Even non-KASLR kernels can be built as relocatable, to work around
broken bootloaders that violate the rules regarding physical placement
of the kernel image - in this case, the physical offset modulo 2 MiB is
used as the KASLR offset, and all absolute symbol references are fixed
up in the usual way. This workaround is enabled by default.

CONFIG_RELOCATABLE can also be disabled entirely, in which case the
relocation code and the code that captures the offset are omitted from
the build. However, since commit aacd149b6238 ("arm64: head: avoid
relocating the kernel twice for KASLR"), this code got out of sync, and
we still add the offset to the kernel virtual address before populating
the page tables even though we never capture it. This means we add a
bogus value instead, breaking the boot entirely.

Fixes: aacd149b6238 ("arm64: head: avoid relocating the kernel twice for KASLR")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/20220827070904.2216989-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

Since commit:

  a004393f45d9a55e ("arm64: idreg-override: use early FDT mapping in ID map")

Kernels built with KASAN_INLINE=y die early in boot before producing any
console output. This is because the accesses made to the FDT (e.g. in
generic string processing functions) are instrumented with KASAN, and
with KASAN_INLINE=y any access to an address in TTBR0 results in a bogus
shadow VA, resulting in a data abort.

This patch fixes this by reverting commits:

  7559d9f97581654f ("arm64: setup: drop early FDT pointer helpers")
  bd0c3fa21878b6d0 ("arm64: idreg-override: use early FDT mapping in ID map")

... and using the TTBR1 fixmap mapping of the FDT.

Note that due to a later commit:

  b65e411d6cc2f12a ("arm64: Save state of HCR_EL2.E2H before switch to EL1")

... which altered the prototype of init_feature_override() (and
invocation from head.S), commit bd0c3fa21878b6d0 does not revert
cleanly, and I've fixed that up manually.

Fixes: a004393f45d9 ("arm64: idreg-override: use early FDT mapping in ID map")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220713140949.45440-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

For CPUs that have the unfortunate mis-feature to be stuck in
VHE mode, we perform a funny dance where we completely shortcut
the normal boot process to enable VHE and run the kernel at EL2,
and only then start booting the kernel.

Not only this is pretty ugly, but it means that the EL2 finalisation
occurs before we have processed the sysreg override.

Instead, start executing the kernel as if it was an EL1 guest and
rely on the normal EL2 finalisation to go back to EL2.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-4-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

As we're about to switch the way E2H-stuck CPUs boot, save
the boot CPU E2H state as a flag tied to the boot mode
that can then be checked by the idreg override code.

This allows us to replace the is_kernel_in_hyp_mode() check
with a simple comparison with this state, even when running
at EL1. Note that this flag isn't saved in __boot_cpu_mode,
and is only kept in a register in the assembly code.

Use with caution.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

as we are about to perform a lot more in 'mutate_to_vhe' than
we currently do, this function really becomes the point where
we finalise the basic EL2 configuration.

Reflect this into the code by renaming a bunch of things:
- HVC_VHE_RESTART -> HVC_FINALISE_EL2
- switch_to_vhe --> finalise_el2
- mutate_to_vhe -> __finalise_el2

No functional changes.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-2-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

Joey reports that booting 52-bit VA capable builds on 52-bit VA capable
CPUs is broken since commit 0d9b1ffefabe ("arm64: mm: make vabits_actual
a build time constant if possible"). This is due to the fact that the
primary CPU reads the vabits_actual variable before it has been
assigned.

The reason for deferring the assignment of vabits_actual was that we try
to perform as few stores to memory as we can with the MMU and caches
off, due to the cache coherency issues it creates.

Since __cpu_setup() [which is where the read of vabits_actual occurs] is
also called on the secondary boot path, we cannot just read the CPU ID
registers directly, given that the size of the VA space is decided by
the capabilities of the primary CPU. So let's read vabits_actual only on
the secondary boot path, and read the CPU ID registers directly on the
primary boot path, by making it a function parameter of __cpu_setup().

To ensure that all users of vabits_actual (including kasan_early_init())
observe the correct value, move the assignment of vabits_actual back
into asm code, but still defer it to after the MMU and caches have been
enabled.

Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 0d9b1ffefabe ("arm64: mm: make vabits_actual a build time constant if possible")
Reported-by: Joey Gouly <joey.gouly@arm.com>
Co-developed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220701111045.2944309-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

It's very easy to confuse __PHYS_OFFSET and PHYS_OFFSET. To clarify
things, let's remove __PHYS_OFFSET and use KERNEL_START directly, with
comments to show that we're using physical address, as we do for other
objects.

At the same time, update the comment regarding the kernel entry address
to mention __pa(KERNEL_START) rather than __pa(PAGE_OFFSET).

There should be no functional change as a result of this patch.

Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220629041207.1670133-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>

We no longer need to call into the kernel to map the FDT before calling
into the kernel so let's drop the helpers we added for this.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-22-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

Currently, when KASLR is in effect, we set up the kernel virtual address
space twice: the first time, the KASLR seed is looked up in the device
tree, and the kernel virtual mapping is torn down and recreated again,
after which the relocations are applied a second time. The latter step
means that statically initialized global pointer variables will be reset
to their initial values, and to ensure that BSS variables are not set to
values based on the initial translation, they are cleared again as well.

All of this is needed because we need the command line (taken from the
DT) to tell us whether or not to randomize the virtual address space
before entering the kernel proper. However, this code has expanded
little by little and now creates global state unrelated to the virtual
randomization of the kernel before the mapping is torn down and set up
again, and the BSS cleared for a second time. This has created some
issues in the past, and it would be better to avoid this little dance if
possible.

So instead, let's use the temporary mapping of the device tree, and
execute the bare minimum of code to decide whether or not KASLR should
be enabled, and what the seed is. Only then, create the virtual kernel
mapping, clear BSS, etc and proceed as normal.  This avoids the issues
around inconsistent global state due to BSS being cleared twice, and is
generally more maintainable, as it permits us to defer all the remaining
DT parsing and KASLR initialization to a later time.

This means the relocation fixup code runs only a single time as well,
allowing us to simplify the RELR handling code too, which is not
idempotent and was therefore required to keep track of the offset that
was applied the first time around.

Note that this means we have to clone a pair of FDT library objects, so
that we can control how they are built - we need the stack protector
and other instrumentation disabled so that the code can tolerate being
called this early. Note that only the kernel page tables and the
temporary stack are mapped read-write at this point, which ensures that
the early code does not modify any global state inadvertently.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-21-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

In order to avoid having to touch memory with the MMU and caches
disabled, and therefore having to invalidate it from the caches
explicitly, just defer storing the value until after the MMU has been
turned on, unless we are giving up with an error.

While at it, move the associated variable definitions into C code.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-19-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>