linux.git/arch/arm, branch v3.12-rc2 Linux kernel source tree Merge tag 'pm+acpi-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2013-09-20T22:17:14+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-09-20T22:17:14+00:00 2457aaf73a97a97c8596ed3903bd09601976f3bc Pull ACPI and power management fixes from Rafael Wysocki: 1) Four fixes for cpufreq regressions introduced by the changes that removed Device Tree parsing for CPU device nodes from cpufreq drivers from Sudeep KarkadaNagesha. 2) Two fixes for recent cpufreq regressions introduced by changes related to the preservation of sysfs attributes over system suspend/resume cycles from Viresh Kumar. 3) Fix for ACPI-based wakeup signaling in the PCI subsystem that fails to stop PME polling for devices put into the D3cold power state from Rafael J Wysocki. 4) Fix for bad interactions between cpufreq and udev on systems supporting intel_pstate where acpi-cpufreq is available as well from Yinghai Lu. * tag 'pm+acpi-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: return EEXIST instead of EBUSY for second registering PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup ARM: shmobile: change dev_id to cpu0 while registering cpu clock ARM: i.MX: change dev_id to cpu0 while registering cpu clock cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device cpufreq: unlock correct rwsem while updating policy->cpu cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish() 
Pull ACPI and power management fixes from Rafael Wysocki:

 1) Four fixes for cpufreq regressions introduced by the changes that
    removed Device Tree parsing for CPU device nodes from cpufreq
    drivers from Sudeep KarkadaNagesha.

 2) Two fixes for recent cpufreq regressions introduced by changes
    related to the preservation of sysfs attributes over system
    suspend/resume cycles from Viresh Kumar.

 3) Fix for ACPI-based wakeup signaling in the PCI subsystem that
    fails to stop PME polling for devices put into the D3cold power
    state from Rafael J Wysocki.

 4) Fix for bad interactions between cpufreq and udev on systems
    supporting intel_pstate where acpi-cpufreq is available as well
    from Yinghai Lu.

* tag 'pm+acpi-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: return EEXIST instead of EBUSY for second registering
  PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup
  ARM: shmobile: change dev_id to cpu0 while registering cpu clock
  ARM: i.MX: change dev_id to cpu0 while registering cpu clock
  cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device
  cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device
  cpufreq: unlock correct rwsem while updating policy->cpu
  cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish()
ARM: shmobile: change dev_id to cpu0 while registering cpu clock 2013-09-19T01:53:44+00:00 Sudeep KarkadaNagesha sudeep.karkadanagesha@arm.com 2013-09-10T17:59:49+00:00 e4a6a29d1250022a885123cc0a04bd176b508854 Currently all clkdev registration use "cpufreq-cpu0.0" as dev_id for cpu clock which refers to virtual platform device. It needs to be "cpu0" instead which is actual cpu0 device id. This patch changes the dev_id from "cpufreq-cpu0.0" to "cpu0". Reported-and-tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Currently all clkdev registration use "cpufreq-cpu0.0" as dev_id
for cpu clock which refers to virtual platform device. It needs to
be "cpu0" instead which is actual cpu0 device id.

This patch changes the dev_id from "cpufreq-cpu0.0" to "cpu0".

Reported-and-tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Magnus Damm <damm@opensource.se>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ARM: i.MX: change dev_id to cpu0 while registering cpu clock 2013-09-19T01:53:44+00:00 Sudeep KarkadaNagesha sudeep.karkadanagesha@arm.com 2013-09-10T17:59:48+00:00 3d10a887de7ffe704687c9a77abaac9fbe5e9208 Currently all clkdev registration use "cpufreq-cpu0.0" as dev_id for cpu clock which refers to virtual platform device. It needs to be "cpu0" instead which is actual cpu0 device id. This patch changes the dev_id from "cpufreq-cpu0.0" to "cpu0". Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Currently all clkdev registration use "cpufreq-cpu0.0" as dev_id
for cpu clock which refers to virtual platform device. It needs to
be "cpu0" instead which is actual cpu0 device id.

This patch changes the dev_id from "cpufreq-cpu0.0" to "cpu0".

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device 2013-09-19T01:53:43+00:00 Sudeep KarkadaNagesha sudeep.karkadanagesha@arm.com 2013-09-10T17:59:47+00:00 b494b48dacb4dd848d76bc8871e55716486f0253 Commit cdc58d602d2e657602a90c190cbf745886c95977 "cpufreq: imx6q-cpufreq: remove device tree parsing for cpu nodes" assumed the pdev->dev is set to cpu0 device in the platform code. But it actually points to the virtual cpufreq-cpu0 platform device which is not present in the device tree. Most of the information needed by cpufreq is stored in cpu0 DT node. So cpu_dev must point to cpu0 device. This patch fixes the wrong assignment to cpu_dev. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Commit cdc58d602d2e657602a90c190cbf745886c95977 "cpufreq: imx6q-cpufreq:
remove device tree parsing for cpu nodes" assumed the pdev->dev is set to
cpu0 device in the platform code. But it actually points to the virtual
cpufreq-cpu0 platform device which is not present in the device tree.
Most of the information needed by cpufreq is stored in cpu0 DT node.
So cpu_dev must point to cpu0 device.

