Pull probes fixes from Masami Hiramatsu:

 - Documentation update: Add a note about argument and return value
   fetching is the best effort because it depends on the type.

 - objpool: Fix to make internal global variables static in
   test_objpool.c.

 - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
   same prototypes in asm/kprobes.h for some architectures, but some of
   them are missing the prototype and it causes a warning. So move the
   prototype into linux/kprobes.h.

 - tracing: Fix to check the tracepoint event and return event at
   parsing stage. The tracepoint event doesn't support %return but if
   $retval exists, it will be converted to %return silently. This finds
   that case and rejects it.

 - tracing: Fix the order of the descriptions about the parameters of
   __kprobe_event_gen_cmd_start() to be consistent with the argument
   list of the function.

* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix the order of argument descriptions
  tracing: fprobe-event: Fix to check tracepoint event and return
  kprobes: unify kprobes_exceptions_nofify() prototypes
  lib: test_objpool: make global variables static
  Documentation: tracing: Add a note about argument and retval access

Pull arm64 fixes from Catalin Marinas:
 "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
  MediaTek firmware:

   - Move the MediaTek GIC quirk handling from irqchip to core. Before
     the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable
     pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
     addressed this issue. Fixed now at a deeper level in the arch code

   - Reject events meant for other PMUs in the CoreSight PMU driver,
     otherwise some of the core PMU events would disappear

   - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
     causing some events to be invisible

   - Remove duplicate declaration of __arm64_sys##name following the
     patch to avoid prototype warning for syscalls

   - Typos in the elf_hwcap documentation"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/syscall: Remove duplicate declaration
  Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
  arm64: Move MediaTek GIC quirk handling from irqchip to core
  arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
  perf: arm_cspmu: Reject events meant for other PMUs
  Documentation/arm64: Fix typos in elf_hwcaps

Pull MIPS updates from Thomas Bogendoerfer:

 - removed AR7 platform support

 - cleanups and fixes

* tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: AR7: remove platform
  watchdog: ar7_wdt: remove driver to prepare for platform removal
  vlynq: remove bus driver
  mtd: parsers: ar7: remove support
  serial: 8250: remove AR7 support
  arch: mips: remove ReiserFS from defconfig
  MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h>
  MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning
  MIPS: KVM: Fix a build warning about variable set but not used
  MIPS: Remove dead code in relocate_new_kernel
  mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2
  mips: dts: ralink: mt7621: define each reset as an item
  mips: dts: ingenic: Remove unneeded probe-type properties
  MIPS: loongson32: Remove dma.h and nand.h

Most architectures that support kprobes declare this function in their
own asm/kprobes.h header and provide an override, but some are missing
the prototype, which causes a warning for the __weak stub implementation:

kernel/kprobes.c:1865:12: error: no previous prototype for 'kprobe_exceptions_notify' [-Werror=missing-prototypes]
 1865 | int __weak kprobe_exceptions_notify(struct notifier_block *self,

Move the prototype into linux/kprobes.h so it is visible to all
the definitions.

Link: https://lore.kernel.org/all/20231108125843.3806765-4-arnd@kernel.org/

Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull iommu updates from Joerg Roedel:
 "Core changes:
   - Make default-domains mandatory for all IOMMU drivers
   - Remove group refcounting
   - Add generic_single_device_group() helper and consolidate drivers
   - Cleanup map/unmap ops
   - Scaling improvements for the IOVA rcache depot
   - Convert dart & iommufd to the new domain_alloc_paging()

  ARM-SMMU:
   - Device-tree binding update:
       - Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
   - SMMUv2:
       - Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
   - SMMUv3:
       - Large refactoring of the context descriptor code to move the CD
         table into the master, paving the way for '->set_dev_pasid()'
         support on non-SVA domains
   - Minor cleanups to the SVA code

  Intel VT-d:
   - Enable debugfs to dump domain attached to a pasid
   - Remove an unnecessary inline function

  AMD IOMMU:
   - Initial patches for SVA support (not complete yet)

  S390 IOMMU:
   - DMA-API conversion and optimized IOTLB flushing

  And some smaller fixes and improvements"

* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
  iommu/dart: Remove the force_bypass variable
  iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
  iommu/dart: Convert to domain_alloc_paging()
  iommu/dart: Move the blocked domain support to a global static
  iommu/dart: Use static global identity domains
  iommufd: Convert to alloc_domain_paging()
  iommu/vt-d: Use ops->blocked_domain
  iommu/vt-d: Update the definition of the blocking domain
  iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
  Revert "iommu/vt-d: Remove unused function"
  iommu/amd: Remove DMA_FQ type from domain allocation path
  iommu: change iommu_map_sgtable to return signed values
  iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
  iommu/vt-d: debugfs: Support dumping a specified page table
  iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
  iommu/vt-d: debugfs: Dump entry pointing to huge page
  iommu/vt-d: Remove unused function
  iommu/arm-smmu-v3-sva: Remove bond refcount
  iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
  iommu/arm-smmu-v3: Rename cdcfg to cd_table
  ...

The driver used to truncate several 64-bit registers such as PMCEID[n]
registers used to describe whether architectural and microarchitectural
events in range 0x4000-0x401f exist. Due to discarding the bits, the
driver made the events invisible, even if they existed.

Moreover, PMCCFILTR and PMCR registers have additional bits in the upper
32 bits. This patch makes them available although they aren't currently
used. Finally, functions handling PMXEVCNTR and PMXEVTYPER registers are
removed as they not being used at all.

Fixes: df29ddf4f04b ("arm64: perf: Abstract system register accesses away")
Reported-by: Carl Worth <carl@os.amperecomputing.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/..
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20231102183012.1251410-1-ilkka@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull media updates from Mauro Carvalho Chehab:

 - the old V4L2 core videobuf kAPI was finally removed. All media
   drivers should now be using VB2 kAPI

 - new automotive driver: mgb4

 - new platform video driver: npcm-video

 - new sensor driver: mt9m114

 - new TI driver used in conjunction with Cadence CSI2RX IP to bridge
   TI-specific parts

 - ir-rx51 was removed and the N900 DT binding was moved to the
   pwm-ir-tx generic driver

 - drop atomisp-specific ov5693, using the upstream driver instead

 - the camss driver has gained RDI3 support for VFE 17x

 - the atomisp driver now detects ISP2400 or ISP2401 at run time. No
   need to set it up at build time anymore

 - lots of driver fixes, cleanups and improvements

* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
  media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
  media: venus: Fix firmware path for resources
  media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
  media: venus: hfi_parser: Add check to keep the number of codecs within range
  media: venus: hfi: add checks to handle capabilities from firmware
  media: venus: hfi: fix the check to handle session buffer requirement
  media: venus: hfi: add checks to perform sanity on queue pointers
  media: platform: cadence: select MIPI_DPHY dependency
  media: MAINTAINERS: Fix path for J721E CSI2RX bindings
  media: cec: meson: always include meson sub-directory in Makefile
  media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
  media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
  media: mediatek: vcodec: using encoder device to alloc/free encoder memory
  media: imx-jpeg: notify source chagne event when the first picture parsed
  media: cx231xx: Use EP5_BUF_SIZE macro
  media: siano: Drop unnecessary error check for debugfs_create_dir/file()
  media: mediatek: vcodec: Handle invalid encoder vsi
  media: aspeed: Drop unnecessary error check for debugfs_create_file()
  Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
  Documentation: media: gen-errors.rst: fix confusing ENOTTY description
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Implement the binary search in modpost for faster symbol lookup

 - Respect HOSTCC when linking host programs written in Rust

 - Change the binrpm-pkg target to generate kernel-devel RPM package

 - Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE

 - Unify vdso_install rules

 - Remove unused __memexit* annotations

 - Eliminate stale whitelisting for __devinit/__devexit from modpost

 - Enable dummy-tools to handle the -fpatchable-function-entry flag

 - Add 'userldlibs' syntax

* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kbuild: support 'userldlibs' syntax
  kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
  kbuild: Correct missing architecture-specific hyphens
  modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
  modpost: merge sectioncheck table entries regarding init/exit sections
  modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
  modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
  modpost: remove EXIT_SECTIONS macro
  modpost: remove MEM_INIT_SECTIONS macro
  modpost: remove more symbol patterns from the section check whitelist
  modpost: disallow *driver to reference .meminit* sections
  linux/init: remove __memexit* annotations
  modpost: remove ALL_EXIT_DATA_SECTIONS macro
  kbuild: simplify cmd_ld_multi_m
  kbuild: avoid too many execution of scripts/pahole-flags.sh
  kbuild: remove ARCH_POSTLINK from module builds
  kbuild: unify no-compiler-targets and no-sync-config-targets
  kbuild: unify vdso_install rules
  docs: kbuild: add INSTALL_DTBS_PATH
  UML: remove unused cmd_vdso_install
  ...

