Pull asm-generic updates from Arnd Bergmann:
 "These are cleanups for architecture specific header files:

   - the comments in include/linux/syscalls.h have gone out of sync and
     are really pointless, so these get removed

   - The asm/bitsperlong.h header no longer needs to be architecture
     specific on modern compilers, so use a generic version for newer
     architectures that use new enough userspace compilers

   - A cleanup for virt_to_pfn/virt_to_bus to have proper type checking,
     forcing the use of pointers"

* tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  syscalls: Remove file path comments from headers
  tools arch: Remove uapi bitsperlong.h of hexagon and microblaze
  asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
  m68k/mm: Make pfn accessors static inlines
  arm64: memory: Make virt_to_pfn() a static inline
  ARM: mm: Make virt_to_pfn() a static inline
  asm-generic/page.h: Make pfn accessors static inlines
  xen/netback: Pass (void *) to virt_to_page()
  netfs: Pass a pointer to virt_to_page()
  cifs: Pass a pointer to virt_to_page() in cifsglob
  cifs: Pass a pointer to virt_to_page()
  riscv: mm: init: Pass a pointer to virt_to_page()
  ARC: init: Pass a pointer to virt_to_pfn() in init
  m68k: Pass a pointer to virt_to_pfn() virt_to_page()
  fs/proc/kcore.c: Pass a pointer to virt_addr_valid()

Pull SoC fixes from Arnd Bergmann:
 "There are three small fixes that came up sincie the past week:

   - an incorrect bit offset in ixp4xx bus driver

   - a riscv randconfig regression in the thead platform I merged

   - whitespace fixes for some dts files"

* tag 'soc-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  bus: ixp4xx: fix IXP4XX_EXP_T1_MASK
  ARM: dts: st: add missing space before {
  RISC-V: make ARCH_THEAD preclude XIP_KERNEL

Add missing whitespace between node name/label and opening {.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230705150033.293832-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull crypto updates from Herbert Xu:
 "API:
   - Add linear akcipher/sig API
   - Add tfm cloning (hmac, cmac)
   - Add statesize to crypto_ahash

  Algorithms:
   - Allow only odd e and restrict value in FIPS mode for RSA
   - Replace LFSR with SHA3-256 in jitter
   - Add interface for gathering of raw entropy in jitter

  Drivers:
   - Fix race on data_avail and actual data in hwrng/virtio
   - Add hash and HMAC support in starfive
   - Add RSA algo support in starfive
   - Add support for PCI device 0x156E in ccp"

* tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits)
  crypto: akcipher - Do not copy dst if it is NULL
  crypto: sig - Fix verify call
  crypto: akcipher - Set request tfm on sync path
  crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled
  hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS
  hwrng: st - keep clock enabled while hwrng is registered
  hwrng: st - support compile-testing
  hwrng: imx-rngc - fix the timeout for init and self check
  KEYS: asymmetric: Use new crypto interface without scatterlists
  KEYS: asymmetric: Move sm2 code into x509_public_key
  KEYS: Add forward declaration in asymmetric-parser.h
  crypto: sig - Add interface for sign/verify
  crypto: akcipher - Add sync interface without SG lists
  crypto: cipher - On clone do crypto_mod_get()
  crypto: api - Add __crypto_alloc_tfmgfp
  crypto: api - Remove crypto_init_ops()
  crypto: rsa - allow only odd e and restrict value in FIPS mode
  crypto: geniv - Split geniv out of AEAD Kconfig option
  crypto: algboss - Add missing dependency on RNG2
  crypto: starfive - Add RSA algo support
  ...

Pull slab updates from Vlastimil Babka:

 - SLAB deprecation:

   Following the discussion at LSF/MM 2023 [1] and no objections, the
   SLAB allocator is deprecated by renaming the config option (to make
   its users notice) to CONFIG_SLAB_DEPRECATED with updated help text.
   SLUB should be used instead. Existing defconfigs with CONFIG_SLAB are
   also updated.

 - SLAB_NO_MERGE kmem_cache flag (Jesper Dangaard Brouer):

   There are (very limited) cases where kmem_cache merging is
   undesirable, and existing ways to prevent it are hacky. Introduce a
   new flag to do that cleanly and convert the existing hacky users.
   Btrfs plans to use this for debug kernel builds (that use case is
   always fine), networking for performance reasons (that should be very
   rare).

