The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node have "spi-slave" property must with "#address-cells = <0>" and "#size-cells = <0>". But currently both "#address-cells" and "#size-cells" properties are deleted, the corresponding default values are 2 and 1. As a result, the check fails and below warnings is displayed. arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \ /soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3 arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \ Failed prerequisite 'spi_bus_bridge' Because the value of "#size-cells" is already defined as zero in the node "ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to explicitly add "#address-cells = <0>" and keep "#size-cells" no change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201207084752.1665-2-thunder.leizhen@huawei.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These definitions are evidently left over from the days when
sparsemem settings were platform specific. This was no longer
the case when the platform got merged.
There was no warning in the past, but now the asm/sparsemem.h
header ends up being included indirectly, causing this warning:
In file included from /git/arm-soc/arch/arm/mach-keystone/keystone.c:24:
arch/arm/mach-keystone/memory.h:10:9: warning: 'SECTION_SIZE_BITS' macro redefined [-Wmacro-redefined]
#define SECTION_SIZE_BITS 34
^
arch/arm/include/asm/sparsemem.h:23:9: note: previous definition is here
#define SECTION_SIZE_BITS 28
^
Clearly the definitions never had any effect here, so remove them.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201203231847.1484900-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 5.10, round 5:
- Fix a regression on SoC revision detection with ANATOP, that is
introduced by commit 4a4fb66119eb ("ARM: imx: Add missing
of_node_put()").
- Drop PAD_GPIO_6 from imx6qdl-wandboard ENET pin group, as the pin is
used by camera sensor now.
- Fix I2C3_SCL pinmux on imx6qdl-kontron-samx6i board, so that SoM EEPROM
can be accessed.
* tag 'imx-fixes-5.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin
ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp
ARM: imx: Use correct SRC base address
Link: https://lore.kernel.org/r/20201201091820.GW4072@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A few more RGMII-ID fixes, and a bunch of other more random fixes * tag 'sunxi-fixes-for-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY ARM: dts: sun8i: v3s: fix GIC node memory range ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: s3: pinecube: align compatible property to other S3 boards ARM: sunxi: Add machine match for the Allwinner V3 SoC arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet Link: https://lore.kernel.org/r/1280f1de-1b6d-4cc2-8448-e5a9096a41e8.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.10-rc7 that resolve a number of reported issues, and add some new device ids. Nothing major here, but these solve some problems that people were having with the 5.10-rc tree: - reverts for USB storage dma settings that broke working devices - thunderbolt use-after-free fix - cdns3 driver fixes - gadget driver userspace copy fix - new device ids All of these except for the reverts have been in linux-next with no reported issues. The reverts are "clean" and were tested by Hans, as well as passing the 0-day tests" * tag 'usb-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_fs: Use local copy of descriptors for userspace copy usb: ohci-omap: Fix descriptor conversion Revert "usb-storage: fix sdev->host->dma_dev" Revert "uas: fix sdev->host->dma_dev" Revert "uas: bump hw_max_sectors to 2048 blocks for SS or faster drives" USB: serial: kl5kusb105: fix memleak on open USB: serial: ch341: sort device-id entries USB: serial: ch341: add new Product ID for CH341A USB: serial: option: fix Quectel BG96 matching usb: cdns3: core: fix goto label for error path usb: cdns3: gadget: clear trb->length as zero after preparing every trb usb: cdns3: Fix hardware based role switch USB: serial: option: add support for Thales Cinterion EXS82 USB: serial: option: add Fibocom NL668 variants thunderbolt: Fix use-after-free in remove_unplugged_switch()
Pull Kbuild fixes from Masahiro Yamada: - Move -Wcast-align to W=3, which tends to be false-positive and there is no tree-wide solution. - Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a preprocessor option and makes sense for .S files as well. - Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings. - Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings. - Fix undesirable line breaks in *.mod files. * tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: avoid split lines in .mod files kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1 kbuild: Hoist '--orphan-handling' into Kconfig Kbuild: do not emit debug info for assembly with LLVM_IAS=1 kbuild: use -fmacro-prefix-map for .S sources Makefile.extrawarn: move -Wcast-align to W=3
While I was doing zram testing, I found sometimes decompression failed
since the compression buffer was corrupted. With investigation, I found
below commit calls cond_resched unconditionally so it could make a
problem in atomic context if the task is reschedule.
BUG: sleeping function called from invalid context at mm/vmalloc.c:108
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog
3 locks held by memhog/946:
#0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160
#1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160
#2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0
CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
Call Trace:
unmap_kernel_range_noflush+0x2eb/0x350
unmap_kernel_range+0x14/0x30
zs_unmap_object+0xd5/0xe0
zram_bvec_rw.isra.0+0x38c/0x8e0
zram_rw_page+0x90/0x101
bdev_write_page+0x92/0xe0
__swap_writepage+0x94/0x4a0
pageout+0xe3/0x3a0
shrink_page_list+0xb94/0xd60
shrink_inactive_list+0x158/0x460
We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which
contains the offending calling code) from zsmalloc.
Even though this option showed some amount improvement(e.g., 30%) in
some arm32 platforms, it has been headache to maintain since it have
abused APIs[1](e.g., unmap_kernel_range in atomic context).
Since we are approaching to deprecate 32bit machines and already made
the config option available for only builtin build since v5.8, lastly it
has been not default option in zsmalloc, it's time to drop the option
for better maintenance.
[1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org
Fixes: e47110e90584 ("mm/vunmap: add cond_resched() in vunmap_pmd_range")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Harish Sriram <harish@linux.ibm.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There were a bunch of issues with the patch converting the
OMAP1 OSK board to use descriptors for controlling the USB
host:
- The chip label was incorrect
- The GPIO offset was off-by-one
- The code should use sleeping accessors
This patch tries to fix all issues at the same time.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Fixes: 15d157e87443 ("usb: ohci-omap: Convert to use GPIO descriptors")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201130083033.29435-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, '--orphan-handling=warn' is spread out across four different architectures in their respective Makefiles, which makes it a little unruly to deal with in case it needs to be disabled for a specific linker version (in this case, ld.lld 10.0.1). To make it easier to control this, hoist this warning into Kconfig and the main Makefile so that disabling it is simpler, as the warning will only be enabled in a couple places (main Makefile and a couple of compressed boot folders that blow away LDFLAGS_vmlinx) and making it conditional is easier due to Kconfig syntax. One small additional benefit of this is saving a call to ld-option on incremental builds because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN. To keep the list of supported architectures the same, introduce CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to gain this automatically after all of the sections are specified and size asserted. A special thanks to Kees Cook for the help text on this config. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use the correct pin for the i2c scl signal else we can't access the
SoM eeprom.
Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module")
Signed-off-by: Bernd Bauer <bernd.bauer@anton-paar.com>
[m.felsch@pengutronix.de: Adapt commit message]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>