Stop printing a (ratelimited) kernel message for each instance of an unimplemented syscall being called. Userland making an unimplemented syscall is not necessarily misbehaviour and to be expected with a current userland running on an older kernel. Also, the current message looks scary to users but does not actually indicate a real problem nor help them narrow down the cause. Just rely on sys_ni_syscall() to return -ENOSYS. Cc: <stable@vger.kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael Weiser <michael.weiser@gmx.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
aarch64 unhandled signal kernel messages are very verbose, suggesting them to be more of a debugging aid: sigsegv[33]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x92000046, in sigsegv[400000+71000] CPU: 1 PID: 33 Comm: sigsegv Tainted: G W 4.15.0-rc3+ #3 Hardware name: linux,dummy-virt (DT) pstate: 60000000 (nZCv daif -PAN -UAO) pc : 0x4003f4 lr : 0x4006bc sp : 0000fffffe94a060 x29: 0000fffffe94a070 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 00000000004001b0 x23: 0000000000486ac8 x22: 00000000004001c8 x21: 0000000000000000 x20: 0000000000400be8 x19: 0000000000400b30 x18: 0000000000484728 x17: 000000000865ffc8 x16: 000000000000270f x15: 00000000000000b0 x14: 0000000000000002 x13: 0000000000000001 x12: 0000000000000000 x11: 0000000000000000 x10: 0008000020008008 x9 : 000000000000000f x8 : ffffffffffffffff x7 : 0004000000000000 x6 : ffffffffffffffff x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000004003e4 x2 : 0000fffffe94a1e8 x1 : 000000000000000a x0 : 0000000000000000 Disable them by default, so they can be enabled using /proc/sys/debug/exception-trace. Cc: <stable@vger.kernel.org> Signed-off-by: Michael Weiser <michael.weiser@gmx.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
Prior to v8.2, SError is an uncontainable fatal exception. The v8.2 RAS extensions use SError to notify software about RAS errors, these can be contained by the Error Syncronization Barrier. An ACPI system with firmware-first may use SError as its 'SEI' notification. Future patches may add code to 'claim' this SError as a notification. Other systems can distinguish these RAS errors from the SError ESR and use the AET bits and additional data from RAS-Error registers to handle the error. Future patches may add this kernel-first handling. Without support for either of these we will panic(), even if we received a corrected error. Add code to decode the severity of RAS errors. We can safely ignore contained errors where the CPU can continue to make progress. For all other errors we continue to panic(). Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull arm64 updates from Will Deacon:
"The big highlight is support for the Scalable Vector Extension (SVE)
which required extensive ABI work to ensure we don't break existing
applications by blowing away their signal stack with the rather large
new vector context (<= 2 kbit per vector register). There's further
work to be done optimising things like exception return, but the ABI
is solid now.
Much of the line count comes from some new PMU drivers we have, but
they're pretty self-contained and I suspect we'll have more of them in
future.
Plenty of acronym soup here:
- initial support for the Scalable Vector Extension (SVE)
- improved handling for SError interrupts (required to handle RAS
events)
- enable GCC support for 128-bit integer types
- remove kernel text addresses from backtraces and register dumps
- use of WFE to implement long delay()s
- ACPI IORT updates from Lorenzo Pieralisi
- perf PMU driver for the Statistical Profiling Extension (SPE)
- perf PMU driver for Hisilicon's system PMUs
- misc cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
arm64: Make ARMV8_DEPRECATED depend on SYSCTL
arm64: Implement __lshrti3 library function
arm64: support __int128 on gcc 5+
arm64/sve: Add documentation
arm64/sve: Detect SVE and activate runtime support
arm64/sve: KVM: Hide SVE from CPU features exposed to guests
arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
arm64/sve: KVM: Prevent guests from using SVE
arm64/sve: Add sysctl to set the default vector length for new processes
arm64/sve: Add prctl controls for userspace vector length management
arm64/sve: ptrace and ELF coredump support
arm64/sve: Preserve SVE registers around EFI runtime service calls
arm64/sve: Preserve SVE registers around kernel-mode NEON use
arm64/sve: Probe SVE capabilities and usable vector lengths
arm64: cpufeature: Move sys_caps_initialised declarations
arm64/sve: Backend logic for setting the vector length
arm64/sve: Signal handling support
arm64/sve: Support vector length resetting for new processes
arm64/sve: Core task context handling
arm64/sve: Low-level CPU setup
...
