linux.git/arch/arm, branch v2.6.22 Linux kernel source tree [ARM] always allow dump_stack() to produce a backtrace 2007-07-05T18:59:51+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2007-07-05T18:59:51+00:00 082f47a79bfc8a526b9a3e14a0ae9504fc09cc12 Don't make this dependent on CONFIG_DEBUG_KERNEL - if we hit a WARN_ON we need the stack trace to work out how we got to that point. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Don't make this dependent on CONFIG_DEBUG_KERNEL - if we hit a WARN_ON
we need the stack trace to work out how we got to that point.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[ARM] Fix non-page aligned boot time mappings 2007-07-04T20:16:33+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2007-07-04T20:16:33+00:00 7b9c7b4d07fd8981193a2c4ecb650566f42d1219 AT91SAM9260 stopped booting with the recent changes to MM initialisation - it was asking for a non-aligned virtual address which caused loops to be non-terminal. Fix this by rounding virtual addresses down, but remember to include the offset in the length, and round the length up to the following page. This means that asking for a mapping of 4K starting at 2K into a page maps two pages as one would expect. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
AT91SAM9260 stopped booting with the recent changes to MM
initialisation - it was asking for a non-aligned virtual address
which caused loops to be non-terminal.  Fix this by rounding
virtual addresses down, but remember to include the offset in
the length, and round the length up to the following page.

This means that asking for a mapping of 4K starting at 2K into
a page maps two pages as one would expect.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[ARM] 4458/1: pxa: Fix CKEN usage and hence fix pxa suspend/resume 2007-07-02T12:39:37+00:00 Richard Purdie rpurdie@rpsys.net 2007-07-02T09:19:07+00:00 1f750a782c0e9593a8d0981ea972f22334980955 The PXA CKEN changes broken syspend/resume on the pxa27x. This patch corrects the problem and fixes another couple of bad references. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
The PXA CKEN changes broken syspend/resume on the pxa27x. This patch
corrects the problem and fixes another couple of bad references.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[ARM] 4454/1: Use word accesses in Versatile PCI config reads 2007-07-02T12:39:35+00:00 Andrzej Zaborowski balrogg@gmail.com 2007-06-26T13:31:23+00:00 756813cac1d0172e1f93d977fe8bd1cd5086be21 ARM Versatile PCI config reads of one byte width have the lowest two bits of the address cleared and result in reading from a wrong place in the config space. This change is to use word size accesses like it is done for halfword reads. Byte reads are used for retrieving the IRQ number of a PCI device and the problem was not exposed until 2.6.20 because the value read was discarded in drivers/pci/setup-irq.c (recently fixed). Signed-off-by: Andrzej Zaborowski <andrew@openedhand.com> Acked-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
ARM Versatile PCI config reads of one byte width have the lowest two
bits of the address cleared and result in reading from a wrong place
in the config space.  This change is to use word size accesses like it is done for halfword reads.

Byte reads are used for retrieving the IRQ number of a PCI device and the problem was not exposed until 2.6.20 because the value read was discarded in drivers/pci/setup-irq.c (recently fixed).

Signed-off-by: Andrzej Zaborowski <andrew@openedhand.com>
Acked-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
PM: introduce set_target method in pm_ops 2007-07-01T19:29:44+00:00 Rafael J. Wysocki rjw@sisk.pl 2007-07-01T19:07:33+00:00 2391dae3e36c19fe668c71eac2eb8344dbaaf46d Commit 52ade9b3b97fd3bea42842a056fe0786c28d0555 changed the suspend code ordering to execute pm_ops->prepare() after the device model per-device .suspend() calls in order to fix some ACPI-related issues. Unfortunately, it broke the at91 platform which assumed that pm_ops->prepare() would be called before suspending devices. at91 used pm_ops->prepare() to get notified of the target system sleep state, so that it could use this information while suspending devices. However, with the current suspend code ordering pm_ops->prepare() is called too late for this purpose. Thus, at91 needs an additional method in 'struct pm_ops' that will be used for notifying the platform of the target system sleep state. Moreover, in the future such a method will also be needed by ACPI. This patch adds the .set_target() method to 'struct pm_ops' and makes the suspend code call it, if implemented, before executing the device model per-device .suspend() calls. It also modifies the at91 code to use pm_ops->set_target() instead of pm_ops->prepare(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Commit 52ade9b3b97fd3bea42842a056fe0786c28d0555 changed the suspend code
ordering to execute pm_ops->prepare() after the device model per-device
.suspend() calls in order to fix some ACPI-related issues.  Unfortunately, it
broke the at91 platform which assumed that pm_ops->prepare() would be called
before suspending devices.

at91 used pm_ops->prepare() to get notified of the target system sleep state,
so that it could use this information while suspending devices.  However, with
the current suspend code ordering pm_ops->prepare() is called too late for
this purpose.  Thus, at91 needs an additional method in 'struct pm_ops' that
will be used for notifying the platform of the target system sleep state.
Moreover, in the future such a method will also be needed by ACPI.

