tracehook_report_syscall_{entry,exit} to
ptrace_report_syscall_{entry,exit} and place them in ptrace.h

There is no longer any generic tracehook infractructure so make
these ptrace specific functions ptrace specific.

Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

There are no remaining callers of set_fs(), so CONFIG_SET_FS
can be removed globally, along with the thread_info field and
any references to it.

This turns access_ok() into a cheaper check against TASK_SIZE_MAX.

As CONFIG_SET_FS is now gone, drop all remaining references to
set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel().

Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes
Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic]
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull signal/exit/ptrace updates from Eric Biederman:
 "This set of changes deletes some dead code, makes a lot of cleanups
  which hopefully make the code easier to follow, and fixes bugs found
  along the way.

  The end-game which I have not yet reached yet is for fatal signals
  that generate coredumps to be short-circuit deliverable from
  complete_signal, for force_siginfo_to_task not to require changing
  userspace configured signal delivery state, and for the ptrace stops
  to always happen in locations where we can guarantee on all
  architectures that the all of the registers are saved and available on
  the stack.

  Removal of profile_task_ext, profile_munmap, and profile_handoff_task
  are the big successes for dead code removal this round.

  A bunch of small bug fixes are included, as most of the issues
  reported were small enough that they would not affect bisection so I
  simply added the fixes and did not fold the fixes into the changes
  they were fixing.

  There was a bug that broke coredumps piped to systemd-coredump. I
  dropped the change that caused that bug and replaced it entirely with
  something much more restrained. Unfortunately that required some
  rebasing.

  Some successes after this set of changes: There are few enough calls
  to do_exit to audit in a reasonable amount of time. The lifetime of
  struct kthread now matches the lifetime of struct task, and the
  pointer to struct kthread is no longer stored in set_child_tid. The
  flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
  removed. Issues where task->exit_code was examined with
  signal->group_exit_code should been examined were fixed.

  There are several loosely related changes included because I am
  cleaning up and if I don't include them they will probably get lost.

  The original postings of these changes can be found at:
     https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
     https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
     https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org

  I trimmed back the last set of changes to only the obviously correct
  once. Simply because there was less time for review than I had hoped"

* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
  ptrace/m68k: Stop open coding ptrace_report_syscall
  ptrace: Remove unused regs argument from ptrace_report_syscall
  ptrace: Remove second setting of PT_SEIZED in ptrace_attach
  taskstats: Cleanup the use of task->exit_code
  exit: Use the correct exit_code in /proc/<pid>/stat
  exit: Fix the exit_code for wait_task_zombie
  exit: Coredumps reach do_group_exit
  exit: Remove profile_handoff_task
  exit: Remove profile_task_exit & profile_munmap
  signal: clean up kernel-doc comments
  signal: Remove the helper signal_group_exit
  signal: Rename group_exit_task group_exec_task
  coredump: Stop setting signal->group_exit_task
  signal: Remove SIGNAL_GROUP_COREDUMP
  signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
  signal: Make coredump handling explicit in complete_signal
  signal: Have prepare_signal detect coredumps using signal->core_state
  signal: Have the oom killer detect coredumps using signal->core_state
  exit: Move force_uaccess back into do_exit
  exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
  ...

When building ARCH=hexagon defconfig:

arch/hexagon/kernel/traps.c:217:2: error: implicit declaration of
function 'make_dead_task' [-Werror,-Wimplicit-function-declaration]
        make_dead_task(err);
        ^

The function's name is make_task_dead(), change it so there is no more
build error.

Fixes: 0e25498f8cd4 ("exit: Add and use make_task_dead.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lkml.kernel.org/r/20211227184851.2297759-2-nathan@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>

There are two big uses of do_exit.  The first is it's design use to be
the guts of the exit(2) system call.  The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.

Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure.  In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.

Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.

As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>