 - Replace the usage of weak PRNGs (David Keisar Schmidt):

   In addition to using stronger RNGs for the security related features,
   the code is a bit cleaner.

 - Misc code cleanups (SeongJae Parki, Xiongwei Song, Zhen Lei, and
   zhaoxinchao)

Link: https://lwn.net/Articles/932201/ [1]

* tag 'slab-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm/slab_common: use SLAB_NO_MERGE instead of negative refcount
  mm/slab: break up RCU readers on SLAB_TYPESAFE_BY_RCU example code
  mm/slab: add a missing semicolon on SLAB_TYPESAFE_BY_RCU example code
  mm/slab_common: reduce an if statement in create_cache()
  mm/slab: introduce kmem_cache flag SLAB_NO_MERGE
  mm/slab: rename CONFIG_SLAB to CONFIG_SLAB_DEPRECATED
  mm/slab: remove HAVE_HARDENED_USERCOPY_ALLOCATOR
  mm/slab_common: Replace invocation of weak PRNG
  mm/slab: Replace invocation of weak PRNG
  slub: Don't read nr_slabs and total_objects directly
  slub: Remove slabs_node() function
  slub: Remove CONFIG_SMP defined check
  slub: Put objects_show() into CONFIG_SLUB_DEBUG enabled block
  slub: Correct the error code when slab_kset is NULL
  mm/slab: correct return values in comment for _kmem_cache_create()

Pull ARM SoC updates from Arnd Bergmann:
 "These are mostly minor cleanups and bugfixes that address harmless
  problems.

  The largest branch is a conversion of the omap platform to use GPIO
  descriptors throughout the tree, for any devices that are not fully
  converted to devicetree.

  The Samsung Exynos platform gains back support for the Exynos4212 chip
  that was previously unused and removed but is now used for the Samsung
  Galaxy Tab3"

* tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  ARM: omap2: Fix copy/paste bug
  MAINTAINERS: Replace my email address
  Input: ads7846 - fix pointer cast warning
  Input: ads7846 - Fix usage of match data
  ARM: omap2: Fix checkpatch issues
  arm: omap1: replace printk() with pr_err macro
  ARM: omap: Fix checkpatch issues
  ARM: s3c: Switch i2c drivers back to use .probe()
  ARM: versatile: mark mmc_status() static
  ARM: spear: include "pl080.h" for pl080_get_signal() prototype
  ARM: sa1100: address missing prototype warnings
  ARM: pxa: fix missing-prototypes warnings
  ARM: orion5x: fix d2net gpio initialization
  ARM: omap2: fix missing tick_broadcast() prototype
  ARM: omap1: add missing include
  ARM: lpc32xx: add missing include
  ARM: imx: add missing include
  ARM: highbank: add missing include
  ARM: ep93xx: fix missing-prototype warnings
  ARM: davinci: fix davinci_cpufreq_init() declaration
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "The arm64 defconfig file gets the usual updates to enable addition
  device drivers as well as the sparx5 and realtek SoC platforms.

  For arm32, there are only a couple of cleanup patches for imx, renesas
  and rockchips"

* tag 'soc-defconfig-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
  arm64: defconfig: Enable Rockchip I2S TDM and ES8316 drivers
  arm64: defconfig: update RK8XX MFD config
  ARM: multi_v7_defconfig: update MFD_RK808 name
  arm64: defconfig: Enable UBIFS
  arm64: defconfig: enable drivers for Verdin AM62
  arm64: defconfig: Build SM6115 display and GPU clock controller drivers
  arm64: defconfig: Build display clock controller driver for QCM2290
  arm64: defconfig: Build interconnect driver for QCM2290
  arm64: defconfig: Build Global Clock Controller driver for QCM2290
  arm64: defconfig: Build MSM power manager driver
  arm64: defconfig: Enable sc828x0xp lpasscc clock controller
  arm64: defconfig: Enable the TI SN65DSI83 driver
  arm64: defconfig: Enable Renesas MTU3a counter config
  arm64: defconfig: enable Mediatek PMIC key
  arm64: defconfig: enable MT6357 regulator
  ARM: imx_v6_v7_defconfig: Remove KERNEL_LZO config
  arm64: defconfig: Enable ipq6018 apss clock and PLL controller
  arm64: defconfig: Enable ARCH_SPARX5 and ARCH_REALTEK
  arm64: defconfig: enable FSA4480 driver as module
  ARM: shmobile: defconfig: Refresh for v6.4-rc1
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "Nothing surprising in the SoC specific drivers, with the usual
  updates:

