A fix for the Beelink A1 IR receiver setting the correct polarity.

* tag 'v5.5-rockchip-dtsfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Fix IR on Beelink A1

Link: https://lore.kernel.org/r/2054603.JKFSmqfO19@phil
Signed-off-by: Olof Johansson <olof@lixom.net>

A couple of fixes for GPIO polarity and regulators on the A64
olinuxino.

* tag 'sunxi-fixes-for-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity
  arm64: dts: allwinner: a64: olinuxino: Fix SDIO supply regulator
  arm64: dts: allwinner: a64: olinuxino: Fix eMMC supply regulator

Link: https://lore.kernel.org/r/582f4fda-38af-43e8-af58-957aee5b9dd8.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>

i.MX fixes for 5.5, round 2:

 - Fix i.MX8MM SDMA1 AHB clock setting to remove a "Timeout waiting for CH0"
   error seen with UART1.
 - Correct compatible of RV3029 RTC device on imx6q-dhcom board.
 - Correct interrupt trigger type for magnetometer on board
   imx8mq-librem5-devkit.
 - A series from Anson Huang to fix vdd3p0 power supplier for a few NXP
   development board.
 - Fix imx6q-icore-mipi board to use 1.5 version of i.Core MX6DL, so
   that Ethernet interface on the board works properly.
 - Fix Toradex Colibri board to get NAND flash support back.
 - Fix SGTL5000 VDDIO regulator connection for imx6q-dhcom, which
   is connected to PMIC SW2 output rather than a fixed 3V3 rail.
 - Fix 'reg' of CPU node on imx7ulp to get rid of a warning given by
   kernel.
 - Fix endian setting for DCFG on LS1028A SoC, so that register access
   of DCFG becomes correct.

* tag 'imx-fixes-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
  ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
  ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
  ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
  arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometer
  ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connection
  ARM: dts: imx7ulp: fix reg of cpu node
  arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mm
  arm64: dts: ls1028a: fix endian setting for dcfg
  ARM: dts: imx6q-dhcom: fix rtc compatible

Link: https://lore.kernel.org/r/20200110011836.GW4456@T480
Signed-off-by: Olof Johansson <olof@lixom.net>

arm-soc: Amlogic fixes for v5.5-rc

* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt
  dt-bindings: reset: meson8b: fix duplicate reset IDs
  soc: amlogic: meson-ee-pwrc: propagate errors from pm_genpd_init()
  soc: amlogic: meson-ee-pwrc: propagate PD provider registration errors
  ARM: dts: meson8: fix the size of the PMU registers
  arm64: dts: meson-sm1-sei610: gpio-keys: switch to IRQs

Link: https://lore.kernel.org/r/7hmuaweavi.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>

Apparently I wasn't paying enough attention... And nor is the lazy
test of `cat /dev/lirc0` sufficiently blunder-proof. Oh well, with
the correct polarity, let's also hook up a keymap now that one for
the standard Beelink remote has handily appeared.

Fixes: 79702ded8c2f ("arm64: dts: rockchip: Add Beelink A1")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/44269c08e2a5d75b03ded87d2eb11621762d8249.1577636223.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The LSM9DS1 uses a high level interrupt.

Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Fixes: eb4ea0857c83 ("arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Using SDMA1 with UART1 is causing a "Timeout waiting for CH0" error.
This patch changes to ahb clock from SDMA1_ROOT to AHB which
fixes the timeout error.

Fixes:  a05ea40eb384 ("arm64: dts: imx: Add i.mx8mm dtsi support")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

DCFG block uses little endian.  Fix it so that register access becomes
correct.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Yangbo Lu <yangbo.lu@nxp.com>
Fixes: 8897f3255c9c ("arm64: dts: Add support for NXP LS1028A SoC")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arm64: dts: agilex/stratix10: fix pmu interrupt numbers
- Fix incorrect PMU interrupts numbers on the Agilex/Stratix10 platforms

* tag 'socfpga_dts_fix_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: agilex/stratix10: fix pmu interrupt numbers

Link: https://lore.kernel.org/r/20191218161336.32377-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>

Fix up the correct interrupt numbers for the PMU unit on Agilex
and Stratix10.

Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi")
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>