linux.git/arch/arm64/kernel/head.S, branch v3.10 Linux kernel source tree arm64: head: match all affinity levels in the pen of the secondaries 2013-03-20T18:09:42+00:00 Javi Merino javi.merino@arm.com 2012-08-29T17:32:18+00:00 0359b0e2d0bbd28289c38ebe779b5f1c61f8ccc8 The reg property of the cpu nodes in the DT now contains all the affinity levels in (MPIDR[39:32] and MPIDR[23:0]) and that's what boot_secondary() writes in the pen, so increase the mask in secondary_holding_pen accordingly. Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
The reg property of the cpu nodes in the DT now contains all the
affinity levels in (MPIDR[39:32] and MPIDR[23:0]) and that's what
boot_secondary() writes in the pen, so increase the mask in
secondary_holding_pen accordingly.

Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: Add simple earlyprintk support 2013-01-22T17:51:01+00:00 Catalin Marinas catalin.marinas@arm.com 2012-10-23T13:55:08+00:00 2475ff9d2c6ea3bbfed55c4635426c371f9ad327 This patch adds support for "earlyprintk=" parameter on the kernel command line. The format is: earlyprintk=<name>[,<addr>][,<options>] where <name> is the name of the (UART) device, e.g. "pl011", <addr> is the I/O address. The <options> aren't currently used. The mapping of the earlyprintk device is done very early during kernel boot and there are restrictions on which functions it can call. A special early_io_map() function is added which creates the mapping from the pre-defined EARLY_IOBASE to the device I/O address passed via the kernel parameter. The pgd entry corresponding to EARLY_IOBASE is pre-populated in head.S during kernel boot. Only PL011 is currently supported and it is assumed that the interface is already initialised by the boot loader before the kernel is started. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> 
This patch adds support for "earlyprintk=" parameter on the kernel
command line. The format is:

  earlyprintk=<name>[,<addr>][,<options>]

where <name> is the name of the (UART) device, e.g. "pl011", <addr> is
the I/O address. The <options> aren't currently used.

The mapping of the earlyprintk device is done very early during kernel
boot and there are restrictions on which functions it can call. A
special early_io_map() function is added which creates the mapping from
the pre-defined EARLY_IOBASE to the device I/O address passed via the
kernel parameter. The pgd entry corresponding to EARLY_IOBASE is
pre-populated in head.S during kernel boot.

Only PL011 is currently supported and it is assumed that the interface
is already initialised by the boot loader before the kernel is started.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
arm64: hyp: initialize vttbr_el2 to zero 2012-12-05T11:26:50+00:00 Marc Zyngier marc.zyngier@arm.com 2012-11-06T19:27:59+00:00 7dbfbe5b2f5fc01fb0a19a0d58820ba4ebb07884 The architecture doesn't mandate any reset value for vttbr_el2. Better set it to a known value before some HYP code gets confused. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
The architecture doesn't mandate any reset value for vttbr_el2.
Better set it to a known value before some HYP code gets confused.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: add hypervisor stub 2012-12-05T11:26:49+00:00 Marc Zyngier marc.zyngier@arm.com 2012-10-19T16:46:27+00:00 712c6ff4dba4917a440be601dc312506322bffe8 If booted in EL2, install an dummy hypervisor whose only purpose is to be replaced by a full fledged one. A minimal API allows to: - obtain the current HYP vectors (__hyp_get_vectors) - set new HYP vectors (__hyp_set_vectors) Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
If booted in EL2, install an dummy hypervisor whose only purpose
is to be replaced by a full fledged one.

A minimal API allows to:
- obtain the current HYP vectors (__hyp_get_vectors)
- set new HYP vectors (__hyp_set_vectors)

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: record boot mode when entering the kernel 2012-12-05T11:26:48+00:00 Marc Zyngier marc.zyngier@arm.com 2012-10-26T14:40:05+00:00 f35a92053b45cf8154db5558ede3ba5245c9dc7e To be able to signal the availability of EL2 to other parts of the kernel, record the boot mode. Once booted, two predicates indicate if HYP mode is available, and if not, whether this is due to a boot mode mismatch or not. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
To be able to signal the availability of EL2 to other parts of
the kernel, record the boot mode.

Once booted, two predicates indicate if HYP mode is available,
and if not, whether this is due to a boot mode mismatch or not.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: generic timer: use virtual counter instead of physical at EL0 2012-12-05T11:20:04+00:00 Will Deacon will.deacon@arm.com 2012-11-29T22:48:31+00:00 1f75ff0a3d63606c1345e316e88a903fd43ca8be We want to use the virtual counter at EL0, as the physical counter may not track the current clocksource for guests running under a hypervisor. This patch updates the vdso and generic timer driver to use the virtual counter. The kernel EL2 entry code is also updated to ensure that the virtual offset is initialised to zero. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
We want to use the virtual counter at EL0, as the physical counter
may not track the current clocksource for guests running under a
hypervisor.

This patch updates the vdso and generic timer driver to use the virtual
counter. The kernel EL2 entry code is also updated to ensure that the
virtual offset is initialised to zero.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: Kernel booting and initialisation 2012-09-17T09:24:45+00:00 Catalin Marinas catalin.marinas@arm.com 2012-03-05T11:49:27+00:00 9703d9d7f77ce129621f7d80a844822e2daa7008 The patch adds the kernel booting and the initial setup code. Documentation/arm64/booting.txt describes the booting protocol on the AArch64 Linux kernel. This is subject to change following the work on boot standardisation, ACPI. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> 
The patch adds the kernel booting and the initial setup code.
Documentation/arm64/booting.txt describes the booting protocol on the
AArch64 Linux kernel. This is subject to change following the work on
boot standardisation, ACPI.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>