linux.git/arch/arm, branch v2.6.18

[ARM] 3794/1: S3C24XX: do not defined set_irq_wake when no CONFIG_PM

2006-09-18T12:30:20+00:00

Patch from Ben Dooks

Do not define set_irq_wake as a real function if
the CONFIG_PM option is not set.

Fixes bug reported by Thomas Gleixner.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[ARM] 3780/1: Fix iop321 cpuid

2006-09-14T16:45:16+00:00

Patch from Dan Williams

commit a6a38a66224c7c578cfed2f584b440c81af0c3ae changed the iop321 id to a value that does not work with all platforms.  Change the mask to permit bit 11.  Tested on an iq80321 600Mhz CRB.

Signed-off-by: Dan Williams 
Signed-off-by: Russell King

[ARM] 3786/1: pnx4008: update defconfig

2006-09-14T12:32:08+00:00

Patch from Vitaly Wool

This patch updates the default configuration file for PNX4008.

 arch/arm/configs/pnx4008_defconfig |  715 +++++++------------------------------
 1 file changed, 154 insertions(+), 561 deletions(-)

Signed-off-by: Vitaly Wool 
Signed-off-by: Russell King

[ARM] 3785/1: S3C2412: Fix idle code as default uses wrong clocks

2006-09-14T12:29:15+00:00

Patch from Ben Dooks

Fix the idle code on the s3c2412 as the default
code is using bits in the CLKCON register that are
no-longer there.

Provide an override for the idle code, and ensure
that the power configuration is set to allow idle
instead of stop or sleep.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[ARM] 3784/1: S3C2413: fix config for MACH_S3C2413/MACH_SMDK2413

2006-09-14T12:29:13+00:00

Patch from Ben Dooks

These two machines are identical, and supported
by the SMDK2413 configuration. When MACH_SMDK2413
is selected, we must also select MACH_S3C2413
to allow machine_is_smdk2413() or machine_is_s3c2413()
to work.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[ARM] 3783/1: S3C2412: fix IRQ_EINT0 to IRQ_EINT3 handling

2006-09-09T20:24:13+00:00

Patch from Ben Dooks

The IRQ_EINT0 through IRQ_EINT3 handling has changed
on the S3C2412 from the previous SoCs in the range,
and thus we need to add code to handle this.

The changes come about due to these IRQs being
displayed in two different registers, and needing to
be acked and masked in both.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[ARM] 3775/1: S3C24XX: do not add same sysdev_driver to two classes

2006-09-09T18:44:50+00:00

Patch from Ben Dooks

The s3c244x-irq.c code makes the mistake of adding
the same drive to two different sys-classes. This
causes the class lists to become corrupted and the
suspend code to OOPS.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[ARM] 3774/1: S3C24XX: SMDK2413 has two machine IDs

2006-09-06T18:03:31+00:00

Patch from Ben Dooks

It turns out we have both SMDK2413 and S3C2413 for
the same board.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

[ARM] 3773/1: Add the HWCAP_VFP bit for the ARM926 CPUs

2006-09-06T18:03:28+00:00

Patch from Catalin Marinas

The ARM926EJ-S CPU has the VFP coprocessor and therefore it should be shown
in the /proc/cpuinfo if CONFIG_VFP is enabled.

Signed-off-by: Catalin Marinas 
Signed-off-by: Russell King

[ARM] 3772/1: Fix compilation error in mach-ixp4xx/nslu2*

2006-09-06T18:03:24+00:00

Patch from Martin Michlmayr

Include linux/irq.h in the nslu2 code in order to avoid the following
compiler error:

  CC      arch/arm/mach-ixp4xx/nslu2-power.o
arch/arm/mach-ixp4xx/nslu2-power.c: In function 'nslu2_power_init':
arch/arm/mach-ixp4xx/nslu2-power.c:53: warning: implicit declaration of function 'set_irq_type'
arch/arm/mach-ixp4xx/nslu2-power.c:53: error: 'IRQ_TYPE_LEVEL_LOW' undeclared (first use in this function)
arch/arm/mach-ixp4xx/nslu2-power.c:53: error: (Each undeclared identifier is reported only once
arch/arm/mach-ixp4xx/nslu2-power.c:53: error: for each function it appears in.)
arch/arm/mach-ixp4xx/nslu2-power.c:54: error: 'IRQ_TYPE_LEVEL_HIGH' undeclared (first use in this function)
make[5]: *** [arch/arm/mach-ixp4xx/nslu2-power.o] Error 1

Signed-off-by: Martin Michlmayr 
Signed-off-by: Russell King