linux.git/arch/arm, branch v4.0-rc2 Linux kernel source tree Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2015-03-01T20:00:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-03-01T20:00:25+00:00 640c0f5c57864cbc1f495509bdc879fab94d4d9d Pull timer fixes from Ingo Molnar: "Three clockevents/clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: pxa: Fix section mismatch clocksource: mtk: Fix race conditions in probe code clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig 
Pull timer fixes from Ingo Molnar:
 "Three clockevents/clocksource driver fixes"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: pxa: Fix section mismatch
  clocksource: mtk: Fix race conditions in probe code
  clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig
ARM: multi_v7_defconfig: Enable shmobile platforms 2015-02-26T15:36:09+00:00 Geert Uytterhoeven geert+renesas@glider.be 2015-02-24T14:14:45+00:00 4a3a6f86693922b29cf829c63f652b057f14619e Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Enable support for shmobile platforms that became multi-platform aware.
Several non-critical drivers and subsystems are built as modules, to keep
kernel size reasonable.

Tested on:
  - r8a73a4/ape6evm:
      - U-Boot fails with "Error: unrecognized/unsupported machine ID",
      - kexec works.
  - r8a7740/armadillo:
      - Hermit boot loader fails (larger image, more memory corruption),
      - kexec works.
  - r8a7791/koelsch,
  - sh73a0/kzm9g:
      - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n,
      - kexec works.
  - am335x/boneblack.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig 2015-02-25T09:28:22+00:00 Daniel Lezcano daniel.lezcano@linaro.org 2015-02-23T18:54:16+00:00 a8b1b9fc927400045fb7631d5b12093aaf5d939d The Kconfig options for the asm9260 timer is wrong as it can be selected by another platform with allyes config and thus leading to a compilation failure as some non arch related code is pulled by the compilation. Fix this by having the platform Kconfig to select the timer as it is done for the others drivers. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Oleksij Rempel <linux@rempel-privat.de> Conflicts: drivers/clocksource/Kconfig 
The Kconfig options for the asm9260 timer is wrong as it can be selected by
another platform with allyes config and thus leading to a compilation failure
as some non arch related code is pulled by the compilation.

Fix this by having the platform Kconfig to select the timer as it is done for
the others drivers.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Oleksij Rempel <linux@rempel-privat.de>

Conflicts:
	drivers/clocksource/Kconfig
ARM: dts: am335x-bone*: usb0 is hardwired for peripheral 2015-02-24T18:35:44+00:00 Robert Nelson robertcnelson@gmail.com 2015-02-24T16:10:43+00:00 67fd14b3eca63b14429350e9eadc5fab709a8821 Fixes: http://bugs.elinux.org/issues/127 the bb.org community was seeing random reboots before this change. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
Fixes: http://bugs.elinux.org/issues/127

the bb.org community was seeing random reboots before this change.

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: dra7x-evm: beagle-x15: Fix USB Host 2015-02-24T18:35:43+00:00 Roger Quadros rogerq@ti.com 2015-02-24T12:37:07+00:00 addfcde7c485781c9bc076bb7a20faf3e07554ad In commit 87517d26d888 ("ARM: dts: dra7-evm: Add extcon nodes for USB") we enabled Extcon USB gpio to tackle the USB ID pin and get peripheral mode to work. But the extcon-gpio-usb driver [1] didn't make it into v4.0 and this makes the USB driver defer probe indefinitely breaking USB Host functionality. As a temporary fix we remove the extcon handle from the USB controller and add it back when the extcon driver merges in v4.1. [1] - https://lkml.org/lkml/2015/2/2/187 Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
In commit 87517d26d888 ("ARM: dts: dra7-evm: Add extcon nodes for USB")
we enabled Extcon USB gpio to tackle the USB ID pin and get
peripheral mode to work.

But the extcon-gpio-usb driver [1] didn't make it into v4.0
and this makes the USB driver defer probe indefinitely breaking
USB Host functionality.

As a temporary fix we remove the extcon handle from the
USB controller and add it back when the extcon driver
merges in v4.1.

[1] - https://lkml.org/lkml/2015/2/2/187

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: omap2plus_defconfig: Fix SATA boot 2015-02-24T18:35:43+00:00 Roger Quadros rogerq@ti.com 2015-02-23T15:18:37+00:00 acd83a1652dc60cfb5b3e6f061f48b87044c9b20 SATA operation depends on PIPE3 PHY and if we want to boot from SATA drives, we have to have the PIPE3 PHY driver built-in. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
SATA operation depends on PIPE3 PHY and if we want
to boot from SATA drives, we have to have the PIPE3 PHY
driver built-in.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver 2015-02-24T18:35:43+00:00 Roger Quadros rogerq@ti.com 2015-02-23T15:18:36+00:00 f8c360588ccdaa80b8878688653d41417589cdc7 Without this NAND doesn't work on most EVMs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
Without this NAND doesn't work on most EVMs.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: dra7: Correct the dma controller's property names 2015-02-24T18:35:43+00:00 Peter Ujfalusi peter.ujfalusi@ti.com 2015-02-20T13:42:06+00:00 08d9b327e6289a9fdf6c3fe9830053bb099d820a According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: omap5: Correct the dma controller's property names 2015-02-24T18:35:43+00:00 Peter Ujfalusi peter.ujfalusi@ti.com 2015-02-20T13:42:05+00:00 951c1c04c63906d7ba9462741d42a947ea838bf7 According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: dts: omap4: Correct the dma controller's property names 2015-02-24T18:35:43+00:00 Peter Ujfalusi peter.ujfalusi@ti.com 2015-02-20T13:42:04+00:00 24ac17704943aaa2fb5e5d4b9dffc911aec41d88 According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>