Pull arm64 updates from Will Deacon: - Errata workarounds for Qualcomm's Falkor CPU - Qualcomm L2 Cache PMU driver - Qualcomm SMCCC firmware quirk - Support for DEBUG_VIRTUAL - CPU feature detection for userspace via MRS emulation - Preliminary work for the Statistical Profiling Extension - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (74 commits) arm64/kprobes: consistently handle MRS/MSR with XZR arm64: cpufeature: correctly handle MRS to XZR arm64: traps: correctly handle MRS/MSR with XZR arm64: ptrace: add XZR-safe regs accessors arm64: include asm/assembler.h in entry-ftrace.S arm64: fix warning about swapper_pg_dir overflow arm64: Work around Falkor erratum 1003 arm64: head.S: Enable EL1 (host) access to SPE when entered at EL2 arm64: arch_timer: document Hisilicon erratum 161010101 arm64: use is_vmalloc_addr arm64: use linux/sizes.h for constants arm64: uaccess: consistently check object sizes perf: add qcom l2 cache perf events driver arm64: remove wrong CONFIG_PROC_SYSCTL ifdef ARM: smccc: Update HVC comment to describe new quirk parameter arm64: do not trace atomic operations ACPI/IORT: Fix the error return code in iort_add_smmu_platform_device() ACPI/IORT: Fix iort_node_get_id() mapping entries indexing arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA perf: xgene: Include module.h ...
The Qualcomm Datacenter Technologies Falkor v1 CPU may allocate TLB entries using an incorrect ASID when TTBRx_EL1 is being updated. When the erratum is triggered, page table entries using the new translation table base address (BADDR) will be allocated into the TLB using the old ASID. All circumstances leading to the incorrect ASID being cached in the TLB arise when software writes TTBRx_EL1[ASID] and TTBRx_EL1[BADDR], a memory operation is in the process of performing a translation using the specific TTBRx_EL1 being written, and the memory operation uses a translation table descriptor designated as non-global. EL2 and EL3 code changing the EL1&0 ASID is not subject to this erratum because hardware is prohibited from performing translations from an out-of-context translation regime. Consider the following pseudo code. write new BADDR and ASID values to TTBRx_EL1 Replacing the above sequence with the one below will ensure that no TLB entries with an incorrect ASID are used by software. write reserved value to TTBRx_EL1[ASID] ISB write new value to TTBRx_EL1[BADDR] ISB write new value to TTBRx_EL1[ASID] ISB When the above sequence is used, page table entries using the new BADDR value may still be incorrectly allocated into the TLB using the reserved ASID. Yet this will not reduce functionality, since TLB entries incorrectly tagged with the reserved ASID will never be hit by a later instruction. Based on work by Shanker Donthineni <shankerd@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
When CONFIG_RANDOMIZE_MODULE_REGION_FULL=y, the offset between loaded modules and the core kernel may exceed 4 GB, putting symbols exported by the core kernel out of the reach of the ordinary adrp/add instruction pairs used to generate relative symbol references. So make the adr_l macro emit a movz/movk sequence instead when executing in module context. While at it, remove the pointless special case for the stack pointer. Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds the uaccess macros/functions to disable access to user space by setting TTBR0_EL1 to a reserved zeroed page. Since the value written to TTBR0_EL1 must be a physical address, for simplicity this patch introduces a reserved_ttbr0 page at a constant offset from swapper_pg_dir. The uaccess_disable code uses the ttbr1_el1 value adjusted by the reserved_ttbr0 offset. Enabling access to user is done by restoring TTBR0_EL1 with the value from the struct thread_info ttbr0 variable. Interrupts must be disabled during the uaccess_ttbr0_enable code to ensure the atomicity of the thread_info.ttbr0 read and TTBR0_EL1 write. This patch also moves the get_thread_info asm macro from entry.S to assembler.h for reuse in the uaccess_ttbr0_* macros. Cc: Will Deacon <will.deacon@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch takes the errata workaround code out of cpu_do_switch_mm into a dedicated post_ttbr0_update_workaround macro which will be reused in a subsequent patch. Cc: Will Deacon <will.deacon@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Kees Cook <keescook@chromium.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Shortly we will want to load a percpu variable in the return from
userspace path. We can save an instruction by folding the addition of
the percpu offset into the load instruction, and this patch adds a new
helper to do so.
At the same time, we clean up this_cpu_ptr for consistency. As with
{adr,ldr,str}_l, we change the template to take the destination register
first, and name this dst. Secondly, we rename the macro to adr_this_cpu,
following the scheme of adr_l, and matching the newly added
ldr_this_cpu.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
NOP sequences tend to get used for padding out alternative sections and uarch-specific pipeline flushes in errata workarounds. This patch adds macros for generating these sequences as both inline asm blocks, but also as strings suitable for embedding in other asm blocks directly. Signed-off-by: Will Deacon <will.deacon@arm.com>
Systems with differing CPU i-cache/d-cache line sizes can cause problems with the cache management by software when the execution is migrated from one to another. Usually, the application reads the cache size on a CPU and then uses that length to perform cache operations. However, if it gets migrated to another CPU with a smaller cache line size, things could go completely wrong. To prevent such cases, always use the smallest cache line size among the CPUs. The kernel CPU feature infrastructure already keeps track of the safe value for all CPUID registers including CTR. This patch works around the problem by : For kernel, dynamically patch the kernel to read the cache size from the system wide copy of CTR_EL0. For applications, trap read accesses to CTR_EL0 (by clearing the SCTLR.UCT) and emulate the mrs instruction to return the system wide safe value of CTR_EL0. For faster access (i.e, avoiding to lookup the system wide value of CTR_EL0 via read_system_reg), we keep track of the pointer to table entry for CTR_EL0 in the CPU feature infrastructure. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
On systems with mismatched i/d cache min line sizes, we need to use the smallest size possible across all CPUs. This will be done by fetching the system wide safe value from CPU feature infrastructure. However the some special users(e.g kexec, hibernate) would need the line size on the CPU (rather than the system wide), when either the system wide feature may not be accessible or it is guranteed that the caller executes with a gurantee of no migration. Provide another helper which will fetch cache line size on the current CPU. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Acked-by: James Morse <james.morse@arm.com> Reviewed-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
The newly introduced dcache_by_line_op macro is used at least in one occassion at the moment to issue a "dc cvau" instruction, which is affected by ARM errata 819472, 826319, 827319 and 824069. Change the macro to allow for alternative patching in there to protect affected Cortex-A53 cores. Signed-off-by: Andre Przywara <andre.przywara@arm.com> [catalin.marinas@arm.com: indentation fixups] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>