Pull pin control updates from Linus Walleij:
 "No pin control core changes this time.

  New drivers:

   - Realtek RTD family pin control driver and RTD1619B, RTD1319D and
     RTD1315E subdrivers

   - Nuvoton NPCM8xx combined pin control and GPIO driver

   - Amlogic T7 pin control driver

   - Renesas RZ/G3S pin control driver

  Improvements:

   - A number of additional UART groups added to the Mediatek MT7981
     driver

   - MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660

   - Extra GPIO banks for the Sunxi H616

   - MLSP I2C6 function support in Qualcomm MSM8226

   - Some __counted_by() annotations for dynamic arrays

   - Ongoing work to make remove() return void

   - LSBC groups and functions in the Renesas R8A7778"

* tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
  pinctrl: Use device_get_match_data()
  dt-bindings: pinctrl: qcom,sa8775p-tlmm: add missing wakeup-parent
  dt-bindings: pinctrl: nuvoton,npcm845: Add missing additionalProperties on gpio child nodes
  dt-bindings: pinctrl: brcm: Ensure all child node properties are documented
  pinctrl: renesas: rzn1: Convert to platform remove callback returning void
  pinctrl: renesas: rzg2l: Add RZ/G3S support
  dt-bindings: pinctrl: renesas: Document RZ/G3S SoC
  pinctrl: renesas: rzg2l: Add support for different DS values on different groups
  pinctrl: renesas: rzg2l: Move DS and OI to SoC-specific configuration
  pinctrl: renesas: rzg2l: Adapt function number for RZ/G3S
  pinctrl: renesas: rzg2l: Adapt for different SD/PWPR register offsets
  pinctrl: renesas: rzg2l: Index all registers based on port offset
  pinctrl: renesas: rzg2l: Add validation of GPIO pin in rzg2l_gpio_request()
  pinctrl: renesas: r8a7778: Add LBSC pins, groups, and functions
  pinctrl: intel: fetch community only when we need it
  pinctrl: cherryview: reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
  pinctrl: cherryview: Convert to platform remove callback returning void
  pinctrl: sprd-sc9860: Convert to platform remove callback returning void
  pinctrl: qcom/msm: Convert to platform remove callback returning void
  pinctrl: qcom/lpi: Convert to platform remove callback returning void
  ...

Pull tty and serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.7-rc1. Included
  in here are:

   - console/vgacon cleanups and removals from Arnd

   - tty core and n_tty cleanups from Jiri

   - lots of 8250 driver updates and cleanups

   - sc16is7xx serial driver updates

   - dt binding updates

   - first set of port lock wrapers from Thomas for the printk fixes
     coming in future releases

   - other small serial and tty core cleanups and updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
  serdev: Replace custom code with device_match_acpi_handle()
  serdev: Simplify devm_serdev_device_open() function
  serdev: Make use of device_set_node()
  tty: n_gsm: add copyright Siemens Mobility GmbH
  tty: n_gsm: fix race condition in status line change on dead connections
  serial: core: Fix runtime PM handling for pending tx
  vgacon: fix mips/sibyte build regression
  dt-bindings: serial: drop unsupported samsung bindings
  tty: serial: samsung: drop earlycon support for unsupported platforms
  tty: 8250: Add note for PX-835
  tty: 8250: Fix IS-200 PCI ID comment
  tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  tty: 8250: Add support for Intashield IX cards
  tty: 8250: Add support for additional Brainboxes PX cards
  tty: 8250: Fix up PX-803/PX-857
  tty: 8250: Fix port count of PX-257
  tty: 8250: Add support for Intashield IS-100
  tty: 8250: Add support for Brainboxes UP cards
  tty: 8250: Add support for additional Brainboxes UC cards
  tty: 8250: Remove UC-257 and UC-431
  ...