linux.git/arch/cris, branch v2.6.23

ide: fix hidden dependencies on CONFIG_IDE_GENERIC

2007-08-20T20:42:54+00:00

Some host drivers depend on CONFIG_IDE_GENERIC to do the probing but their
config options lack explicit dependencies on IDE_GENERIC.  In the long-term
these host drivers should be fixed to do the probing themselves but for now
fix them by making their config options select CONFIG_IDE_GENERIC.

Signed-off-by: Bartlomiej Zolnierkiewicz

cris: drivers/cdrom/Kconfig no longer exists

2007-08-11T22:47:41+00:00

scripts/kconfig/conf -d arch/cris/Kconfig
arch/cris/Kconfig:183: can't open file "drivers/cdrom/Kconfig"

Signed-off-by: Adrian Bunk 
Cc: Mikael Starvik 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild

2007-07-19T21:28:19+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (33 commits)
  xtensa: use DATA_DATA in xtensa
  powerpc: add missing DATA_DATA to powerpc
  cris: use DATA_DATA in cris
  kallsyms: remove usage of memmem and _GNU_SOURCE from scripts/kallsyms.c
  kbuild: use -fno-optimize-sibling-calls unconditionally
  kconfig: reset generated values only if Kconfig and .config agree.
  kbuild: fix the warning when running make tags
  kconfig: strip 'CONFIG_' automatically in kernel configuration search
  kbuild: use POSIX BRE in headers install target
  Whitelist references from __dbe_table to .init
  modpost white list pattern adjustment
  kbuild: do section mismatch check on full vmlinux
  kbuild: whitelist references from variables named _timer to .init.text
  kbuild: remove hardcoded _logo names from modpost
  kbuild: remove hardcoded apic_es7000 from modpost
  kbuild: warn about references from .init.text to .exit.text
  kbuild: consolidate section checks
  kbuild: refactor code in modpost to improve maintainability
  kbuild: ignore section mismatch warnings originating from .note section
  kbuild: .paravirtprobe section is obsolete, so modpost doesn't need to handle it
  ...

some kmalloc/memset ->kzalloc (tree wide)

2007-07-19T17:04:50+00:00

Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).

Here is a short excerpt of the semantic patch performing
this transformation:

@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@

 x =
- kmalloc
+ kzalloc
  (E1,E2)
  ...  when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);

@@
expression E1,E2,E3;
@@

- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)

[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Acked-by: Russell King 
Cc: Bryan Wu 
Acked-by: Jiri Slaby 
Cc: Dave Airlie 
Acked-by: Roland Dreier 
Cc: Jiri Kosina 
Acked-by: Dmitry Torokhov 
Cc: Benjamin Herrenschmidt 
Acked-by: Mauro Carvalho Chehab 
Acked-by: Pierre Ossman 
Cc: Jeff Garzik 
Cc: "David S. Miller" 
Acked-by: Greg KH 
Cc: James Bottomley 
Cc: "Antonino A. Daplas" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

define new percpu interface for shared data

2007-07-19T17:04:44+00:00

per cpu data section contains two types of data.  One set which is
exclusively accessed by the local cpu and the other set which is per cpu,
but also shared by remote cpus.  In the current kernel, these two sets are
not clearely separated out.  This can potentially cause the same data
cacheline shared between the two sets of data, which will result in
unnecessary bouncing of the cacheline between cpus.

One way to fix the problem is to cacheline align the remotely accessed per
cpu data, both at the beginning and at the end.  Because of the padding at
both ends, this will likely cause some memory wastage and also the
interface to achieve this is not clean.

This patch:

Moves the remotely accessed per cpu data (which is currently marked
as ____cacheline_aligned_in_smp) into a different section, where all the data
elements are cacheline aligned. And as such, this differentiates the local
only data and remotely accessed data cleanly.

Signed-off-by: Fenghua Yu 
Acked-by: Suresh Siddha 
Cc: Rusty Russell 
Cc: Christoph Lameter 
Cc: 
Cc: "Luck, Tony" 
Cc: Andi Kleen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

unregister_chrdev(): ignore the return value

2007-07-19T17:04:43+00:00

unregister_chrdev() always returns 0.  There is no need to check the return
value.

Signed-off-by: Akinobu Mita 
Cc: "David S. Miller" 
Cc: Takashi Iwai 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: fault feedback #2

2007-07-19T17:04:41+00:00

This patch completes Linus's wish that the fault return codes be made into
bit flags, which I agree makes everything nicer.  This requires requires
all handle_mm_fault callers to be modified (possibly the modifications
should go further and do things like fault accounting in handle_mm_fault --
however that would be for another patch).

[akpm@linux-foundation.org: fix alpha build]
[akpm@linux-foundation.org: fix s390 build]
[akpm@linux-foundation.org: fix sparc build]
[akpm@linux-foundation.org: fix sparc64 build]
[akpm@linux-foundation.org: fix ia64 build]
Signed-off-by: Nick Piggin 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Russell King 
Cc: Ian Molton 
Cc: Bryan Wu 
Cc: Mikael Starvik 
Cc: David Howells 
Cc: Yoshinori Sato 
Cc: "Luck, Tony" 
Cc: Hirokazu Takata 
Cc: Geert Uytterhoeven 
Cc: Roman Zippel 
Cc: Greg Ungerer 
Cc: Matthew Wilcox 
Cc: Paul Mackerras 
Cc: Benjamin Herrenschmidt 
Cc: Heiko Carstens 
Cc: Martin Schwidefsky 
Cc: Paul Mundt 
Cc: Kazumoto Kojima 
Cc: Richard Curnow 
Cc: William Lee Irwin III 
Cc: "David S. Miller" 
Cc: Jeff Dike 
Cc: Paolo 'Blaisorblade' Giarrusso 
Cc: Miles Bader 
Cc: Chris Zankel 
Acked-by: Kyle McMartin 
Acked-by: Haavard Skinnemoen 
Acked-by: Ralf Baechle 
Acked-by: Andi Kleen 
Signed-off-by: Andrew Morton 
[ Still apparently needs some ARM and PPC loving - Linus ]
Signed-off-by: Linus Torvalds

PTRACE_POKEDATA consolidation

2007-07-17T17:23:03+00:00

Identical implementations of PTRACE_POKEDATA go into generic_ptrace_pokedata()
function.

AFAICS, fix bug on xtensa where successful PTRACE_POKEDATA will nevertheless
return EPERM.

Signed-off-by: Alexey Dobriyan 
Cc: Christoph Hellwig 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

PTRACE_PEEKDATA consolidation

2007-07-17T17:23:03+00:00

Identical implementations of PTRACE_PEEKDATA go into generic_ptrace_peekdata()
function.

Signed-off-by: Alexey Dobriyan 
Cc: Christoph Hellwig 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

cris: use DATA_DATA in cris

2007-07-17T12:55:38+00:00

* Sam Ravnborg (sam@ravnborg.org) wrote:
> From your patch it looks like I originally missed out
> powerpc + xtensa when introducing DATA_DATA - would be nice if
> you could fix that.
>

Use DATA_DATA in CRIS

Signed-off-by: Mathieu Desnoyers 
Cc: Mikael Starvik 
Signed-off-by: Sam Ravnborg