linux.git/arch/arm64/include, branch v4.18 Linux kernel source tree mm: do not initialize TLB stack vma's with vma_init() 2018-08-01T20:43:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-08-01T20:43:38+00:00 8b11ec1b5ffb54f71cb5a5e5c8c4d36e5d113085 Commit 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") tried to initialize various left-over ad-hoc vma's "properly", but actually made things worse for the temporary vma's used for TLB flushing. vma_init() doesn't actually initialize all of the vma, just a few fields, so doing something like - struct vm_area_struct vma = { .vm_mm = tlb->mm, }; + struct vm_area_struct vma; + + vma_init(&vma, tlb->mm); was actually very bad: instead of having a nicely initialized vma with every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma with only a couple of fields initialized. And they weren't even fields that the code in question mostly cared about. The flush_tlb_range() function takes a "struct vma" rather than a "struct mm_struct", because a few architectures actually care about what kind of range it is - being able to only do an ITLB flush if it's a range that doesn't have data accesses enabled, for example. And all the normal users already have the vma for doing the range invalidation. But a few people want to call flush_tlb_range() with a range they just made up, so they also end up using a made-up vma. x86 just has a special "flush_tlb_mm_range()" function for this, but other architectures (arm and ia64) do the "use fake vma" thing instead, and thus got caught up in the vma_init() changes. At the same time, the TLB flushing code really doesn't care about most other fields in the vma, so vma_init() is just unnecessary and pointless. This fixes things by having an explicit "this is just an initializer for the TLB flush" initializer macro, which is used by the arm/arm64/ia64 people who mis-use this interface with just a dummy vma. Fixes: 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Commit 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and
data segments") tried to initialize various left-over ad-hoc vma's
"properly", but actually made things worse for the temporary vma's used
for TLB flushing.

vma_init() doesn't actually initialize all of the vma, just a few
fields, so doing something like

   -       struct vm_area_struct vma = { .vm_mm = tlb->mm, };
   +       struct vm_area_struct vma;
   +
   +       vma_init(&vma, tlb->mm);

was actually very bad: instead of having a nicely initialized vma with
every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma
with only a couple of fields initialized.  And they weren't even fields
that the code in question mostly cared about.

The flush_tlb_range() function takes a "struct vma" rather than a
"struct mm_struct", because a few architectures actually care about what
kind of range it is - being able to only do an ITLB flush if it's a
range that doesn't have data accesses enabled, for example.  And all the
normal users already have the vma for doing the range invalidation.

But a few people want to call flush_tlb_range() with a range they just
made up, so they also end up using a made-up vma.  x86 just has a
special "flush_tlb_mm_range()" function for this, but other
architectures (arm and ia64) do the "use fake vma" thing instead, and
thus got caught up in the vma_init() changes.

At the same time, the TLB flushing code really doesn't care about most
other fields in the vma, so vma_init() is just unnecessary and
pointless.

This fixes things by having an explicit "this is just an initializer for
the TLB flush" initializer macro, which is used by the arm/arm64/ia64
people who mis-use this interface with just a dummy vma.

Fixes: 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments")
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: use vma_init() to initialize VMAs on stack and data segments 2018-07-27T02:38:03+00:00 Kirill A. Shutemov kirill.shutemov@linux.intel.com 2018-07-26T23:37:30+00:00 2c4541e24c55e2847bede93e33d749280edd429a Make sure to initialize all VMAs properly, not only those which come from vm_area_cachep. Link: http://lkml.kernel.org/r/20180724121139.62570-3-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Make sure to initialize all VMAs properly, not only those which come
from vm_area_cachep.

Link: http://lkml.kernel.org/r/20180724121139.62570-3-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm64: neon: Fix function may_use_simd() return error status 2018-07-11T16:02:02+00:00 Yandong Zhao yandong77520@gmail.com 2018-07-11T11:06:28+00:00 2fd8eb4ad87104c54800ef3cea498c92eb15c78a It does not matter if the caller of may_use_simd() migrates to another cpu after the call, but it is still important that the kernel_neon_busy percpu instance that is read matches the cpu the task is running on at the time of the read. This means that raw_cpu_read() is not sufficient. kernel_neon_busy may appear true if the caller migrates during the execution of raw_cpu_read() and the next task to be scheduled in on the initial cpu calls kernel_neon_begin(). This patch replaces raw_cpu_read() with this_cpu_read() to protect against this race. Cc: <stable@vger.kernel.org> Fixes: cb84d11e1625 ("arm64: neon: Remove support for nested or hardirq kernel-mode NEON") Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Yandong Zhao <yandong77520@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> 
It does not matter if the caller of may_use_simd() migrates to
another cpu after the call, but it is still important that the
kernel_neon_busy percpu instance that is read matches the cpu the
task is running on at the time of the read.