   - Added or improved SoC driver support for Tegra234, Exynos4121,
     RK3588, as well as multiple Mediatek and Qualcomm chips

   - SCMI firmware gains support for multiple SMC/HVC transport and
     version 3.2 of the protocol

   - Cleanups amd minor changes for the reset controller, memory
     controller, firmware and sram drivers

   - Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
     amlogic and renesas SoC specific drivers"

* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
  dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
  MAINTAINERS: add PHY-related files to Amlogic SoC file list
  drivers: meson: secure-pwrc: always enable DMA domain
  tee: optee: Use kmemdup() to replace kmalloc + memcpy
  soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
  dt-bindings: sram: qcom,imem: document qdu1000
  soc: qcom: icc-bwmon: Fix MSM8998 count unit
  dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
  soc: qcom: socinfo: Add Soc ID for IPQ5300
  dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
  soc: qcom: Fix a IS_ERR() vs NULL bug in probe
  soc: qcom: socinfo: Add support for new fields in revision 19
  soc: qcom: socinfo: Add support for new fields in revision 18
  dt-bindings: firmware: scm: Add compatible for SDX75
  soc: qcom: mdt_loader: Fix split image detection
  dt-bindings: memory-controllers: drop unneeded quotes
  soc: rockchip: dtpm: use C99 array init syntax
  firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
  soc/tegra: pmc: Use devm_clk_notifier_register()
  soc/tegra: pmc: Simplify debugfs initialization
  ...

Pull ARM SoC devicetree updates from Arnd Bergmann:
 "The biggest change this time is for the 32-bit devicetree files, which
  are all moved to a new location, using separate subdirectories for
  each SoC vendor, following the same scheme that is used on arm64, mips
  and riscv. This has been discussed for many years, but so far we never
  did this as there was a plan to move the files out of the kernel
  entirely, which has never happened.

  The impact of this will be that all external patches no longer apply,
  and anything depending on the location of the dtb files in the build
  directory will have to change. The installed files after 'make
  dtbs_install' keep the current location.

  There are six added SoCs here that are largely variants of previously
  added chips. Two other chips are added in a separate branch along with
  their device drivers.

   - The Samsung Exynos 4212 makes its return after the Samsung Galaxy
     Express phone is addded at last. The SoC support was originally
     added in 2012 but removed again in 2017 as it was unused at the
     time.

   - Amlogic C3 is a Cortex-A35 based smart IP camera chip

   - Qualcomm MSM8939 (Snapdragon 615) is a more featureful variant of
     the still common MSM8916 (Snapdragon 410) phone chip that has been
     supported for a long time.

   - Qualcomm SC8180x (Snapdragon 8cx) is one of their earlier high-end
     laptop chips, used in the Lenovo Flex 5G, which is added along with
     the reference board.

   - Qualcomm SDX75 is the latest generation modem chip that is used as
     a peripherial in phones but can also run a standalone Linux. Unlike
     the prior 32-bit SDX65 and SDX55, this now has a 64-bit Cortex-A55.

   - Alibaba T-Head TH1520 is a quad-core RISC-V chip based on the
     Xuantie C910 core, a step up from all previously added rv64 chips.

  All of the above come with reference board implementations, those
  included there are 39 new board files, but only five more 32-bit this
  time, probably a new low:

   - Marantec Maveo board based on dhcor imx6ull module

   - Endian 4i Edge 200, based on the armv5 Marvell Kirkwood chip

   - Epson Moverio BT-200 AR glasses based on TI OMAP4

   - PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM

   - ICnova ADB4006 board based on Allwinner A20

  On the 64-bit side, there are also fewer addded machines than we had
  in the recent releases:

   - Three boards based on NXP i.MX8: Emtop SoM & Baseboard, NXP i.MX8MM
     EVKB board and i.MX8MP based Gateworks Venice gw7905-2x device.

   - NVIDIA IGX Orin and Jetson Orin Nano boards, both based on tegra234

   - Qualcomm gains support for 6 reference boards on various members of
     their IPQ networking SoC series, as well as the Sony Xperia M4 Aqua
     phone, the Acer Aspire 1 laptop, and the Fxtec Pro1X board on top
     of the various reference platforms for their new chips.

