Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth and IPsec.

  The bridge patch is actually a follow-up to a recent fix in the same
  area. We have a pending v6.8 AF_UNIX regression; it should be solved
  soon, but not in time for this PR.

  Current release - regressions:

   - eth: ks8851: Queue RX packets in IRQ handler instead of disabling
     BHs

   - net: bridge: fix corrupted ethernet header on multicast-to-unicast

  Current release - new code bugs:

   - xfrm: fix possible bad pointer derferencing in error path

  Previous releases - regressionis:

   - core: fix out-of-bounds access in ops_init

   - ipv6:
      - fix potential uninit-value access in __ip6_make_skb()
      - fib6_rules: avoid possible NULL dereference in fib6_rule_action()

   - tcp: use refcount_inc_not_zero() in tcp_twsk_unique().

   - rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation

   - rxrpc: fix congestion control algorithm

   - bluetooth:
      - l2cap: fix slab-use-after-free in l2cap_connect()
      - msft: fix slab-use-after-free in msft_do_close()

   - eth: hns3: fix kernel crash when devlink reload during
     initialization

   - eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21
     family

  Previous releases - always broken:

   - xfrm: preserve vlan tags for transport mode software GRO

   - tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets

   - eth: hns3: keep using user config after hardware reset"

* tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
  net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports
  net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
  net: hns3: fix kernel crash when devlink reload during initialization
  net: hns3: fix port vlan filter not disabled issue
  net: hns3: use appropriate barrier function after setting a bit value
  net: hns3: release PTP resources if pf initialization failed
  net: hns3: change type of numa_node_mask as nodemask_t
  net: hns3: direct return when receive a unknown mailbox message
  net: hns3: using user configure after hardware reset
  net/smc: fix neighbour and rtable leak in smc_ib_find_route()
  ipv6: prevent NULL dereference in ip6_output()
  hsr: Simplify code for announcing HSR nodes timer setup
  ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()
  dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
  rxrpc: Only transmit one ACK per jumbo packet received
  rxrpc: Fix congestion control algorithm
  selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
  ipv6: Fix potential uninit-value access in __ip6_make_skb()
  net: phy: marvell-88q2xxx: add support for Rev B1 and B2
  appletalk: Improve handling of broadcast packets
  ...

One more Qualcomm Arm64 DeviceTree fix for v6.9

On ths SA8155P automotive platform, the wrong gpio controller is defined
for the SD-card detect pin, which depending on probe ordering of things
cause ethernet to be broken. The card detect pin reference is corrected
to solve this problem.

* tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration

Link: https://lore.kernel.org/r/20240427153817.1430382-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Bluetooth is not a random device connected to the MMC/SD controller. It
is function 2 of the SDIO device.

Fix the address of the bluetooth node. Also fix the node name and drop
the label.

Fixes: 055ef10ccdd4 ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

i.MX fixes for 6.9, round 2:

- Fix i.MX8MP the second CSI2 assigned-clock property which got wrong by
  commit f78835d1e616 ("arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF
  to CLK_24M")
- Correct USB over-current polarity for imx6ull-tarragon board

* tag 'imx-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6ull-tarragon: fix USB over-current polarity
  arm64: dts: imx8mp: Fix assigned-clocks for second CSI2

Link: https://lore.kernel.org/r/ZioopqscxwUOwQkf@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

MediaTek ARM64 DTS fixes for v6.9

This fixes some dts validation issues against bindings for multiple SoCs,
GPU voltage constraints for Chromebook devices, missing gce-client-reg
on various nodes (performance issues) on MT8183/92/95, and also fixes
boot issues on MT8195 when SPMI is built as module.

* tag 'mtk-dts64-fixes-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
  arm64: dts: mediatek: mt2712: fix validation errors
  arm64: dts: mediatek: mt7986: prefix BPI-R3 cooling maps with "map-"
  arm64: dts: mediatek: mt7986: drop invalid thermal block clock
  arm64: dts: mediatek: mt7986: drop "#reset-cells" from Ethernet controller
  arm64: dts: mediatek: mt7986: drop invalid properties from ethsys
  arm64: dts: mediatek: mt7622: drop "reset-names" from thermal block
  arm64: dts: mediatek: mt7622: fix ethernet controller "compatible"
  arm64: dts: mediatek: mt7622: fix IR nodename
  arm64: dts: mediatek: mt7622: fix clock controllers
  arm64: dts: mediatek: mt8186-corsola: Update min voltage constraint for Vgpu
  arm64: dts: mediatek: mt8183-kukui: Use default min voltage for MT6358
  arm64: dts: mediatek: mt8195-cherry: Update min voltage constraint for MT6315
  arm64: dts: mediatek: mt8192-asurada: Update min voltage constraint for MT6315
  arm64: dts: mediatek: cherry: Describe CPU supplies
  arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex1
  arm64: dts: mediatek: mt8195: Add missing gce-client-reg to mutex
  arm64: dts: mediatek: mt8195: Add missing gce-client-reg to vpp/vdosys
  arm64: dts: mediatek: mt8192: Add missing gce-client-reg to mutex
  arm64: dts: mediatek: mt8183: Add power-domains properity to mfgcfg

