Pull non-mm updates from Andrew Morton:

 - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
   directories

 - Douglas Anderson has added a new "buddy" mode to the hardlockup
   detector. It permits the detector to work on architectures which
   cannot provide the required interrupts, by having CPUs periodically
   perform checks on other CPUs

 - Zhen Lei has enhanced kexec's ability to support two crash regions

 - Petr Mladek has done a lot of cleanup on the hard lockup detector's
   Kconfig entries

 - And the usual bunch of singleton patches in various places

* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
  kernel/time/posix-stubs.c: remove duplicated include
  ocfs2: remove redundant assignment to variable bit_off
  watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
  powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
  devres: show which resource was invalid in __devm_ioremap_resource()
  watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
  watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
  watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
  watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
  watchdog/hardlockup: make the config checks more straightforward
  watchdog/hardlockup: sort hardlockup detector related config values a logical way
  watchdog/hardlockup: move SMP barriers from common code to buddy code
  watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
  watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
  watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
  watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
  watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
  watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
  watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
  watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
  ...

Set safe maximum CPU frequency to 5 GHz in case a particular platform
doesn't implement cpufreq driver.  Although, architecture doesn't put any
restrictions on maximum frequency but 5 GHz seems to be safe maximum given
the available Arm CPUs in the market which are clocked much less than 5
GHz.

On the other hand, we can't make it much higher as it would lead to a
large hard-lockup detection timeout on parts which are running slower (eg.
1GHz on Developerbox) and doesn't possess a cpufreq driver.

Link: https://lkml.kernel.org/r/20230519101840.v5.17.Ia9d02578e89c3f44d3cb12eec8b0176603c8ab2f@changeid
Co-developed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Co-developed-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Contemporary kernels and modules can be relatively large, especially
when common debug options are enabled. Using GCC 12.1.0, a v6.3-rc7
defconfig kernel is ~38M, and with PROVE_LOCKING + KASAN_INLINE enabled
this expands to ~117M. Shanker reports [1] that the NVIDIA GPU driver
alone can consume 110M of module space in some configurations.

Both KASLR and ARM64_ERRATUM_843419 select MODULE_PLTS, so anyone
wanting a kernel to have KASLR or run on Cortex-A53 will have
MODULE_PLTS selected. This is the case in defconfig and distribution
kernels (e.g. Debian, Android, etc).

Practically speaking, this means we're very likely to need MODULE_PLTS
and while it's almost guaranteed that MODULE_PLTS will be selected, it
is possible to disable support, and we have to maintain some awkward
special cases for such unusual configurations.

This patch removes the MODULE_PLTS config option, with the support code
always enabled if MODULES is selected. This results in a slight
simplification, and will allow for further improvement in subsequent
patches.

For any config which currently selects MODULE_PLTS, there will be no
functional change as a result of this patch.

[1] https://lore.kernel.org/linux-arm-kernel/159ceeab-09af-3174-5058-445bc8dcf85b@nvidia.com/

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Shanker Donthineni <sdonthineni@nvidia.com>
Cc: Will Deacon <will@kernel.org>
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com>
Link: https://lore.kernel.org/r/20230530110328.2213762-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Having the ARM PMUv3 driver sitting in arch/arm64/kernel is getting
in the way of being able to use perf on ARMv8 cores running a 32bit
kernel, such as 32bit KVM guests.

This patch moves it into drivers/perf/arm_pmuv3.c, with an include
file in include/linux/perf/arm_pmuv3.h. The only thing left in
arch/arm64 is some mundane perf stuff.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Zaid Al-Bassam <zalbassam@google.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230317195027.3746949-2-zalbassam@google.com
Signed-off-by: Will Deacon <will@kernel.org>

Pull EFI updates from Ard Biesheuvel:
 "Another fairly sizable pull request, by EFI subsystem standards.

  Most of the work was done by me, some of it in collaboration with the
  distro and bootloader folks (GRUB, systemd-boot), where the main focus
  has been on removing pointless per-arch differences in the way EFI
  boots a Linux kernel.

   - Refactor the zboot code so that it incorporates all the EFI stub
     logic, rather than calling the decompressed kernel as a EFI app.

   - Add support for initrd= command line option to x86 mixed mode.

   - Allow initrd= to be used with arbitrary EFI accessible file systems
     instead of just the one the kernel itself was loaded from.

   - Move some x86-only handling and manipulation of the EFI memory map
     into arch/x86, as it is not used anywhere else.

   - More flexible handling of any random seeds provided by the boot
     environment (i.e., systemd-boot) so that it becomes available much
     earlier during the boot.

   - Allow improved arch-agnostic EFI support in loaders, by setting a
     uniform baseline of supported features, and adding a generic magic
     number to the DOS/PE header. This should allow loaders such as GRUB
     or systemd-boot to reduce the amount of arch-specific handling
     substantially.

   - (arm64) Run EFI runtime services from a dedicated stack, and use it
     to recover from synchronous exceptions that might occur in the
     firmware code.

   - (arm64) Ensure that we don't allocate memory outside of the 48-bit
     addressable physical range.

