linux.git/arch/cris/include, branch v2.6.39

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

remove dma64_addr_t

2011-03-24T02:47:18+00:00

There is no user now.

Signed-off-by: FUJITA Tomonori 
Cc: David Miller 
Cc: Ralf Baechle 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

bitops: remove minix bitops from asm/bitops.h

2011-03-24T02:46:22+00:00

minix bit operations are only used by minix filesystem and useless by
other modules.  Because byte order of inode and block bitmaps is different
on each architecture like below:

m68k:
	big-endian 16bit indexed bitmaps

h8300, microblaze, s390, sparc, m68knommu:
	big-endian 32 or 64bit indexed bitmaps

m32r, mips, sh, xtensa:
	big-endian 32 or 64bit indexed bitmaps for big-endian mode
	little-endian bitmaps for little-endian mode

Others:
	little-endian bitmaps

In order to move minix bit operations from asm/bitops.h to architecture
independent code in minix filesystem, this provides two config options.

CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k.
CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use
native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu,
m32r, mips, sh, xtensa).  The architectures which always use little-endian
bitmaps do not select these options.

Finally, we can remove minix bit operations from asm/bitops.h for all
architectures.

Signed-off-by: Akinobu Mita 
Acked-by: Arnd Bergmann 
Acked-by: Greg Ungerer 
Cc: Geert Uytterhoeven 
Cc: Roman Zippel 
Cc: Andreas Schwab 
Cc: Martin Schwidefsky 
Cc: Heiko Carstens 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: "David S. Miller" 
Cc: Hirokazu Takata 
Acked-by: Ralf Baechle 
Acked-by: Paul Mundt 
Cc: Chris Zankel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

bitops: remove ext2 non-atomic bitops from asm/bitops.h

2011-03-24T02:46:21+00:00

As the result of conversions, there are no users of ext2 non-atomic bit
operations except for ext2 filesystem itself.  Now we can put them into
architecture independent code in ext2 filesystem, and remove from
asm/bitops.h for all architectures.

Signed-off-by: Akinobu Mita 
Cc: Jan Kara 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

bitops: introduce little-endian bitops for most architectures

2011-03-24T02:46:15+00:00

Introduce little-endian bit operations to the big-endian architectures
which do not have native little-endian bit operations and the
little-endian architectures.  (alpha, avr32, blackfin, cris, frv, h8300,
ia64, m32r, mips, mn10300, parisc, sh, sparc, tile, x86, xtensa)

These architectures can just include generic implementation
(asm-generic/bitops/le.h).

Signed-off-by: Akinobu Mita 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Mikael Starvik 
Cc: David Howells 
Cc: Yoshinori Sato 
Cc: "Luck, Tony" 
Cc: Ralf Baechle 
Cc: Kyle McMartin 
Cc: Matthew Wilcox 
Cc: Grant Grundler 
Cc: Paul Mundt 
Cc: Kazumoto Kojima 
Cc: Hirokazu Takata 
Cc: "David S. Miller" 
Cc: Chris Zankel 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Acked-by: Hans-Christian Egtvedt 
Acked-by: "H. Peter Anvin" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

add the common dma_addr_t typedef to include/linux/types.h

2011-03-23T00:44:09+00:00

All architectures can use the common dma_addr_t typedef now. We can
remove the arch specific dma_addr_t.

Signed-off-by: FUJITA Tomonori 
Acked-by: Arnd Bergmann 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Ivan Kokshaysky 
Cc: Richard Henderson 
Cc: Matt Turner 
Cc: "Luck, Tony" 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Heiko Carstens 
Cc: Martin Schwidefsky 
Cc: Chris Metcalf 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: NUMA aware alloc_thread_info_node()

2011-03-23T00:44:01+00:00

Add a node parameter to alloc_thread_info(), and change its name to
alloc_thread_info_node()

This change is needed to allow NUMA aware kthread_create_on_cpu()

Signed-off-by: Eric Dumazet 
Acked-by: David S. Miller 
Reviewed-by: Andi Kleen 
Acked-by: Rusty Russell 
Cc: Tejun Heo 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: David Howells 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

tree-wide: fix comment/printk typos

2010-11-01T19:38:34+00:00

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Jiri Kosina

mm: remove pte_*map_nested()

2010-10-26T23:52:08+00:00

Since we no longer need to provide KM_type, the whole pte_*map_nested()
API is now redundant, remove it.

Signed-off-by: Peter Zijlstra 
Acked-by: Chris Metcalf 
Cc: David Howells 
Cc: Hugh Dickins 
Cc: Rik van Riel 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Steven Rostedt 
Cc: Russell King 
Cc: Ralf Baechle 
Cc: David Miller 
Cc: Paul Mackerras 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

2010-10-23T02:59:04+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
  serial8250: ratelimit "too much work" error
  serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
  serial: abstraction for 8250 legacy ports
  serial/imx: check that the buffer is non-empty before sending it out
  serial: mfd: add more baud rates support
  jsm: Remove the uart port on errors
  Alchemy: Add UART PM methods.
  8250: allow platforms to override PM hook.
  altera_uart: Don't use plain integer as NULL pointer
  altera_uart: Fix missing prototype for registering an early console
  altera_uart: Fixup type usage of port flags
  altera_uart: Make it possible to use Altera UART and 8250 ports together
  altera_uart: Add support for different address strides
  altera_uart: Add support for getting mapbase and IRQ from resources
  altera_uart: Add support for polling mode (IRQ-less)
  serial: Factor out uart_poll_timeout() from 8250 driver
  serial: mark the 8250 driver as maintained
  serial: 8250: Don't delay after transmitter is ready.
  tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
  vcs: invoke the vt update callback when /dev/vcs* is written to
  ...