This means that raw_cpu_read() is not sufficient.  kernel_neon_busy
may appear true if the caller migrates during the execution of
raw_cpu_read() and the next task to be scheduled in on the initial
cpu calls kernel_neon_begin().

This patch replaces raw_cpu_read() with this_cpu_read() to protect
against this race.

Cc: <stable@vger.kernel.org>
Fixes: cb84d11e1625 ("arm64: neon: Remove support for nested or hardirq kernel-mode NEON")
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yandong Zhao <yandong77520@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
arm64: Remove unnecessary ISBs from set_{pte,pmd,pud} 2018-06-27T17:26:20+00:00 Will Deacon will.deacon@arm.com 2018-06-22T08:31:16+00:00 24fe1b0efad4fcdd32ce46cffeab297f22581707 Commit 7f0b1bf04511 ("arm64: Fix barriers used for page table modifications") fixed a reported issue with fixmap page-table entries not being visible to the walker due to a missing DSB instruction. At the same time, it added ISB instructions to the arm64 set_{pte,pmd,pud} functions, which are not required by the architecture and make little sense in isolation. Remove the redundant ISBs. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
Commit 7f0b1bf04511 ("arm64: Fix barriers used for page table modifications")
fixed a reported issue with fixmap page-table entries not being visible
to the walker due to a missing DSB instruction. At the same time, it added
ISB instructions to the arm64 set_{pte,pmd,pud} functions, which are not
required by the architecture and make little sense in isolation.

Remove the redundant ISBs.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: Avoid flush_icache_range() in alternatives patching code 2018-06-27T17:21:53+00:00 Will Deacon will.deacon@arm.com 2018-06-22T08:31:15+00:00 429388682dc266e7a693f9c27e3aabd341d55343 The implementation of flush_icache_range() includes instruction sequences which are themselves patched at runtime, so it is not safe to call from the patching framework. This patch reworks the alternatives cache-flushing code so that it rolls its own internal D-cache maintenance using DC CIVAC before invalidating the entire I-cache after all alternatives have been applied at boot. Modules don't cause any issues, since flush_icache_range() is safe to call by the time they are loaded. Acked-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Rohit Khanna <rokhanna@nvidia.com> Cc: Alexander Van Brunt <avanbrunt@nvidia.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 
The implementation of flush_icache_range() includes instruction sequences
which are themselves patched at runtime, so it is not safe to call from
the patching framework.

This patch reworks the alternatives cache-flushing code so that it rolls
its own internal D-cache maintenance using DC CIVAC before invalidating
the entire I-cache after all alternatives have been applied at boot.
Modules don't cause any issues, since flush_icache_range() is safe to
call by the time they are loaded.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Rohit Khanna <rokhanna@nvidia.com>
Cc: Alexander Van Brunt <avanbrunt@nvidia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
KVM: arm64/sve: Fix SVE trap restoration for non-current tasks 2018-06-21T08:14:44+00:00 Dave Martin Dave.Martin@arm.com 2018-06-15T15:47:25+00:00 b3eb56b629d1095dde56fa37f4d7bcd5f783c8b2 Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") attempts to restore the configuration of userspace SVE trapping via a call to fpsimd_bind_task_to_cpu(), but the logic for determining when to do this is not correct. The patch makes the errnoenous assumption that the only task that may try to enter userspace with the currently loaded FPSIMD/SVE register content is current. This may not be the case however: if some other user task T is scheduled on the CPU during the execution of the KVM run loop, and the vcpu does not try to use the registers in the meantime, then T's state may be left there intact. If T happens to be the next task to enter userspace on this CPU then the hooks for reloading the register state and configuring traps will be skipped. (Also, current never has SVE state at this point anyway and should always have the trap enabled, as a side-effect of the ioctl() syscall needed to reach the KVM run loop in the first place.) This patch instead restores the state of the EL0 trap from the state observed at the most recent vcpu_load(), ensuring that the trap is set correctly for the loaded context (if any). Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 
Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce
guest/host thrashing") attempts to restore the configuration of
userspace SVE trapping via a call to fpsimd_bind_task_to_cpu(), but
the logic for determining when to do this is not correct.

The patch makes the errnoenous assumption that the only task that
may try to enter userspace with the currently loaded FPSIMD/SVE
register content is current.  This may not be the case however:  if
some other user task T is scheduled on the CPU during the execution
of the KVM run loop, and the vcpu does not try to use the registers
in the meantime, then T's state may be left there intact.  If T
happens to be the next task to enter userspace on this CPU then the
hooks for reloading the register state and configuring traps will
be skipped.

(Also, current never has SVE state at this point anyway and should
always have the trap enabled, as a side-effect of the ioctl()
syscall needed to reach the KVM run loop in the first place.)

