Pull ARM SoC fixes from Arnd Bergmann:
 "This should be the last set of bugfixes in the SoC tree:

   - Two fixes for Arm integrator, dealing with a regression caused by
     invalid DT properties combined with a change in dma address
     translation, and missing device_type annotations on the PCI bus

   - Fixes for drivers/reset/, addressing bugs in i.MX8MP, Sparx5 and
     NPCM8XX platforms

   - Bjorn Andersson's email address changes in the MAINTAINERS file

   - Multiple minor fixes to Qualcomm dts files, and a change to the
     remoteproc firmware filename that did not match the actual path in
     the linux-firmware package

   - Minor code fixes for the Allwinner/sunxi SRAM driver, and the
     broadcom STB Bus Interface Unit driver

   - A build fix for the sunplus sp7021 platform

   - Two dts fixes for TI OMAP family SoCs, addressing an extraneous
     usb4 device node and an incorrect DMA handle"

* tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: integrator: Fix DMA ranges
  ARM: dts: integrator: Tag PCI host with device_type
  ARM: sunplus: fix serial console kconfig and build problems
  reset: npcm: fix iprst2 and iprst4 setting
  arm64: dts: qcom: sm8350: fix UFS PHY serdes size
  soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()
  arm64: dts: qcom: sc8280xp-x13s: Update firmware location
  soc: sunxi: sram: Fix debugfs info for A64 SRAM C
  soc: sunxi: sram: Fix probe function ordering issues
  soc: sunxi: sram: Prevent the driver from being unbound
  soc: sunxi: sram: Actually claim SRAM regions
  ARM: dts: am5748: keep usb4_tm disabled
  reset: microchip-sparx5: issue a reset on startup
  reset: imx7: Fix the iMX8MP PCIe PHY PERST support
  MAINTAINERS: Update Bjorn's email address
  arm64: dts: qcom: sc7280: move USB wakeup-source property
  arm64: dts: qcom: thinkpad-x13s: Fix firmware location
  arm64: dts: qcom: sm8150: Fix fastrpc iommu values
  ARM: dts: am33xx: Fix MMCHS0 dma properties

Qualcomm ARM64 DTS fixes for 6.0

This corrects invalid IOMMU streams for the SM8150 CDSP FastRPC, moves
the wakeup-source of SC7280 USB nodes to the correct place, fixes the
SM8350 UFS PHY serdes size to not overlap with the other subnodes and
updates the firmware location for the Lenovo ThinkPad X13s to match the
movement in linux-firmware.

It also updates MAINTAINERS and .mailmap to reflect the changes in my
email address.

* tag 'qcom-arm64-fixes-for-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: sm8350: fix UFS PHY serdes size
  arm64: dts: qcom: sc8280xp-x13s: Update firmware location
  MAINTAINERS: Update Bjorn's email address
  arm64: dts: qcom: sc7280: move USB wakeup-source property
  arm64: dts: qcom: thinkpad-x13s: Fix firmware location
  arm64: dts: qcom: sm8150: Fix fastrpc iommu values

Link: https://lore.kernel.org/r/20220921142939.1310163-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The size of the UFS PHY serdes register region is 0x1c4 and the
corresponding 'reg' property should specifically not include the
adjacent regions that are defined in the child node (e.g. tx and rx).

Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220916093603.24263-1-johan+linaro@kernel.org

i.MX fixes for 6.0, 2nd round:

- A couple of TQMa8MPQL device tree fixes from Alexander Stein on button
  GPIOs and PCF85063 RTC alarm pinctrl.
- Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix
  build errors when this SoM dtsi is included on customer carrier boards.
- Remove GPU power domain reset from i.MX8MN device tree to fix
  a sporadical hang seen with GPUMIX powering up.
- Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo
  board.
- Add ARCH_NXP back to defconfig, which was dropped accidentally by
  commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms
  together").
- Add missing #reset-cells for i.MX8ULP PCC clock controllers.
- Update PMIC voltages for imx8mm-verdin board to fix an issue with one
  Toradex SKU that uses a consumer-grade chip that is capable of going up
  to 1.8GHz at 1.00V.
- A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey
  to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and
  phy-mode.

* tag 'imx-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
  arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
  arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
  arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
  arm64: defconfig: enable ARCH_NXP
  arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
  arm64: dts: imx8mm-verdin: extend pmic voltages
  arm64: dts: imx8ulp: add #reset-cells for pcc
  arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
  arm64: dts: imx8mn: remove GPU power domain reset
  arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The firmware location in linux-firmware has been changed to include the
SoC name. So use the updated location in Thinkpad devicetree.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220914073922.7145-1-manivannan.sadhasivam@linaro.org

Since commit 65ac79e18120 ("net: dsa: microchip: add the phylink
get_caps") the phy-mode must be set otherwise the switch driver will
assume "NA" mode and invalidate the port.

Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The CPU uplink port on the KSZ9477 is P5 not P6 - fix this.

Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The CAN STBY poarlity is active-low. Specify it as such by removing the
'enable-active-high' property and updating the gpio property.

Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Drop some not-specified properties, fix phy-supply properties,
fix edp clock on Gru, fix usb port on BPI-R2-Pro, fix license typo,
fix wlan-wake-pin on Gru-Bob and lower the sd-card speed on Quartz64-B

* tag 'v6.0-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a
  arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
  arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10
  arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a
  arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
  arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
  arm64: dts: rockchip: Fix typo in lisense text for PX30.Core
  arm64: dts: rockchip: Pull up wlan wake# on Gru-Bob
  arm64: dts: rockchip: Lower sd speed on quartz64-b

Link: https://lore.kernel.org/r/2645885.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

imx8mm-tqma8mqml.dtsi has PCIe support, so it should include
<dt-bindings/phy/phy-imx8-pcie.h>.

Otherwise, there are build errors when this SoM dtsi is included
on customers' carrier boards.

While at it, remove the PCI header from imx8mm-tqma8mqml-mba8mx.dts,
which is now unneeded.

Fixes: 1d84283101fc ("arm64: dts: tqma8mqml: add PCIe support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>