Another missing supply and a wrong headphone gpio level.

* tag 'v6.17-rockchip-dtsfixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Fix the headphone detection on the orangepi 5
  arm64: dts: rockchip: Add vcc supply for SPI Flash on NanoPC-T6

i.MX fixes for 6.17, round 2:

- Fix mach-imx Kconfig to select the correct PIT timer option
  (Lukas Bulwahn)
- Correct thermal sensor index for i.MX8MP device tree (Peng Fan)
- Fix i.MX SCMI build error by adding stub API functions (Peng Fan)

* tag 'imx-fixes-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mp: Correct thermal sensor index
  ARM: imx: Kconfig: Adjust select after renamed config option
  firmware: imx: Add stub functions for SCMI CPU API
  firmware: imx: Add stub functions for SCMI LMM API
  firmware: imx: Add stub functions for SCMI MISC API

Link: https://lore.kernel.org/r/aMQs2zr4fYl2DYVr@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu fixes for 6.17 (part 1)

Fix SATA ports on various boards: Macchiatobin, CN913x-solidrun.
Fix audio on Armada 370 DB and OpenRD.
Disable eMMC high-speed modes on the CN9132 CEX-7 module.
Disable runtime reconfiguration for PCIe lanes on the CN9132 CEX-7 module.

* tag 'mvebu-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
  arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
  arm64: dts: marvell: cn913x-solidrun: fix sata ports status
  ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
  ARM64: dts: mcbin: fix SATA ports on Macchiatobin
  ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370

Link: https://lore.kernel.org/r/87ikhnn1pl.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The mvebu-comphy driver does not currently know how to pass correct
lane-count to ATF while configuring the serdes lanes.

This causes the system to hard reset during reconfiguration, if a pci
card is present and has established a link during bootloader.

Remove the comphy handles from the respective pci nodes to avoid runtime
reconfiguration, relying solely on bootloader configuration - while
avoiding the hard reset.

When bootloader has configured the lanes correctly, the pci ports are
functional under Linux.

This issue may be addressed in the comphy driver at a future point.

Fixes: e9ff907f4076 ("arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Similar to MacchiatoBIN the high-speed modes are unstable on the CN9132
CEX-7 module, leading to failed transactions under normal use.

Disable all high-speed modes including UHS.

Additionally add no-sdio and non-removable properties as appropriate for
eMMC.

Fixes: e9ff907f4076 ("arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Commit "arm64: dts: marvell: only enable complete sata nodes" changed
armada-cp11x.dtsi disabling all sata ports status by default.

The author missed some dts which relied on the dtsi enabling all ports,
and just disabled unused ones instead.

Update dts for SolidRun cn913x based boards to enable the available
ports, rather than disabling the unvavailable one.

Further according to dt bindings the serdes phys are to be specified in
the port node, not the controller node.
Move those phys properties accordingly in clearfog base/pro/solidwan.

Fixes: 30023876aef4 ("arm64: dts: marvell: only enable complete sata nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

The TMU has two temperature measurement sites located on the chip. The
probe 0 is located inside of the ANAMIX, while the probe 1 is located near
the ARM core. This has been confirmed by checking with HW design team and
checking RTL code.

So correct the {cpu,soc}-thermal sensor index.

Fixes: 30cdd62dce6b ("arm64: dts: imx8mp: Add thermal zones support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The logic of the headphone detect pin seems to be inverted, with this
change headphones actually output sound when plugged in.

Does not need workaround of using pin-switches to enable output.

Verified by checking /sys/kernel/debug/gpio.

Fixes: ae46756faff8 ("arm64: dts: rockchip: analog audio on Orange Pi 5")
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250904030150.986042-1-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

FriendlyELEC NanoPC-T6 LTS schematics shows VCC_1V8_S3 being used to
power SPI NOR chip.

This fixes the following kernel message:

spi-nor spi5.0: supply vcc not found, using dummy regulator

Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Link: https://lore.kernel.org/r/20250905-nanopc-t6-spi-nor-v2-1-098b476d9509@juszkiewicz.com.pl
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The newly added Rock 5T board needed slightly bigger fixes to make the
PCIe and USB actually work, because the PCIe does share its lanes between
two ports and the usb needs to toggle a gpio to supply power.

The other interesting fix is the headphone detection on the Orange Pi 5+.

The rest are some added supplies to make the boot log less scary and a
number of styling fixes.

* tag 'v6.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
  arm64: dts: rockchip: fix USB on RADXA ROCK 5T
  arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
  arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
  arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
  arm64: dts: rockchip: correct network description on Sige5
  arm64: dts: rockchip: Minor whitespace cleanup
  ARM: dts: rockchip: Minor whitespace cleanup
  arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
  arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
  arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-pinebook-pro
  arm64: dts: rockchip: mark eeprom as read-only for Radxa E52C

Link: https://lore.kernel.org/r/5909239.Y6S9NjorxK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>