This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 5.19, please pull the following:

- William corrects the BCM4906 DTS to have an armv8-timer Device Tree,
  necessary for booting, and fixes the BCM4908 DTS to have a proper
  'enable-method' and 'cpu-release-addr' properties for the kernel to boot
  when using u-boot

* tag 'arm-soc/for-5.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
  arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC

Link: https://lore.kernel.org/r/20220712231222.97850-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX fixes for 5.19, round 3:

- Fix GPIO property for imx6qdl-ts7970 board.
- Fix touchscreen pinctrl for imx6ull-colibri board by moving iomuxc-snvs
  pin to the correct controller device.
- Fix SFP node of fsl-ls1028a to have a required clock property.

* tag 'imx-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: colibri-imx6ull: fix snvs pinmux group
  ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count
  arm64: dts: ls1028a: Update SFP node to include clock

Link: https://lore.kernel.org/r/20220709032716.GA9868@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add spin-table enable-method and cpu-release-addr properties for
cpu0 node. This is required by all ARMv8 SoC. Otherwise some
bootloader like u-boot can not update cpu-release-addr and linux
fails to start up secondary cpus.

Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

The cpu mask value in interrupt property inherits from bcm4908.dtsi
which sets to four cpus. Correct the value to two cpus for dual core
BCM4906 SoC.

Fixes: c8b404fb05dc ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

rk3399 vdu clock-rate fix, otg port fix on Quartz64-A and ethernet
fix on Quartz64-B (actual production model)

* tag 'v5.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Assign RK3399 VDU clock rate
  arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior
  arm64: dts: rockchip: Fix ethernet on production Quartz64-B

Link: https://lore.kernel.org/r/7723415.29KlJPOoH8@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The clocks property is now mandatory. Add it to avoid warning message.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Fixes: eba5bea8f37f ("arm64: dts: ls1028a: add efuse node")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Qualcomm ARM64 DT fixes for v5.19

This removes duplicate includes in the sc7180-trogdor files, which
accidentally ended up disabling nodes intended to be enabled.

It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's
interconnects property is updated to match the #interconnect-cells,
avoiding sync_state issues and the GIC ITS is defined, to correct the
references from the PCIe nodes. On SDM845 the display subsystem's AHB
clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2
are correctly specified.

Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC.

* tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
  MAINTAINERS: Add myself as a reviewer for Qualcomm ARM/64 support
  arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node
  arm64: dts: qcom: sm8450 add ITS device tree node
  arm64: dts: qcom: msm8994: Fix CPU6/7 reg values
  arm64: dts: qcom: sm8450: fix interconnects property of UFS node
  arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar

Link: https://lore.kernel.org/r/20220703030208.408109-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX fixes for 5.19, round 2:

- Fix the SDIO description for imx7d-smegw01 board to ensure there is
  no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
  IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
  regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
  based boards to leave reserved bits untouched.

* tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
  arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
  arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
  arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
  arm64: dts: imx8mp-venice-gw74xx: correct pad settings
  arm64: dts: imx8mp-evk: correct I2C3 pad settings
  arm64: dts: imx8mp-evk: correct I2C1 pad settings
  arm64: dts: imx8mp-evk: correct I2C5 pad settings
  arm64: dts: imx8mp-evk: correct vbus pad settings
  arm64: dts: imx8mp-evk: correct eqos pad settings
  arm64: dts: imx8mp-evk: correct vbus pad settings
  arm64: dts: imx8mp-evk: correct gpio-led pad settings
  arm64: dts: imx8mp-evk: correct the uart2 pinctl value
  arm64: dts: imx8mp-evk: correct mmc pad settings
  ARM: mxs_defconfig: Enable the framebuffer
  arm64: dts: imx8mp: correct clock of pgc_ispdwp
  ARM: dts: imx7d-smegw01: Fix the SDIO description

Link: https://lore.kernel.org/r/20220629021244.GL819983@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

"make dtbs_check" complains about the missing "-supply" suffix for
vdd_lvs1_2 which is clearly a typo, originally introduced in the
msm8994-smd-rpm.dtsi file and apparently later copied to
msm8992-xiaomi-libra.dts:

msm8992-lg-bullhead-rev-10/101.dtb: pm8994-regulators: 'vdd_lvs1_2'
does not match any of the regexes:
  '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
From schema: regulator/qcom,smd-rpm-regulator.yaml

msm8992-xiaomi-libra.dtb: pm8994-regulators: 'vdd_lvs1_2'
does not match any of the regexes:
  '.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
From schema: regulator/qcom,smd-rpm-regulator.yaml

Reported-by: Rob Herring <robh@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: f3b2c99e73be ("arm64: dts: Enable onboard SDHCI on msm8992")
Fixes: 0f5cdb31e850 ("arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220627135938.2901871-1-stephan.gerhold@kernkonzept.com

BIT3 and BIT0 are reserved bits, should not touch.

Fixes: aec8ad34f7f2 ("arm64: dts: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>