This patch fixes the wrong assignment to cpu_dev.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'omap-for-v3.12/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes 2013-09-18T21:01:39+00:00 Olof Johansson olof@lixom.net 2013-09-18T21:01:39+00:00 660e1c2f47f51f5b03ea7f63fa11f000e0240bda From Tony Lindgren, OMAP DT fixes for 3.12-rc1: OMAP device tree changes that are needed to fix regressions and avoid electrical issues on beaglebone black. Via Benoit Cousson <bcousson@baylibre.com>: Fix BBB LDO voltage to avoid HDMI destruction Fix OMAP5 wrong attribute Fix typo in beagle xM strings Fix missing pinmux and regulator for OMAP4 wifi Fix missing pinmux for igep headset * tag 'omap-for-v3.12/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: igep00x0: Add pinmux configuration for MCBSP2 ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard ARM: dts: OMAP5: fix ocp2scp DTS data ARM: dts: OMAP5: fix reg property size ARM: dts: am335x-bone*: add DT for BeagleBone Black ARM: dts: omap3-beagle-xm: fix string error in compatible property Signed-off-by: Olof Johansson <olof@lixom.net> 
From Tony Lindgren, OMAP DT fixes for 3.12-rc1:

OMAP device tree changes that are needed to fix regressions and avoid
electrical issues on beaglebone black.

Via Benoit Cousson <bcousson@baylibre.com>:

Fix BBB LDO voltage to avoid HDMI destruction
Fix OMAP5 wrong attribute
Fix typo in beagle xM strings
Fix missing pinmux and regulator for OMAP4 wifi
Fix missing pinmux for igep headset

* tag 'omap-for-v3.12/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: igep00x0: Add pinmux configuration for MCBSP2
  ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze
  ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard
  ARM: dts: OMAP5: fix ocp2scp DTS data
  ARM: dts: OMAP5: fix reg property size
  ARM: dts: am335x-bone*: add DT for BeagleBone Black
  ARM: dts: omap3-beagle-xm: fix string error in compatible property

Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'omap-for-v3.12/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes 2013-09-18T21:00:43+00:00 Olof Johansson olof@lixom.net 2013-09-18T21:00:43+00:00 90e17dccd59c6649cfb450a14da4b66e9f6f884d From Tony Lindgren, fixes for 3.12-rc1: OMAP fixes for build warnings and cpuidle, and a few trivial typo fixes. * tag 'omap-for-v3.12/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: mux: fix trivial typo in name ARM: OMAP4 SMP: Corrected a typo fucntions to functions ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally mailbox: remove unnecessary platform_set_drvdata() ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y ARM: OMAP: fix return value check in omap_device_build_from_dt() ARM: OMAP4: Fix clock_get error for GPMC during boot Signed-off-by: Olof Johansson <olof@lixom.net> 
From Tony Lindgren, fixes for 3.12-rc1:

OMAP fixes for build warnings and cpuidle, and a few trivial typo fixes.

* tag 'omap-for-v3.12/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: mux: fix trivial typo in name
  ARM: OMAP4 SMP: Corrected a typo fucntions to functions
  ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally
  mailbox: remove unnecessary platform_set_drvdata()
  ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y
  ARM: OMAP: fix return value check in omap_device_build_from_dt()
  ARM: OMAP4: Fix clock_get error for GPMC during boot

Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: multi_v7: add HREFv60 to multi_v7 defconfig 2013-09-18T19:16:08+00:00 Linus Walleij linus.walleij@linaro.org 2013-09-16T12:22:32+00:00 3244aae5757d1117113a78ddb9f97845d5a4e49a This is just a standard board for the Ux500, include it in the v7 multiplatform defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> 
This is just a standard board for the Ux500, include it in the
v7 multiplatform defconfig.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: OMAP2+: mux: fix trivial typo in name 2013-09-18T19:02:01+00:00 Phil Carmody phil.carmody@partner.samsung.com 2013-09-18T19:02:01+00:00 e942cc06e2d183975dd47d8da9e569316cb870ea Fix trivial typo in name. Signed-off-by: Phil Carmody <phil.carmody@partner.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
Fix trivial typo in name.

