Pull SoC fixes from Arnd Bergmann: "These are two fixes that came in late, one addresses a regression on a rockchips based board, the other is for ensuring a consistent dt binding for a device added in 6.16 before the incorrect one makes it into a release" * tag 'soc-fixes-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: rockchip: Drop netdev led-triggers on NanoPi R5S arm64: dts: allwinner: a523: Rename emac0 to gmac0
Sometimes the netdev triggers causes tasks to get blocked for more then
120 seconds, which in turn makes the (WAN) network port on the NanoPi
R5S fail to come up.
This results in the following (partial) trace:
INFO: task kworker/0:1:11 blocked for more than 120 seconds.
Not tainted 6.16-rc6+unreleased-arm64-cknow #1 Debian 6.16~rc6-1~exp1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00000010
Workqueue: events_power_efficient reg_check_chans_work [cfg80211]
Call trace:
__switch_to+0xf8/0x168 (T)
__schedule+0x3f8/0xda8
schedule+0x3c/0x120
schedule_preempt_disabled+0x2c/0x58
__mutex_lock.constprop.0+0x4d0/0xab8
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x50/0x68
rtnl_lock+0x20/0x38
reg_check_chans_work+0x40/0x478 [cfg80211]
process_one_work+0x178/0x3e0
worker_thread+0x260/0x390
kthread+0x150/0x250
ret_from_fork+0x10/0x20
INFO: task kworker/0:1:11 is blocked on a mutex likely owned by task dhcpcd:615.
task:dhcpcd state:D stack:0 pid:615 tgid:615 ppid:614 task_flags:0x400140 flags:0x00000018
Call trace:
__switch_to+0xf8/0x168 (T)
__schedule+0x3f8/0xda8
schedule+0x3c/0x120
schedule_preempt_disabled+0x2c/0x58
rwsem_down_write_slowpath+0x1e4/0x750
down_write+0x98/0xb0
led_trigger_register+0x134/0x1c0
phy_led_triggers_register+0xf4/0x258 [libphy]
phy_attach_direct+0x30c/0x390 [libphy]
phylink_fwnode_phy_connect+0xb0/0x138 [phylink]
__stmmac_open+0xec/0x520 [stmmac]
stmmac_open+0x4c/0xe8 [stmmac]
__dev_open+0x130/0x2e0
__dev_change_flags+0x1c4/0x248
netif_change_flags+0x2c/0x80
dev_change_flags+0x88/0xc8
devinet_ioctl+0x35c/0x610
inet_ioctl+0x204/0x260
sock_do_ioctl+0x6c/0x140
sock_ioctl+0x2e4/0x388
__arm64_sys_ioctl+0xb4/0x120
invoke_syscall+0x6c/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x188
el0t_64_sync_handler+0x10c/0x140
el0t_64_sync+0x198/0x1a0
In order to not introduce a regression with kernel 6.16, drop the netdev
triggers for now while the problem is being investigated further.
Fixes: 1631cbdb8089 ("arm64: dts: rockchip: Improve LED config for NanoPi R5S")
Helped-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250722123628.25660-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner fixes for 6.16 Only one fix: Correct the name of the A523's EMAC0 to GMAC0, as seen in the SoC's datasheets. The matching DT binding change is in the net tree. * tag 'sunxi-fixes-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a523: Rename emac0 to gmac0 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm DeviceTree fixes for v6.16 The RTC DeviceTree binding was changed in v6.16, to require an explicit flag indicating that we store RTC offset in in an UEFI variable. The result sent X Elite and Lenovo Thinkpad X13s users back to 1970, add the flag to explicitly select the correct configuration for these devices. * tag 'qcom-arm64-fixes-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: x1e80100: describe uefi rtc offset arm64: dts: qcom: sc8280xp-x13s: describe uefi rtc offset Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Switch to the gpio variant for spi-cs and mmc-detect for some boards as the in-controller functionality does not work as intended for them. HDMI drive strength adjustment for better ddc communication and some missing supplies. * tag 'v6.16-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add missing fan-supply to rk3566-quartz64-a arm64: dts: rockchip: use cs-gpios for spi1 on ringneck arm64: dts: rockchip: list all CPU supplies on ArmSoM Sige5 arm64: dts: rockchip: Add cd-gpios for sdcard detect on Cool Pi 4B arm64: dts: rockchip: Add cd-gpios for sdcard detect on Cool Pi CM5 arm64: dts: rockchip: Adjust the HDMI DDC IO driver strength for rk3588 arm64: dts: rockchip: fix rk3576 pcie1 linux,pci-domain Link: https://lore.kernel.org/r/5108768.AiC22s8V5E@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 6.16: - Keep LDO5 always on for imx8mm-verdin to fix broken Ethernet support - Add big-endian property back for LS1046A watchdog, as the removal was an accident - Fix DMA interrupter number of i.MX95 pcie0_ep device - A set of changes from Tim Harvey to fix TPM SPI frequency on imx8mp-venice devices - A couple of changes from Wei Fang to fix NETC overshoot issue on i.MX95 EVK boards * tag 'imx-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: freescale: imx8mm-verdin: Keep LDO5 always on arm64: dts: imx95: Correct the DMA interrupter number of pcie0_ep arm64: dts: add big-endian property back into watchdog node arm64: dts: imx95-15x15-evk: fix the overshoot issue of NETC arm64: dts: imx95-19x19-evk: fix the overshoot issue of NETC arm64: dts: imx8mp-venice-gw74xx: fix TPM SPI frequency arm64: dts: imx8mp-venice-gw73xx: fix TPM SPI frequency arm64: dts: imx8mp-venice-gw72xx: fix TPM SPI frequency arm64: dts: imx8mp-venice-gw71xx: fix TPM SPI frequency Link: https://lore.kernel.org/r/aGzNeZ7KtsRsUkZT@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The datasheets refer to the first Ethernet controller as GMAC0, not
EMAC0.
Fix the compatible string, node label and pinmux function name to match
what the datasheets use. A change to the device tree binding is sent
separately.
Fixes: 56766ca6c4f6 ("arm64: dts: allwinner: a523: Add EMAC0 ethernet MAC")
Fixes: acca163f3f51 ("arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board")
Fixes: c6800f15998b ("arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board")
Link: https://patch.msgid.link/20250628054438.2864220-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
LDO5 regulator is used to power the i.MX8MM NVCC_SD2 I/O supply, that is
used for the SD2 card interface and also for some GPIOs.
When the SD card interface is not enabled the regulator subsystem could
turn off this supply, since it is not used anywhere else, however this
will also remove the power to some other GPIOs, for example one I/O that
is used to power the ethernet phy, leading to a non working ethernet
interface.
[ 31.820515] On-module +V3.3_1.8_SD (LDO5): disabling
[ 31.821761] PMIC_USDHC_VSELECT: disabling
[ 32.764949] fec 30be0000.ethernet end0: Link is Down
Fix this keeping the LDO5 supply always on.
Cc: stable@vger.kernel.org
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Fixes: f5aab0438ef1 ("regulator: pca9450: Fix enable register for LDO5")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Correct the DMA interrupter number of pcie0_ep from 317 to 311.
Fixes: 3b1d5deb29ff ("arm64: dts: imx95: add pcie[0,1] and pcie-ep[0,1] support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Quartz 64 Model-A Schematic from 20210427 on page 7 shows that the fan's power supply is provided by VCC12V_DCIN. This fixes the following warning: gpio-fan gpio_fan: supply fan not found, using dummy regulator Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20250628142843.839150-1-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>