Amlogic Fixes for v6.15:
- fix reference to unknown/untested PWM clock on ARM/ARM64 boards
- fix missing clkc_audio node on dreambox ARM64 DT

* tag 'amlogic-fixes-for-v6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  arm64: dts: amlogic: dreambox: fix missing clkc_audio node
  arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock
  arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock
  ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM clock
  ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock

Link: https://lore.kernel.org/r/e9c520a1-b986-49e1-b9b1-67511c187716@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX fixes for 6.15:

- An i.MX8MP change from Ahmad Fatoum to fix the broken nominal device
  tree caused by commit 9f7595b3e5ae ("arm64: dts: imx8mp: configure
  GPU and NPU clocks to overdrive rate")
- A MAINTAINERS update from Michael Riesch to exclude Sony IMX image
  sensor drivers from i.MX entry
- A i.MX95 device tree change from Richard Zhu to correct the range of
  PCIe app-reg region
- An opos6ul device tree change from Sébastien Szymanski to fix
  an Ethernet regression caused by commit c7e73b5051d6 ("ARM: imx:
  mach-imx6ul: remove 14x14 EVK specific PHY fixup")
- An imx8mm-verdin device tree change from Wojciech Dubowik to fix
  a SD card regression caused by commit f5aab0438ef1 ("regulator:
  pca9450: Fix enable register for LDO5")

* tag 'imx-fixes-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mm-verdin: Link reg_usdhc2_vqmmc to usdhc2
  MAINTAINERS: add exclude for dt-bindings to imx entry
  ARM: dts: opos6ul: add ksz8081 phy properties
  arm64: dts: imx95: Correct the range of PCIe app-reg region
  arm64: dts: imx8mp: configure GPU and NPU clocks in nominal DTSI

Device-tree expects absent clocks to be specified as <0> (instead of
using <>). This fixes using the FCLK4/FCLK3 clocks as they are now
seen at their correct index (while before they were recognized, but at
the correct index - resulting in the hardware using a different clock
than what the kernel sees).

Fixes: dbf921861985 ("ARM: dts: amlogic: meson8b: switch to the new PWM controller binding")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250420164801.330505-3-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Device-tree expects absent clocks to be specified as <0> (instead of
using <>). This fixes using the FCLK4/FCLK3 clocks as they are now
seen at their correct index (while before they were recognized, but at
the correct index - resulting in the hardware using a different clock
than what the kernel sees).

Fixes: 802cff460aab ("ARM: dts: amlogic: meson8: switch to the new PWM controller binding")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250420164801.330505-2-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Commit c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific
PHY fixup") removed a PHY fixup that setted the clock mode and the LED
mode.
Make the Ethernet interface work again by doing as advised in the
commit's log, set clock mode and the LED mode in the device tree.

Fixes: c7e73b5051d6 ("ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull CRC cleanups from Eric Biggers:
 "Finish cleaning up the CRC kconfig options by removing the remaining
  unnecessary prompts and an unnecessary 'default y', removing
  CONFIG_LIBCRC32C, and documenting all the CRC library options"

* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
  lib/crc: remove CONFIG_LIBCRC32C
  lib/crc: document all the CRC library kconfig options
  lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
  lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
  lib/crc: remove unnecessary prompt for CONFIG_CRC16
  lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
  lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'

Pull timer cleanups from Thomas Gleixner:
 "A set of final cleanups for the timer subsystem:

   - Convert all del_timer[_sync]() instances over to the new
     timer_delete[_sync]() API and remove the legacy wrappers.

     Conversion was done with coccinelle plus some manual fixups as
     coccinelle chokes on scoped_guard().

   - The final cleanup of the hrtimer_init() to hrtimer_setup()
     conversion.

     This has been delayed to the end of the merge window, so that all
     patches which have been merged through other trees are in mainline
     and all new users are catched.

  Doing this right before rc1 ensures that new code which is merged post
  rc1 is not introducing new instances of the original functionality"

* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracing/timers: Rename the hrtimer_init event to hrtimer_setup
  hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
  hrtimers: Rename debug_init() to debug_setup()
  hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
  hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
  hrtimers: Make callback function pointer private
  hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
  hrtimers: Switch to use __htimer_setup()
  hrtimers: Delete hrtimer_init()
  treewide: Convert new and leftover hrtimer_init() users
  treewide: Switch/rename to timer_delete[_sync]()

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

All modules that need CONFIG_CRC_ITU_T already select it, so there is no
need to bother users about the option.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>

All modules that need CONFIG_CRC_T10DIF already select it, so there is no
need to bother users about the option.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>