This patch instead restores the state of the EL0 trap from the
state observed at the most recent vcpu_load(), ensuring that the
trap is set correctly for the loaded context (if any).

Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
arm64: Introduce sysreg_clear_set() 2018-06-21T08:14:54+00:00 Mark Rutland mark.rutland@arm.com 2018-06-15T15:47:23+00:00 6ebdf4db8fa564a150f46d32178af0873eb5abbb Currently we have a couple of helpers to manipulate bits in particular sysregs: * config_sctlr_el1(u32 clear, u32 set) * change_cpacr(u64 val, u64 mask) The parameters of these differ in naming convention, order, and size, which is unfortunate. They also differ slightly in behaviour, as change_cpacr() skips the sysreg write if the bits are unchanged, which is a useful optimization when sysreg writes are expensive. Before we gain yet another sysreg manipulation function, let's unify these with a common helper, providing a consistent order for clear/set operands, and the write skipping behaviour from change_cpacr(). Code will be migrated to the new helper in subsequent patches. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Dave Martin <dave.martin@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> 
Currently we have a couple of helpers to manipulate bits in particular
sysregs:

 * config_sctlr_el1(u32 clear, u32 set)

 * change_cpacr(u64 val, u64 mask)

The parameters of these differ in naming convention, order, and size,
which is unfortunate. They also differ slightly in behaviour, as
change_cpacr() skips the sysreg write if the bits are unchanged, which
is a useful optimization when sysreg writes are expensive.

Before we gain yet another sysreg manipulation function, let's
unify these with a common helper, providing a consistent order for
clear/set operands, and the write skipping behaviour from
change_cpacr(). Code will be migrated to the new helper in subsequent
patches.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
docs: Fix some broken references 2018-06-15T21:10:01+00:00 Mauro Carvalho Chehab mchehab+samsung@kernel.org 2018-05-08T18:14:57+00:00 5fb94e9ca333f0fe1d96de06704a79942b3832c3 As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net> 
As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked if the produced result is valid, removing a few
false-positives.

Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm 2018-06-12T18:34:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-06-12T18:34:04+00:00 b357bf6023a948cf6a9472f07a1b0caac0e4f8e8 Pull KVM updates from Paolo Bonzini: "Small update for KVM: ARM: - lazy context-switching of FPSIMD registers on arm64 - "split" regions for vGIC redistributor s390: - cleanups for nested - clock handling - crypto - storage keys - control register bits x86: - many bugfixes - implement more Hyper-V super powers - implement lapic_timer_advance_ns even when the LAPIC timer is emulated using the processor's VMX preemption timer. - two security-related bugfixes at the top of the branch" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (79 commits) kvm: fix typo in flag name kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system KVM: x86: introduce linear_{read,write}_system kvm: nVMX: Enforce cpl=0 for VMX instructions kvm: nVMX: Add support for "VMWRITE to any supported field" kvm: nVMX: Restrict VMX capability MSR changes KVM: VMX: Optimize tscdeadline timer latency KVM: docs: nVMX: Remove known limitations as they do not exist now KVM: docs: mmu: KVM support exposing SLAT to guests kvm: no need to check return value of debugfs_create functions kvm: Make VM ioctl do valloc for some archs kvm: Change return type to vm_fault_t KVM: docs: mmu: Fix link to NPT presentation from KVM Forum 2008 kvm: x86: Amend the KVM_GET_SUPPORTED_CPUID API documentation KVM: x86: hyperv: declare KVM_CAP_HYPERV_TLBFLUSH capability KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX implementation KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} implementation KVM: introduce kvm_make_vcpus_request_mask() API KVM: x86: hyperv: do rep check for each hypercall separately ... 
Pull KVM updates from Paolo Bonzini:
 "Small update for KVM:

  ARM:
   - lazy context-switching of FPSIMD registers on arm64
   - "split" regions for vGIC redistributor

  s390:
   - cleanups for nested
   - clock handling
   - crypto
   - storage keys
   - control register bits