   - Rockchips support for several newer boards: Indiedroid Nova
     (rk3588), Edgeble Neural Compute Module 6B (rk3588), FriendlyARM
     NanoPi R2C Plus (rk3328), Anbernic RG353PS (rk3566), Lunzn
     Fastrhino R66S/R68S (rk3568)

   - TI K3/AM625 based PHYTEC phyBOARD-Lyra-AM625 board and Toradex
     Verdin family with AM62 COM, carrier and dev boards

  Other changes to existing boards contain the usual minor improvements
  along with

   - continued updates to clean up dts files based on dtc warnings and
     binding checks, in particular cache properties and node names

   - support for devicetree overlays on at91, bcm283x

   - significant additions to existing SoC support on mediatek,
     qualcomm, ti k3 family, starfive jh71xx, NXP i.MX6 and i.MX8, ST
     STM32MP1

  As usual, a lot more detail is available in the individual merge
  commits"

* tag 'soc-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (926 commits)
  ARM: mvebu: fix unit address on armada-390-db flash
  ARM: dts: Move .dts files to vendor sub-directories
  kbuild: Support flat DTBs install
  ARM: dts: Add .dts files missing from the build
  ARM: dts: allwinner: Use quoted #include
  ARM: dts: lan966x: kontron-d10: add PHY interrupts
  ARM: dts: lan966x: kontron-d10: fix SPI CS
  ARM: dts: lan966x: kontron-d10: fix board reset
  ARM: dts: at91: Enable device-tree overlay support for AT91 boards
  arm: dts: Enable device-tree overlay support for AT91 boards
  arm64: dts: exynos: Remove clock from Exynos850 pmu_system_controller
  ARM: dts: at91: use generic name for shutdown controller
  ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
  dt-bindings: firmware: brcm,kona-smc: convert to YAML
  riscv: dts: sort makefile entries by directory
  riscv: defconfig: enable T-HEAD SoC
  MAINTAINERS: add entry for T-HEAD RISC-V SoC
  riscv: dts: thead: add sipeed Lichee Pi 4A board device tree
  riscv: dts: add initial T-HEAD TH1520 SoC device tree
  riscv: Add the T-HEAD SoC family Kconfig option
  ...

Pull drm updates from Dave Airlie:
 "There is one set of patches to misc for a i915 gsc/mei proxy driver.

  Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
  of refactoring.

  core:
   - replace strlcpy with strscpy
   - EDID changes to support further conversion to struct drm_edid
   - Move i915 DSC parameter code to common DRM helpers
   - Add Colorspace functionality

  aperture:
   - ignore framebuffers with non-primary devices

  fbdev:
   - use fbdev i/o helpers
   - add Kconfig options for fb_ops helpers
   - use new fb io helpers directly in drivers

  sysfs:
   - export DRM connector ID

  scheduler:
   - Avoid an infinite loop

  ttm:
   - store function table in .rodata
   - Add query for TTM mem limit
   - Add NUMA awareness to pools
   - Export ttm_pool_fini()

  bridge:
   - fsl-ldb: support i.MX6SX
   - lt9211, lt9611: remove blanking packets
   - tc358768: implement input bus formats, devm cleanups
   - ti-snd65dsi86: implement wait_hpd_asserted
   - analogix: fix endless probe loop
   - samsung-dsim: support swapped clock, fix enabling, support var
     clock
   - display-connector: Add support for external power supply
   - imx: Fix module linking
   - tc358762: Support reset GPIO

  panel:
   - nt36523: Support Lenovo J606F
   - st7703: Support Anbernic RG353V-V2
   - InnoLux G070ACE-L01 support
   - boe-tv101wum-nl6: Improve initialization
   - sharp-ls043t1le001: Mode fixes
   - simple: BOE EV121WXM-N10-1850, S6D7AA0
   - Ampire AM-800480L1TMQW-T00H
   - Rocktech RK043FN48H
   - Starry himax83102-j02
   - Starry ili9882t

  amdgpu:
   - add new ctx query flag to handle reset better
   - add new query/set shadow buffer for rdna3
   - DCN 3.2/3.1.x/3.0.x updates
   - Enable DC_FP on loongarch
   - PCIe fix for RDNA2
   - improve DC FAMS/SubVP support for better power management
   - partition support for lots of engines
   - Take NUMA into account when allocating memory
   - Add new DRM_AMDGPU_WERROR config parameter to help with CI
   - Initial SMU13 overdrive support
   - Add support for new colorspace KMS API
   - W=1 fixes