This patch adds the .set_target() method to 'struct pm_ops' and makes the
suspend code call it, if implemented, before executing the device model
per-device .suspend() calls.  It also modifies the at91 code to use
pm_ops->set_target() instead of pm_ops->prepare().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce fixed sys_sync_file_range2() syscall, implement on PowerPC and ARM 2007-06-28T18:38:30+00:00 David Woodhouse dwmw2@infradead.org 2007-06-27T21:10:09+00:00 edd5cd4a9424f22b0fa08bef5e299d41befd5622 Not all the world is an i386. Many architectures need 64-bit arguments to be aligned in suitable pairs of registers, and the original sys_sync_file_range(int, loff_t, loff_t, int) was therefore wasting an argument register for padding after the first integer. Since we don't normally have more than 6 arguments for system calls, that left no room for the final argument on some architectures. Fix this by introducing sys_sync_file_range2(int, int, loff_t, loff_t) which all fits nicely. In fact, ARM already had that, but called it sys_arm_sync_file_range. Move it to fs/sync.c and rename it, then implement the needed compatibility routine. And stop the missing syscall check from bitching about the absence of sys_sync_file_range() if we've implemented sys_sync_file_range2() instead. Tested on PPC32 and with 32-bit and 64-bit userspace on PPC64. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Not all the world is an i386.  Many architectures need 64-bit arguments to be
aligned in suitable pairs of registers, and the original
sys_sync_file_range(int, loff_t, loff_t, int) was therefore wasting an
argument register for padding after the first integer.  Since we don't
normally have more than 6 arguments for system calls, that left no room for
the final argument on some architectures.

Fix this by introducing sys_sync_file_range2(int, int, loff_t, loff_t) which
all fits nicely.  In fact, ARM already had that, but called it
sys_arm_sync_file_range.  Move it to fs/sync.c and rename it, then implement
the needed compatibility routine.  And stop the missing syscall check from
bitching about the absence of sys_sync_file_range() if we've implemented
sys_sync_file_range2() instead.

Tested on PPC32 and with 32-bit and 64-bit userspace on PPC64.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ARM] 4449/1: more entries in arch/arm/boot/.gitignore 2007-06-25T19:37:35+00:00 Nicolas Pitre nico@cam.org 2007-06-20T18:10:34+00:00 0c07f6115b779ae4597749d47dec228c6d2d1c7c Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[ARM] 4452/1: Force the literal pool dump before reloc_end 2007-06-25T19:36:27+00:00 Catalin Marinas catalin.marinas@arm.com 2007-06-22T13:27:50+00:00 92c83ff1ce6165bd62cebe4e4d1ca5ccb6f9713b In the arch/arm/boot/compressed/head.S file, the contents of the literal pool accumulated during the relocatable code must be dumped before reloc_end. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
In the arch/arm/boot/compressed/head.S file, the contents of the
literal pool accumulated during the relocatable code must be dumped
before reloc_end.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[ARM] Update show_regs/oops register format 2007-06-18T14:04:42+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2007-06-18T13:59:45+00:00 154c772ebfb12ef66855510e6be2b12c85110b0c Add the kernel release and version information to the output of show_regs/oops. Add the CPU PSR register. Avoid using printk to output partial lines; always output a complete line. Re-combine the "Control" and "Table + DAC" lines after nommu separated them; we don't want to waste vertical screen space needlessly. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Add the kernel release and version information to the output of
show_regs/oops.  Add the CPU PSR register.  Avoid using printk
to output partial lines; always output a complete line.

Re-combine the "Control" and "Table + DAC" lines after nommu
separated them; we don't want to waste vertical screen space
needlessly.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[ARM] Add support for pause_on_oops and display preempt/smp options 2007-06-17T12:40:39+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2007-06-17T12:38:27+00:00 d9202429e60d16d39c427cd4e4408cf1827ab9e9 Add calls to oops_enter() and oops_exit() to __die(), so that things like lockdep know when an oops occurs. Add suffixes to the oops report to indicate whether the running kernel has been built with preempt or smp support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Add calls to oops_enter() and oops_exit() to __die(), so that
things like lockdep know when an oops occurs.

Add suffixes to the oops report to indicate whether the running
kernel has been built with preempt or smp support.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>