Qualcomm Arm64 DeviceTree fixes for v6.9

This corrects the watchdog IRQ flags for a number of remoteproc
instances, which otherwise prevents the driver from probe in the face of
a probe deferral.

Improvements in other areas, such as USB, have made it possible for CX
rail voltage on SC8280XP to be lowered, no longer meeting requirements
of active PCIe controllers. Necessary votes are added to these
controllers.

The MSI definitions for PCIe controllers in SM8450, SM8550, and SM8650
was incorrect, due to a bug in the driver. As this has now been fixed
the definition needs to be corrected.

Lastly, the SuperSpeed PHY irq of the second USB controller in SC8180x,
and the compatible string for X1 Elite domain idle states are corrected.

* tag 'qcom-arm64-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
  arm64: dts: qcom: sm8650: Fix the msi-map entries
  arm64: dts: qcom: sm8550: Fix the msi-map entries
  arm64: dts: qcom: sm8450: Fix the msi-map entries
  arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
  arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
  arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs

Link: https://lore.kernel.org/r/20240420161002.1132240-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

* 'v6.9-armsoc/dtsfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
  arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
  dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
  arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
  arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
  arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
  arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
  arm64: dts: rockchip: Designate the system power controller on QuartzPro64
  arm64: dts: rockchip: drop panel port unit address in GRU Scarlet
  arm64: dts: rockchip: Remove unsupported node from the Pinebook Pro dts
  arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi CM5
  arm64: dts: rockchip: add regulators for PCIe on RK3399 Puma Haikou
  arm64: dts: rockchip: enable internal pull-up on PCIE_WAKE# for RK3399 Puma
  arm64: dts: rockchip: enable internal pull-up on Q7_USB_ID for RK3399 Puma
  arm64: dts: rockchip: fix alphabetical ordering RK3399 puma
  arm64: dts: rockchip: enable internal pull-up for Q7_THRM# on RK3399 Puma
  arm64: dts: rockchip: set PHY address of MT7531 switch to 0x1f

Link: https://lore.kernel.org/r/3413596.CbtlEUcBR6@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The first CSI2 pixel clock are supplied from IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT,
the second CSI2 pixel clock are supplied from IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT,
both clock are supplied from SYS_PLL2 and configured using assigned-clock DT
properties. Each CSI2 DT node configures its IMX8MP_CLK_MEDIA_CAMn_PIX_ROOT
clock. This used to be the case until likely a copy-paste error in commit
f78835d1e616 ("arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF to CLK_24M")
which changed the second CSI2 node to configure IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT
using its assigned-clocks property.

Fix the second CSI2 assigned-clock property back to the original correct
IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT .

Fixes: f78835d1e616 ("arm64: dts: imx8mp: reparent MEDIA_MIPI_PHY1_REF to CLK_24M")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

There are two issues with SDHC2 configuration for SA8155P-ADP,
which prevent use of SDHC2 and causes issues with ethernet:

- Card Detect pin for SHDC2 on SA8155P-ADP is connected to gpio4 of
  PMM8155AU_1, not to SoC itself. SoC's gpio4 is used for DWMAC
  TX. If sdhc driver probes after dwmac driver, it reconfigures
  gpio4 and this breaks Ethernet MAC.

- pinctrl configuration mentions gpio96 as CD pin. It seems it was
  copied from some SM8150 example, because as mentioned above,
  correct CD pin is gpio4 on PMM8155AU_1.

This patch fixes both mentioned issues by providing correct pin handle
and pinctrl configuration.

Fixes: 0deb2624e2d0 ("arm64: dts: qcom: sa8155p-adp: Add support for uSD card")
Cc: stable@vger.kernel.org
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20240412190310.1647893-1-volodymyr_babchuk@epam.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

The correct compatible string for a USB interface node begins with
"usbif", not "usb". Fix the Rockchip RK3399 based Kobol Helios64 board.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240412204405.3703638-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>