linux.git/arch/arm64/kernel/setup.c, branch v3.10 Linux kernel source tree arm64: Invoke the of_platform_populate() at arch_initcall() level 2013-05-14T14:44:46+00:00 Catalin Marinas catalin.marinas@arm.com 2013-05-14T09:51:18+00:00 c560ecfe9617c629ad09b07edb7523c87b2c9619 The of_platform_populate() is currently invoked at device_initcall() level. There are however drivers that use platform_driver_probe() directly and they need the devices to be populated. This patch makes the of_platform_populate() and arch_initcall(). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Benoit Lecardonnel <Benoit.Lecardonnel@synopsys.com> Tested-by: Benoit Lecardonnel <Benoit.Lecardonnel@synopsys.com> 
The of_platform_populate() is currently invoked at device_initcall()
level. There are however drivers that use platform_driver_probe()
directly and they need the devices to be populated. This patch makes the
of_platform_populate() and arch_initcall().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Benoit Lecardonnel <Benoit.Lecardonnel@synopsys.com>
Tested-by: Benoit Lecardonnel <Benoit.Lecardonnel@synopsys.com>
arm64: kernel: initialise cpu_logical_map from the DT 2013-03-20T17:26:24+00:00 Javi Merino javi.merino@arm.com 2012-08-29T08:47:19+00:00 4c7aa0021356ee91b96cea51b8b7fadebaba489e When booting the kernel, the cpu logical id map must be initialised using device tree data passed by FW or through an embedded blob. This patch parses the reg property in device tree "cpu" nodes, retrieves the corresponding CPUs hardware identifiers (MPIDR) and initialises the cpu logical map accordingly. The device tree HW identifiers are considered valid if all CPU nodes contain a "reg" property, there are no duplicate "reg" entries and the DT defines a CPU node whose "reg" property defines affinity levels that matches those of the boot CPU. The primary CPU is assigned cpu logical number 0 to keep the current convention valid. Based on a0ae02405076ac32bd17ece976e914b5b6075bb0 (ARM: kernel: add device tree init map function). Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
When booting the kernel, the cpu logical id map must be initialised
using device tree data passed by FW or through an embedded blob.

This patch parses the reg property in device tree "cpu" nodes,
retrieves the corresponding CPUs hardware identifiers (MPIDR) and
initialises the cpu logical map accordingly.

The device tree HW identifiers are considered valid if all CPU nodes
contain a "reg" property, there are no duplicate "reg" entries and the
DT defines a CPU node whose "reg" property defines affinity levels
that matches those of the boot CPU.

The primary CPU is assigned cpu logical number 0 to keep the current
convention valid.

Based on a0ae02405076ac32bd17ece976e914b5b6075bb0 (ARM: kernel: add
device tree init map function).

Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: Initialise the clocks described via DT 2013-03-20T16:46:43+00:00 Catalin Marinas catalin.marinas@arm.com 2013-02-08T12:18:15+00:00 de79a64d61ed3f7ccec9f9661fab2f3e97256243 This patch adds an arch_initcall() for the of_clk_init() clock initialisation. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
This patch adds an arch_initcall() for the of_clk_init() clock
initialisation.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: psci: add support for PSCI invocations from the kernel 2013-01-29T16:56:37+00:00 Will Deacon will.deacon@arm.com 2012-12-18T17:53:14+00:00 e790f1deb26a2e23f05dee0b9a5d4f764c3d7ea7 This patch adds support for the Power State Coordination Interface defined by ARM, allowing Linux to request CPU-centric power-management operations from firmware implementing the PSCI protocol. Signed-off-by: Will Deacon <will.deacon@arm.com> [Marc: s/u32/u64/ in the relevant spots, and switch from an initcall to an simpler init function] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
This patch adds support for the Power State Coordination Interface
defined by ARM, allowing Linux to request CPU-centric power-management
operations from firmware implementing the PSCI protocol.

Signed-off-by: Will Deacon <will.deacon@arm.com>
[Marc: s/u32/u64/ in the relevant spots, and switch from an initcall
 to an simpler init function]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: Populate the platform devices 2013-01-22T17:51:00+00:00 Catalin Marinas catalin.marinas@arm.com 2012-12-07T17:47:17+00:00 d6bafb9b821a3a5ddeb600a9fd015085760d818e This patch add a device_initcall() to populate the platform devices (of_default_bus_match_table). This allows SoC implementations that do not require earlier initcalls to avoid any platform-specific code under arch/arm64. GIC and generic timer initialisation is done via FDT and CPU notifiers independently of the SoC code. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> 
This patch add a device_initcall() to populate the platform devices
(of_default_bus_match_table). This allows SoC implementations that do
not require earlier initcalls to avoid any platform-specific code under
arch/arm64.

GIC and generic timer initialisation is done via FDT and CPU notifiers
independently of the SoC code.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
arm64: Ignore memory blocks below PHYS_OFFSET 2012-10-18T19:14:00+00:00 Catalin Marinas catalin.marinas@arm.com 2012-10-16T11:00:29+00:00 f71a1a42667f576ec736bb1200eba2118fee3a22 According to Documentation/arm64/booting.txt, the kernel image must be loaded at a pre-defined offset from the start of RAM so that the kernel can calculate PHYS_OFFSET based on this address. If the DT contains memory blocks below this PHYS_OFFSET, report them and ignore the corresponding memory range. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
According to Documentation/arm64/booting.txt, the kernel image must be
loaded at a pre-defined offset from the start of RAM so that the kernel
can calculate PHYS_OFFSET based on this address. If the DT contains
memory blocks below this PHYS_OFFSET, report them and ignore the
corresponding memory range.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: Kernel booting and initialisation 2012-09-17T09:24:45+00:00 Catalin Marinas catalin.marinas@arm.com 2012-03-05T11:49:27+00:00 9703d9d7f77ce129621f7d80a844822e2daa7008 The patch adds the kernel booting and the initial setup code. Documentation/arm64/booting.txt describes the booting protocol on the AArch64 Linux kernel. This is subject to change following the work on boot standardisation, ACPI. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> 
The patch adds the kernel booting and the initial setup code.
Documentation/arm64/booting.txt describes the booting protocol on the
AArch64 Linux kernel. This is subject to change following the work on
boot standardisation, ACPI.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>