Signed-off-by: Phil Carmody <phil.carmody@partner.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: OMAP4 SMP: Corrected a typo fucntions to functions 2013-09-18T19:02:00+00:00 Anoop Thomas Mathew atm@profoundis.com 2013-09-18T19:02:00+00:00 b6b2485214d2b6af534ae433b588c0bb76fe78af Corrected the functions spelling mistake in the OMAP4 SMP source file. Signed-off-by: Anoop Thomas Mathew <atm@profoundis.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
Corrected the functions spelling mistake in the OMAP4 SMP source file.

Signed-off-by: Anoop Thomas Mathew <atm@profoundis.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally 2013-09-18T19:02:00+00:00 Vladimir Murzin murzin.v@gmail.com 2013-09-18T19:02:00+00:00 783502719cdf066fcb91f37c77728916730ae60f We call cpu_cluster_pm_enter for dev->cpu == 0 only, but cpu_cluster_pm_exit called without that check. Because of that unhandled page fault may happen: [ 3.803405] Unable to handle kernel paging request at virtual address 00002500 [ 3.810974] pgd = c0004000 [ 3.813812] [00002500] *pgd=00000000 [ 3.817596] Internal error: Oops: 5 [#1] SMP ARM [ 3.822418] Modules linked in: [ 3.825653] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc6+ #21 [ 3.832397] task: ed86ef40 ti: ed896000 task.ti: ed896000 [ 3.838073] PC is at irq_notifier+0x234/0x25c [ 3.842651] LR is at irq_notifier+0x218/0x25c [ 3.847229] pc : [<c0029ed8>] lr : [<c0029ebc>] psr: 80000193 [ 3.847229] sp : ed897ee8 ip : 00000005 fp : 00000001 [ 3.859283] r10: c0b395f0 r9 : c0b30594 r8 : c0b8c2ac [ 3.864776] r7 : ffffffff r6 : 00000000 r5 : 00000005 r4 : 00000000 [ 3.871643] r3 : 00002500 r2 : 00000000 r1 : 00000005 r0 : 44302244 [ 3.878479] Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 3.886260] Control: 10c5387d Table: 8000404a DAC: 00000015 [ 3.892272] Process swapper/1 (pid: 0, stack limit = 0xed896240) [ 3.898590] Stack: (0xed897ee8 to 0xed898000) [ 3.903167] 7ee0: c0979c3a 00000001 ed897ef8 ed896000 c0014f7c 00000000 [ 3.911743] 7f00: 00000005 00000000 ffffffff c0b8c2ac c0b395f0 c077c04c c0c94b48 c0b3953c [ 3.920318] 7f20: c0bcd928 00000002 c0b39524 c00cfad8 00000000 ffffffff 00000000 c00cfb10 [ 3.928924] 7f40: c14e62c0 c002c1c8 c002c0ac c14e62c0 00000002 e251c37d 00000000 c0b39548 [ 3.937499] 7f60: c0b395f0 c05a1bc4 e251c37d 00000000 00000005 c05a3870 edc90380 edc90380 [ 3.946105] 7f80: edc90394 c14e62c0 c0b39548 00000002 c0784064 c05a3c78 c0b395e0 c14e62c0 [ 3.954681] 7fa0: 00000002 c0b39548 c0bc9db8 00000000 00000001 c05a1dc0 ed896000 00000015 [ 3.963287] 7fc0: c0bc9db8 ed896000 8000406a c0b30594 c0784064 c000e504 00000746 c007a528 [ 3.971862] 7fe0: 00000001 0000001d 600001d3 c0bcc004 00000000 800086c4 ee0aa6a7 d2aabaa9 [ 3.980499] [<c0029ed8>] (irq_notifier+0x234/0x25c) from [<c077c04c>] (notifier_call_chain+0x38/0x68) [ 3.990173] [<c077c04c>] (notifier_call_chain+0x38/0x68) from [<c00cfad8>] (cpu_pm_notify+0x20/0x38) [ 3.999786] [<c00cfad8>] (cpu_pm_notify+0x20/0x38) from [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50) [ 4.009399] [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50) from [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c) [ 4.020111] [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c) from [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec) [ 4.030822] [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec) from [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240) [ 4.041870] [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240) from [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228) [ 4.052947] [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228) from [<c000e504>] (arch_cpu_idle+0x8/0x38) [ 4.062499] [<c000e504>] (arch_cpu_idle+0x8/0x38) from [<c007a528>] (cpu_startup_entry+0x178/0x1e4) [ 4.071990] [<c007a528>] (cpu_startup_entry+0x178/0x1e4) from [<800086c4>] (0x800086c4) [ 4.080383] Code: e5922288 03a03b0a 13a03c25 e0823003 (e5932000) [ 4.086791] ---[ end trace d83954a84a6fa69e ]--- It is supposed that sar_base is initialized in irq_save_context, which is called on CPU_CLUSTER_PM_ENTER notification. If this notification has been missed and CPU_CLUSTER_PM_EXIT is received sar_base is NULL. Fix it by calling CPU_CLUSTER_PM_{ENTER,EXIT} under the same condition. Signed-off-by: Vladimir Murzin <murzin.v@gmail.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> 
We call cpu_cluster_pm_enter for dev->cpu == 0 only, but
cpu_cluster_pm_exit called without that check.