This patch adds the core support for switching and managing the SVE
architectural state of user tasks.
Calls to the existing FPSIMD low-level save/restore functions are
factored out as new functions task_fpsimd_{save,load}(), since SVE
now dynamically may or may not need to be handled at these points
depending on the kernel configuration, hardware features discovered
at boot, and the runtime state of the task. To make these
decisions as fast as possible, const cpucaps are used where
feasible, via the system_supports_sve() helper.
The SVE registers are only tracked for threads that have explicitly
used SVE, indicated by the new thread flag TIF_SVE. Otherwise, the
FPSIMD view of the architectural state is stored in
thread.fpsimd_state as usual.
When in use, the SVE registers are not stored directly in
thread_struct due to their potentially large and variable size.
Because the task_struct slab allocator must be configured very
early during kernel boot, it is also tricky to configure it
correctly to match the maximum vector length provided by the
hardware, since this depends on examining secondary CPUs as well as
the primary. Instead, a pointer sve_state in thread_struct points
to a dynamically allocated buffer containing the SVE register data,
and code is added to allocate and free this buffer at appropriate
times.
TIF_SVE is set when taking an SVE access trap from userspace, if
suitable hardware support has been detected. This enables SVE for
the thread: a subsequent return to userspace will disable the trap
accordingly. If such a trap is taken without sufficient system-
wide hardware support, SIGILL is sent to the thread instead as if
an undefined instruction had been executed: this may happen if
userspace tries to use SVE in a system where not all CPUs support
it for example.
The kernel will clear TIF_SVE and disable SVE for the thread
whenever an explicit syscall is made by userspace. For backwards
compatibility reasons and conformance with the spirit of the base
AArch64 procedure call standard, the subset of the SVE register
state that aliases the FPSIMD registers is still preserved across a
syscall even if this happens. The remainder of the SVE register
state logically becomes zero at syscall entry, though the actual
zeroing work is currently deferred until the thread next tries to
use SVE, causing another trap to the kernel. This implementation
is suboptimal: in the future, the fastpath case may be optimised
to zero the registers in-place and leave SVE enabled for the task,
where beneficial.
TIF_SVE is also cleared in the following slowpath cases, which are
taken as reasonable hints that the task may no longer use SVE:
* exec
* fork and clone
Code is added to sync data between thread.fpsimd_state and
thread.sve_state whenever enabling/disabling SVE, in a manner
consistent with the SVE architectural programmer's model.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Alex Bennée <alex.bennee@linaro.org>
[will: added #include to fix allnoconfig build]
[will: use enable_daif in do_sve_acc]
Signed-off-by: Will Deacon <will.deacon@arm.com>
The SVE architecture adds some system registers, ID register fields and a dedicated ESR exception class. This patch adds the appropriate definitions that will be needed by the kernel. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
It's possible for a user to deliberately trigger __dump_instr with a
chosen kernel address.
Let's avoid problems resulting from this by using get_user() rather than
__get_user(), ensuring that we don't erroneously access kernel memory.
Where we use __dump_instr() on kernel text, we already switch to
KERNEL_DS, so this shouldn't adversely affect those cases.
Fixes: 60ffc30d5652810d ("arm64: Exception handling")
Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Today SError is taken using the inv_entry macro that ends up in bad_mode. SError can be used by the RAS Extensions to notify either the OS or firmware of CPU problems, some of which may have been corrected. To allow this handling to be added, add a do_serror() C function that just panic()s. Add the entry.S boiler plate to save/restore the CPU registers and unmask debug exceptions. Future patches may change do_serror() to return if the SError Interrupt was notification of a corrected error. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Wang Xiongfeng <wangxiongfengi2@huawei.com> [Split out of a bigger patch, added compat path, renamed, enabled debug exceptions] Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
There are a few places where we want to mask all exceptions. Today we do this in a piecemeal fashion, typically we expect the caller to have masked irqs and the arch code masks debug exceptions, ignoring serror which is probably masked. Make it clear that 'mask all exceptions' is the intention by adding helpers to do exactly that. This will let us unmask SError without having to add 'oh and SError' to these paths. Signed-off-by: James Morse <james.morse@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Printing raw pointer values in backtraces has potential security implications and are of questionable value anyway. This patch follows x86's lead and removes the "Exception stack:" dump from kernel backtraces, as well as converting PC/LR values to symbols such as "sysrq_handle_crash+0x20/0x30". Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>