  x86:
   - many bugfixes
   - implement more Hyper-V super powers
   - implement lapic_timer_advance_ns even when the LAPIC timer is
     emulated using the processor's VMX preemption timer.
   - two security-related bugfixes at the top of the branch"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (79 commits)
  kvm: fix typo in flag name
  kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access
  KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system
  KVM: x86: introduce linear_{read,write}_system
  kvm: nVMX: Enforce cpl=0 for VMX instructions
  kvm: nVMX: Add support for "VMWRITE to any supported field"
  kvm: nVMX: Restrict VMX capability MSR changes
  KVM: VMX: Optimize tscdeadline timer latency
  KVM: docs: nVMX: Remove known limitations as they do not exist now
  KVM: docs: mmu: KVM support exposing SLAT to guests
  kvm: no need to check return value of debugfs_create functions
  kvm: Make VM ioctl do valloc for some archs
  kvm: Change return type to vm_fault_t
  KVM: docs: mmu: Fix link to NPT presentation from KVM Forum 2008
  kvm: x86: Amend the KVM_GET_SUPPORTED_CPUID API documentation
  KVM: x86: hyperv: declare KVM_CAP_HYPERV_TLBFLUSH capability
  KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX implementation
  KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} implementation
  KVM: introduce kvm_make_vcpus_request_mask() API
  KVM: x86: hyperv: do rep check for each hypercall separately
  ...
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux 2018-06-08T18:10:58+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-06-08T18:10:58+00:00 410feb75de245664d66bc05ab2e2412751d10acf Pull arm64 updates from Catalin Marinas: "Apart from the core arm64 and perf changes, the Spectre v4 mitigation touches the arm KVM code and the ACPI PPTT support touches drivers/ (acpi and cacheinfo). I should have the maintainers' acks in place. Summary: - Spectre v4 mitigation (Speculative Store Bypass Disable) support for arm64 using SMC firmware call to set a hardware chicken bit - ACPI PPTT (Processor Properties Topology Table) parsing support and enable the feature for arm64 - Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The primary motivation is Scalable Vector Extensions which requires more space on the signal frame than the currently defined MINSIGSTKSZ - ARM perf patches: allow building arm-cci as module, demote dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous cleanups - cmpwait() WFE optimisation to avoid some spurious wakeups - L1_CACHE_BYTES reverted back to 64 (for performance reasons that have to do with some network allocations) while keeping ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual hardware Cache Writeback Granule - Turn LSE atomics on by default in Kconfig - Kernel fault reporting tidying - Some #include and miscellaneous cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (53 commits) arm64: Fix syscall restarting around signal suppressed by tracer arm64: topology: Avoid checking numa mask for scheduler MC selection ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled arm64: cpu_errata: include required headers arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file arm64: signal: Report signal frame size to userspace via auxv arm64/sve: Thin out initialisation sanity-checks for sve_max_vl arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests arm64: KVM: Add ARCH_WORKAROUND_2 support for guests arm64: KVM: Add HYP per-cpu accessors arm64: ssbd: Add prctl interface for per-thread mitigation arm64: ssbd: Introduce thread flag to control userspace mitigation arm64: ssbd: Restore mitigation status on CPU resume arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation arm64: ssbd: Add global mitigation state accessor arm64: Add 'ssbd' command-line option arm64: Add ARCH_WORKAROUND_2 probing arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2 arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1 ... 
Pull arm64 updates from Catalin Marinas:
 "Apart from the core arm64 and perf changes, the Spectre v4 mitigation
  touches the arm KVM code and the ACPI PPTT support touches drivers/
  (acpi and cacheinfo). I should have the maintainers' acks in place.

  Summary:

   - Spectre v4 mitigation (Speculative Store Bypass Disable) support
     for arm64 using SMC firmware call to set a hardware chicken bit

   - ACPI PPTT (Processor Properties Topology Table) parsing support and
     enable the feature for arm64

   - Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The
     primary motivation is Scalable Vector Extensions which requires
     more space on the signal frame than the currently defined
     MINSIGSTKSZ

   - ARM perf patches: allow building arm-cci as module, demote
     dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous
     cleanups

   - cmpwait() WFE optimisation to avoid some spurious wakeups

   - L1_CACHE_BYTES reverted back to 64 (for performance reasons that
     have to do with some network allocations) while keeping
     ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual
     hardware Cache Writeback Granule

   - Turn LSE atomics on by default in Kconfig

   - Kernel fault reporting tidying

   - Some #include and miscellaneous cleanups"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (53 commits)
  arm64: Fix syscall restarting around signal suppressed by tracer
  arm64: topology: Avoid checking numa mask for scheduler MC selection
  ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled
  arm64: cpu_errata: include required headers
  arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file
  arm64: signal: Report signal frame size to userspace via auxv
  arm64/sve: Thin out initialisation sanity-checks for sve_max_vl
  arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID
  arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests
  arm64: KVM: Add ARCH_WORKAROUND_2 support for guests
  arm64: KVM: Add HYP per-cpu accessors
  arm64: ssbd: Add prctl interface for per-thread mitigation
  arm64: ssbd: Introduce thread flag to control userspace mitigation
  arm64: ssbd: Restore mitigation status on CPU resume
  arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation
  arm64: ssbd: Add global mitigation state accessor
  arm64: Add 'ssbd' command-line option
  arm64: Add ARCH_WORKAROUND_2 probing
  arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2
  arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1
  ...