Pull SoC fixes from Arnd Bergmann:
 "There are a few minor code fixes for tegra firmware, i.MX firmware
  and the eyeq reset controller, and a MAINTAINERS update as Alyssa
  Rosenzweig moves on to non-kernel projects.

  The other changes are all for devicetree files:

   - Multiple Marvell Armada SoCs need changes to fix PCIe, audio and
     SATA

   - A socfpga board fails to probe the ethernet phy

   - The two temperature sensors on i.MX8MP are swapped

   - Allwinner devicetree files cause build-time warnings

   - Two Rockchip based boards need corrections for headphone detection
     and SPI flash"

* tag 'soc-fixes-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: remove Alyssa Rosenzweig
  firmware: tegra: Do not warn on missing memory-region property
  arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
  arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
  arm64: dts: marvell: cn913x-solidrun: fix sata ports status
  ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
  arm64: dts: imx8mp: Correct thermal sensor index
  ARM: imx: Kconfig: Adjust select after renamed config option
  firmware: imx: Add stub functions for SCMI CPU API
  firmware: imx: Add stub functions for SCMI LMM API
  firmware: imx: Add stub functions for SCMI MISC API
  riscv: dts: allwinner: rename devterm i2c-gpio node to comply with binding
  arm64: dts: rockchip: Fix the headphone detection on the orangepi 5
  arm64: dts: rockchip: Add vcc supply for SPI Flash on NanoPC-T6
  ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address
  reset: eyeq: fix OF node leak
  ARM64: dts: mcbin: fix SATA ports on Macchiatobin
  ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370
  ARM: dts: allwinner: Minor whitespace cleanup

Another missing supply and a wrong headphone gpio level.

* tag 'v6.17-rockchip-dtsfixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Fix the headphone detection on the orangepi 5
  arm64: dts: rockchip: Add vcc supply for SPI Flash on NanoPC-T6

KVM/arm64 changes for 6.17, round #3

 - Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
   visiting from an MMU notifier

 - Fixes to the TLB match process and TLB invalidation range for
   managing the VCNR pseudo-TLB

 - Prevent SPE from erroneously profiling guests due to UNKNOWN reset
   values in PMSCR_EL1

 - Fix save/restore of host MDCR_EL2 to account for eagerly programming
   at vcpu_load() on VHE systems

 - Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios
   where an xarray's spinlock was nested with a *raw* spinlock

 - Permit stage-2 read permission aborts which are possible in the case
   of NV depending on the guest hypervisor's stage-2 translation

 - Call raw_spin_unlock() instead of the internal spinlock API

 - Fix parameter ordering when assigning VBAR_EL1

i.MX fixes for 6.17, round 2:

- Fix mach-imx Kconfig to select the correct PIT timer option
  (Lukas Bulwahn)
- Correct thermal sensor index for i.MX8MP device tree (Peng Fan)
- Fix i.MX SCMI build error by adding stub API functions (Peng Fan)

* tag 'imx-fixes-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mp: Correct thermal sensor index
  ARM: imx: Kconfig: Adjust select after renamed config option
  firmware: imx: Add stub functions for SCMI CPU API
  firmware: imx: Add stub functions for SCMI LMM API
  firmware: imx: Add stub functions for SCMI MISC API

Link: https://lore.kernel.org/r/aMQs2zr4fYl2DYVr@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu fixes for 6.17 (part 1)

Fix SATA ports on various boards: Macchiatobin, CN913x-solidrun.
Fix audio on Armada 370 DB and OpenRD.
Disable eMMC high-speed modes on the CN9132 CEX-7 module.
Disable runtime reconfiguration for PCIe lanes on the CN9132 CEX-7 module.

* tag 'mvebu-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
  arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
  arm64: dts: marvell: cn913x-solidrun: fix sata ports status
  ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
  ARM64: dts: mcbin: fix SATA ports on Macchiatobin
  ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370

Link: https://lore.kernel.org/r/87ikhnn1pl.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The mvebu-comphy driver does not currently know how to pass correct
lane-count to ATF while configuring the serdes lanes.

This causes the system to hard reset during reconfiguration, if a pci
card is present and has established a link during bootloader.

Remove the comphy handles from the respective pci nodes to avoid runtime
reconfiguration, relying solely on bootloader configuration - while
avoiding the hard reset.

When bootloader has configured the lanes correctly, the pci ports are
functional under Linux.

This issue may be addressed in the comphy driver at a future point.

Fixes: e9ff907f4076 ("arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Similar to MacchiatoBIN the high-speed modes are unstable on the CN9132
CEX-7 module, leading to failed transactions under normal use.

Disable all high-speed modes including UHS.

Additionally add no-sdio and non-removable properties as appropriate for
eMMC.

Fixes: e9ff907f4076 ("arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Commit "arm64: dts: marvell: only enable complete sata nodes" changed
armada-cp11x.dtsi disabling all sata ports status by default.

The author missed some dts which relied on the dtsi enabling all ports,
and just disabled unused ones instead.

Update dts for SolidRun cn913x based boards to enable the available
ports, rather than disabling the unvavailable one.

Further according to dt bindings the serdes phys are to be specified in
the port node, not the controller node.
Move those phys properties accordingly in clearfog base/pro/solidwan.

Fixes: 30023876aef4 ("arm64: dts: marvell: only enable complete sata nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Pull misc fixes from Andrew Morton:
 "20 hotfixes. 15 are cc:stable and the remainder address post-6.16
  issues or aren't considered necessary for -stable kernels. 14 of these
  fixes are for MM.

  This includes

   - kexec fixes from Breno for a recently introduced
     use-uninitialized bug

   - DAMON fixes from Quanmin Yan to avoid div-by-zero crashes
     which can occur if the operator uses poorly-chosen insmod
     parameters

   and misc singleton fixes"

* tag 'mm-hotfixes-stable-2025-09-10-20-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  MAINTAINERS: add tree entry to numa memblocks and emulation block
  mm/damon/sysfs: fix use-after-free in state_show()
  proc: fix type confusion in pde_set_flags()
  compiler-clang.h: define __SANITIZE_*__ macros only when undefined
  mm/vmalloc, mm/kasan: respect gfp mask in kasan_populate_vmalloc()
  ocfs2: fix recursive semaphore deadlock in fiemap call
  mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory
  mm/mremap: fix regression in vrm->new_addr check
  percpu: fix race on alloc failed warning limit
  mm/memory-failure: fix redundant updates for already poisoned pages
  s390: kexec: initialize kexec_buf struct
  riscv: kexec: initialize kexec_buf struct
  arm64: kexec: initialize kexec_buf struct in load_other_segments()
  mm/damon/reclaim: avoid divide-by-zero in damon_reclaim_apply_parameters()
  mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters()
  mm/damon/core: set quota->charged_from to jiffies at first charge window
  mm/hugetlb: add missing hugetlb_lock in __unmap_hugepage_range()
  init/main.c: fix boot time tracing crash
  mm/memory_hotplug: fix hwpoisoned large folio handling in do_migrate_range()
  mm/khugepaged: fix the address passed to notifier on testing young

The TMU has two temperature measurement sites located on the chip. The
probe 0 is located inside of the ANAMIX, while the probe 1 is located near
the ARM core. This has been confirmed by checking with HW design team and
checking RTL code.

So correct the {cpu,soc}-thermal sensor index.

Fixes: 30cdd62dce6b ("arm64: dts: imx8mp: Add thermal zones support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>