Because of that unhandled page fault may happen:

[    3.803405] Unable to handle kernel paging request at virtual address 00002500
[    3.810974] pgd = c0004000
[    3.813812] [00002500] *pgd=00000000
[    3.817596] Internal error: Oops: 5 [#1] SMP ARM
[    3.822418] Modules linked in:
[    3.825653] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc6+ #21
[    3.832397] task: ed86ef40 ti: ed896000 task.ti: ed896000
[    3.838073] PC is at irq_notifier+0x234/0x25c
[    3.842651] LR is at irq_notifier+0x218/0x25c
[    3.847229] pc : [<c0029ed8>]    lr : [<c0029ebc>]    psr: 80000193
[    3.847229] sp : ed897ee8  ip : 00000005  fp : 00000001
[    3.859283] r10: c0b395f0  r9 : c0b30594  r8 : c0b8c2ac
[    3.864776] r7 : ffffffff  r6 : 00000000  r5 : 00000005  r4 : 00000000
[    3.871643] r3 : 00002500  r2 : 00000000  r1 : 00000005  r0 : 44302244
[    3.878479] Flags: Nzcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    3.886260] Control: 10c5387d  Table: 8000404a  DAC: 00000015
[    3.892272] Process swapper/1 (pid: 0, stack limit = 0xed896240)
[    3.898590] Stack: (0xed897ee8 to 0xed898000)
[    3.903167] 7ee0:                   c0979c3a 00000001 ed897ef8 ed896000 c0014f7c 00000000
[    3.911743] 7f00: 00000005 00000000 ffffffff c0b8c2ac c0b395f0 c077c04c c0c94b48 c0b3953c
[    3.920318] 7f20: c0bcd928 00000002 c0b39524 c00cfad8 00000000 ffffffff 00000000 c00cfb10
[    3.928924] 7f40: c14e62c0 c002c1c8 c002c0ac c14e62c0 00000002 e251c37d 00000000 c0b39548
[    3.937499] 7f60: c0b395f0 c05a1bc4 e251c37d 00000000 00000005 c05a3870 edc90380 edc90380
[    3.946105] 7f80: edc90394 c14e62c0 c0b39548 00000002 c0784064 c05a3c78 c0b395e0 c14e62c0
[    3.954681] 7fa0: 00000002 c0b39548 c0bc9db8 00000000 00000001 c05a1dc0 ed896000 00000015
[    3.963287] 7fc0: c0bc9db8 ed896000 8000406a c0b30594 c0784064 c000e504 00000746 c007a528
[    3.971862] 7fe0: 00000001 0000001d 600001d3 c0bcc004 00000000 800086c4 ee0aa6a7 d2aabaa9
[    3.980499] [<c0029ed8>] (irq_notifier+0x234/0x25c) from [<c077c04c>] (notifier_call_chain+0x38/0x68)
[    3.990173] [<c077c04c>] (notifier_call_chain+0x38/0x68) from [<c00cfad8>] (cpu_pm_notify+0x20/0x38)
[    3.999786] [<c00cfad8>] (cpu_pm_notify+0x20/0x38) from [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50)
[    4.009399] [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50) from [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c)
[    4.020111] [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c) from [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec)
[    4.030822] [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec) from [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240)
[    4.041870] [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240) from [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228)
[    4.052947] [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228) from [<c000e504>] (arch_cpu_idle+0x8/0x38)
[    4.062499] [<c000e504>] (arch_cpu_idle+0x8/0x38) from [<c007a528>] (cpu_startup_entry+0x178/0x1e4)
[    4.071990] [<c007a528>] (cpu_startup_entry+0x178/0x1e4) from [<800086c4>] (0x800086c4)
[    4.080383] Code: e5922288 03a03b0a 13a03c25 e0823003 (e5932000)
[    4.086791] ---[ end trace d83954a84a6fa69e ]---

It is supposed that sar_base is initialized in irq_save_context, which
is called on CPU_CLUSTER_PM_ENTER notification. If this notification
has been missed and CPU_CLUSTER_PM_EXIT is received sar_base is NULL.

Fix it by calling CPU_CLUSTER_PM_{ENTER,EXIT} under the same condition.

Signed-off-by: Vladimir Murzin <murzin.v@gmail.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>