Pull KVM fixes from Radim Krčmář:
 "KVM:
   - lock kvm_device list to prevent corruption on device creation.

  PPC:
   - split debugfs initialization from creation of the xics device to
     unlock the newly taken kvm lock earlier.

  s390:
   - prevent userspace from triggering two WARN_ON_ONCE.

  MIPS:
   - fix several issues in the management of TLB faults (Cc: stable)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  MIPS: KVM: Propagate kseg0/mapped tlb fault errors
  MIPS: KVM: Fix gfn range check in kseg0 tlb faults
  MIPS: KVM: Add missing gfn range check
  MIPS: KVM: Fix mapped fault broken commpage handling
  KVM: Protect device ops->create and list_add with kvm->lock
  KVM: PPC: Move xics_debugfs_init out of create
  KVM: s390: reset KVM_REQ_MMU_RELOAD if mapping the prefix failed
  KVM: s390: set the prefix initially properly

KVM devices were manipulating list data structures without any form of
synchronization, and some implementations of the create operations also
suffered from a lack of synchronization.

Now when we've split the xics create operation into create and init, we
can hold the kvm->lock mutex while calling the create operation and when
manipulating the devices list.

The error path in the generic code gets slightly ugly because we have to
take the mutex again and delete the device from the list, but holding
the mutex during anon_inode_getfd or releasing/locking the mutex in the
common non-error path seemed wrong.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Pull ARM SoC fixes from Arnd Bergmann:
 "A couple of bug fixes have come in for v4.8 so far.  Since the first
  few were originally meant to go into -rc1 (but didn't get sent in time
  for travel reasons), the branch is unfortunately based on top of a
  commit in the middle of the merge window rather than -rc1.

  Content-wise we have:

   - a fix for the last remaining broken build in kernelci, getting
     mach-shmobile to build again with SMP disabled

   - a fix for a realview regression that broke real hardware but not
     the qemu model that everyone uses in practice (needed for v4.7 as
     well)

   - a merge conflict fix for Tegra that also broke v4.7

   - two Kconfig fixes for arm64 build regressions

   - a couple of arm32 build warning fixes (all harmless)

   - fix the RTC on Exynos7 Espresso (which apparently never worked
     right)"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  Merge tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux into randconfig-4.8
  arm64: Kconfig: select HISILICON_IRQ_MBIGEN only if PCI is selected
  arm64: Kconfig: select ALPINE_MSI only if PCI is selected
  ARM: dts: realview: Fix PBX-A9 cache description
  ARM: tegra: fix erroneous address in dts
  ARM: dts: add syscon compatible string for AP syscon
  ARM: dts: add syscon compatible string for CP syscon
  ARM: oxnas: select reset controller framework
  ARM: hide mach-*/ include for ARM_SINGLE_ARMV7M
  ARM: don't include removed directories
  Revert "ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME"
  ARM: shmobile: don't call platform_can_secondary_boot on UP
  MAINTAINER: alpine: add a mailing list
  ARM: do away with final ARCH_REQUIRE_GPIOLIB
  arm64: dts: Fix RTC by providing rtc_src clock

This is the pxa changes for v4.8 cycle.

This is a tiny fix couple to enable changes in includes in
gpio API without breaking pxa boards.

* tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux:
  ARM: pxa: add module.h for corgi symbol_get/symbol_put usage
  ARM: pxa: add module.h for spitz symbol_get/symbol_put usage

Merge misc fixes from Andrew Morton:
 "8 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/slub.c: run free_partial() outside of the kmem_cache_node->list_lock
  rmap: fix compound check logic in page_remove_file_rmap
  mm, rmap: fix false positive VM_BUG() in page_add_file_rmap()
  mm/page_alloc.c: recalculate some of node threshold when on/offline memory
  mm/page_alloc.c: fix wrong initialization when sysctl_min_unmapped_ratio changes
  thp: move shmem_huge_enabled() outside of SYSFS ifdef
  revert "ARM: keystone: dts: add psci command definition"
  rapidio: dereferencing an error pointer

Revert commit 51d5d12b8f3d ("ARM: keystone: dts: add psci command
definition"), which was inadvertently added twice.

Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Clearly QEMU is very permissive in how its PL310 model may be set up,
but the real hardware turns out to be far more particular about things
actually being correct. Fix up the DT description so that the real
thing actually boots:

- The arm,data-latency and arm,tag-latency properties need 3 cells to
  be valid, otherwise we end up retaining the default 8-cycle latencies
  which leads pretty quickly to lockup.
- The arm,dirty-latency property is only relevant to L210/L220, so get
  rid of it.
- The cache geometry override also leads to lockup and/or general
  misbehaviour. Irritatingly, the manual doesn't state the actual PL310
  configuration, but based on the boardfile code and poking registers
  from the Boot Monitor, it would seem to be 8 sets of 16KB ways.

With that, we can successfully boot to enjoy the fun of mismatched FPUs...

Cc: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
quirk, wrong addresses were introduced. Fix it and use the correct
addresses.

Thierry let me know, that there is another patch (b5896f67ab3c in
linux-next) in preparation which removes all the '0,' prefixes of unit
addresses on Tegra124 and is planned to go upstream in 4.8, so
this patch will get reverted then.

But for the moment, this patch is necessary to fix current misbehaviour.

Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Cc: stable@vger.kernel.org # v4.7
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This syscon needs to be looked up by clocks, flash protection
and other consumers.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This syscon needs to be looked up by flash protection, CLCD
display output settings and other consumers.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>