  amdkfd:
   - Query TTM mem limit rather than hardcoding it
   - GC 9.4.3 partition support
   - Handle NUMA for partitions
   - Add debugger interface for enabling gdb
   - Add KFD event age tracking

  radeon:
   - Fix possible UAF

  i915:
   - new getparam for PXP support
   - GSC/MEI proxy driver
   - Meteorlake display enablement
   - avoid clearing preallocated framebuffers with TTM
   - implement framebuffer mmap support
   - Disable sampler indirect state in bindless heap
   - Enable fdinfo for GuC backends
   - GuC loading and firmware table handling fixes
   - Various refactors for multi-tile enablement
   - Define MOCS and PAT tables for MTL
   - GSC/MEI support for Meteorlake
   - PMU multi-tile support
   - Large driver kernel doc cleanup
   - Allow VRR toggling and arbitrary refresh rates
   - Support async flips on linear buffers on display ver 12+
   - Expose CRTC CTM property on ILK/SNB/VLV
   - New debugfs for display clock frequencies
   - Hotplug refactoring
   - Display refactoring
   - I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
   - Use large rings for compute contexts
   - HuC loading for MTL
   - Allow user to set cache at BO creation
   - MTL powermanagement enhancements
   - Switch to dedicated workqueues to stop using flush_scheduled_work()
   - Move display runtime init under display/
   - Remove 10bit gamma on desktop gen3 parts, they don't support it

  habanalabs:
   - uapi: return 0 for user queries if there was a h/w or f/w error
   - Add pci health check when we lose connection with the firmware.
     This can be used to distinguish between pci link down and firmware
     getting stuck.
   - Add more info to the error print when TPC interrupt occur.
   - Firmware fixes

  msm:
   - Adreno A660 bindings
   - SM8350 MDSS bindings fix
   - Added support for DPU on sm6350 and sm6375 platforms
   - Implemented tearcheck support to support vsync on SM150 and newer
     platforms
   - Enabled missing features (DSPP, DSC, split display) on sc8180x,
     sc8280xp, sm8450
   - Added support for DSI and 28nm DSI PHY on MSM8226 platform
   - Added support for DSI on sm6350 and sm6375 platforms
   - Added support for display controller on MSM8226 platform
   - A690 GPU support
   - Move cmdstream dumping out of fence signaling path
   - a610 support
   - Support for a6xx devices without GMU

  nouveau:
   - NULL ptr before deref fixes

  armada:
   - implement fbdev emulation as client

  sun4i:
   - fix mipi-dsi dotclock
   - release clocks

  vc4:
   - rgb range toggle property
   - BT601 / BT2020 HDMI support

  vkms:
   - convert to drmm helpers
   - add reflection and rotation support
   - fix rgb565 conversion

  gma500:
   - fix iomem access

  shmobile:
   - support renesas soc platform
   - enable fbdev

  mxsfb:
   - Add support for i.MX93 LCDIF

  stm:
   - dsi: Use devm_ helper
   - ltdc: Fix potential invalid pointer deref

  renesas:
   - Group drivers in renesas subdirectory to prepare for new platform
   - Drop deprecated R-Car H3 ES1.x support

  meson:
   - Add support for MIPI DSI displays

  virtio:
   - add sync object support

  mediatek:
   - Add display binding document for MT6795"

* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
  drm/i915: Fix a NULL vs IS_ERR() bug
  drm/i915: make i915_drm_client_fdinfo() reference conditional again
  drm/i915/huc: Fix missing error code in intel_huc_init()
  drm/i915/gsc: take a wakeref for the proxy-init-completion check
  drm/msm/a6xx: Add A610 speedbin support
  drm/msm/a6xx: Add A619_holi speedbin support
  drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
  drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
  drm/msm/a6xx: Fix some A619 tunables
  drm/msm/a6xx: Add A610 support
  drm/msm/a6xx: Add support for A619_holi
  drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
  drm/msm/a6xx: Introduce GMU wrapper support
  drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
  drm/msm/a6xx: Extend and explain UBWC config
  drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
  drm/msm/a6xx: Add a helper for software-resetting the GPU
  drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
  drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
  drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
  ...