   - Make EFI pstore record size configurable

   - Add support for decoding CXL specific CPER records"

* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
  arm64: efi: Recover from synchronous exceptions occurring in firmware
  arm64: efi: Execute runtime services from a dedicated stack
  arm64: efi: Limit allocations to 48-bit addressable physical region
  efi: Put Linux specific magic number in the DOS header
  efi: libstub: Always enable initrd command line loader and bump version
  efi: stub: use random seed from EFI variable
  efi: vars: prohibit reading random seed variables
  efi: random: combine bootloader provided RNG seed with RNG protocol output
  efi/cper, cxl: Decode CXL Error Log
  efi/cper, cxl: Decode CXL Protocol Error Section
  efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
  efi: x86: Move EFI runtime map sysfs code to arch/x86
  efi: runtime-maps: Clarify purpose and enable by default for kexec
  efi: pstore: Add module parameter for setting the record size
  efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
  efi: memmap: Move manipulation routines into x86 arch tree
  efi: memmap: Move EFI fake memmap support into x86 arch tree
  efi: libstub: Undeprecate the command line initrd loader
  efi: libstub: Add mixed mode support to command line initrd loader
  efi: libstub: Permit mixed mode return types other than efi_status_t
  ...

Implement dynamic shadow call stack support on Clang, by parsing the
unwind tables at init time to locate all occurrences of PACIASP/AUTIASP
instructions, and replacing them with the shadow call stack push and pop
instructions, respectively.

This is useful because the overhead of the shadow call stack is
difficult to justify on hardware that implements pointer authentication
(PAC), and given that the PAC instructions are executed as NOPs on
hardware that doesn't, we can just replace them without breaking
anything. As PACIASP/AUTIASP are guaranteed to be paired with respect to
manipulations of the return address, replacing them 1:1 with shadow call
stack pushes and pops is guaranteed to result in the desired behavior.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20221027155908.1940624-4-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>

We will be sharing efi-entry.S with the zboot decompressor build, which
does not link against vmlinux directly. So move it into the libstub
source directory so we can include in the libstub static library.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

Pull Kbuild updates from Masahiro Yamada:

 - Remove potentially incomplete targets when Kbuid is interrupted by
   SIGINT etc in case GNU Make may miss to do that when stderr is piped
   to another program.

 - Rewrite the single target build so it works more correctly.

 - Fix rpm-pkg builds with V=1.

 - List top-level subdirectories in ./Kbuild.

 - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
   kallsyms.

 - Avoid two different modules in lib/zstd/ having shared code, which
   potentially causes building the common code as build-in and modular
   back-and-forth.

 - Unify two modpost invocations to optimize the build process.

 - Remove head-y syntax in favor of linker scripts for placing
   particular sections in the head of vmlinux.

 - Bump the minimal GNU Make version to 3.82.

 - Clean up misc Makefiles and scripts.

* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
  docs: bump minimal GNU Make version to 3.82
  ia64: simplify esi object addition in Makefile
  Revert "kbuild: Check if linker supports the -X option"
  kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
  kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
  zstd: Fixing mixed module-builtin objects
  kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
  kallsyms: take the input file instead of reading stdin
  kallsyms: drop duplicated ignore patterns from kallsyms.c
  kbuild: reuse mksysmap output for kallsyms
  mksysmap: update comment about __crc_*
  kbuild: remove head-y syntax
  kbuild: use obj-y instead extra-y for objects placed at the head
  kbuild: hide error checker logs for V=1 builds
  kbuild: re-run modpost when it is updated
  kbuild: unify two modpost invocations
  kbuild: move vmlinux.o rule to the top Makefile
  kbuild: move .vmlinux.objs rule to Makefile.modpost
  kbuild: list sub-directories in ./Kbuild
  Makefile.compiler: replace cc-ifversion with compiler-specific macros
  ...

The objects placed at the head of vmlinux need special treatments:

 - arch/$(SRCARCH)/Makefile adds them to head-y in order to place
   them before other archives in the linker command line.

 - arch/$(SRCARCH)/kernel/Makefile adds them to extra-y instead of
   obj-y to avoid them going into built-in.a.

This commit gets rid of the latter.

Create vmlinux.a to collect all the objects that are unconditionally
linked to vmlinux. The objects listed in head-y are moved to the head
of vmlinux.a by using 'ar m'.

With this, arch/$(SRCARCH)/kernel/Makefile can consistently use obj-y
for builtin objects.

There is no *.o that is directly linked to vmlinux. Drop unneeded code
in scripts/clang-tools/gen_compile_commands.py.

$(AR) mPi needs 'T' to workaround the llvm-ar bug. The fix was suggested
by Nathan Chancellor [1].

[1]: https://lore.kernel.org/llvm/YyjjT5gQ2hGMH0ni@dev-arch.thelio-3990X/

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>

The 32-bit ARM kernel implements fixups on behalf of user space when
using LDM/STM or LDRD/STRD instructions on addresses that are not 32-bit
aligned. This is not something that is supported by the architecture,
but was done anyway to increase compatibility with user space software,
which mostly targeted x86 at the time and did not care about aligned
accesses.

This feature is one of the remaining impediments to being able to switch
to 64-bit kernels on 64-bit capable hardware running 32-bit user space,
so let's implement it for the arm64 compat layer as well.

Note that the intent is to implement the exact same handling of
misaligned multi-word loads and stores as the 32-bit kernel does,
including what appears to be missing support for user space programs
that rely on SETEND to switch to a different byte order and back. Also,
like the 32-bit ARM version, we rely on the faulting address reported by
the CPU to infer the memory address, instead of decoding the instruction
fully to obtain this information.

This implementation is taken from the 32-bit ARM tree, with all pieces
removed that deal with instructions other than LDRD/STRD and LDM/STM, or
that deal with alignment exceptions taken in kernel mode.

Cc: debian-arm@lists.debian.org
Cc: Vagrant Cascadian <vagrant@debian.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Steve McIntyre <steve@einval.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220701135322.3025321-1-ardb@kernel.org
[catalin.marinas@arm.com: change the option to 'default n']
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>