Pull ARM SoC fixes from Arnd Bergmann: "These should be the final fixes for v5.12. There is one fix for SD card detection on one Allwinner board, and a few fixes for the Tegra platform that I had already queued up for v5.13 due to a communication problem. This addresses MMC device ordering on multiple machines, audio support on Jetson AGX Xavier and suspend/resume on Jetson TX2" * tag 'arm-fixes-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS arm64: tegra: Move clocks from RT5658 endpoint to device node arm64: tegra: Fix mmc0 alias for Jetson Xavier NX arm64: tegra: Set fw_devlink=on for Jetson TX2 arm64: tegra: Add unit-address for ACONNECT on Tegra186
arm64: tegra: Device tree fixes for v5.12-rc6 This contains a couple of device tree fixes for the v5.12 release cycle. These are needed for proper audio support on Jetson AGX Xavier, to boot the Jetson Xavier NX from an SD card and to be able to suspend/resume the Jetson TX2. * tegra/dt64: arm64: tegra: Move clocks from RT5658 endpoint to device node arm64: tegra: Fix mmc0 alias for Jetson Xavier NX arm64: tegra: Set fw_devlink=on for Jetson TX2 arm64: tegra: Add unit-address for ACONNECT on Tegra186 Link: https://lore.kernel.org/linux-arm-kernel/YILD4yyPXuiYbHW1@orome.fritz.box/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
One fix for the MMC card detect on the Pine H64 board * tag 'sunxi-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS Link: https://lore.kernel.org/r/45fc5e4d-ef48-4729-a869-79a8f288bb83.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 941432d00768 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.
This was based on the observation that the Pine64-LTS has as "push-push"
SD card socket, and that the schematic mentions the card detect GPIO.
After having received two reports about failing SD card access with that
patch, some more research and polls on that subject revealed that there
are at least two different versions of the Pine64-LTS out there:
- On some boards (including mine) the card detect pin is "stuck" at
high, regardless of an microSD card being inserted or not.
- On other boards the card-detect is working, but is active-high, by
virtue of an explicit inverter circuit, as shown in the schematic.
To cover all versions of the board out there, and don't take any chances,
let's revert the introduction of the active-low CD GPIO, but let's use
the broken-cd property for the Pine64-LTS this time. That should avoid
regressions and should work for everyone, even allowing SD card changes
now.
The SOPine card detect has proven to be working, so let's keep that
GPIO in place.
Fixes: 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: Michael Weiser <michael.weiser@gmx.de>
Reported-by: Daniel Kulesz <kuleszdl@posteo.org>
Suggested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210414104740.31497-1-andre.przywara@arm.com
Pull ARM SoC fixes from Arnd Bergmann:
"Another smaller set of fixes for three of the Arm platforms:
TI OMAP:
Fix swapped mmc device order also for omap3 that got changed with
the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the
aliases should be board specific, all the mmc device instances are
all there in the SoC, and we do probe them by default so that PM
runtime can idle the devices if left enabled from the bootloader.
Qualcomm Snapdragon:
This bypasses the recently introduced interconnect handling in
the GENI (serial engine) driver when running off ACPI, as this
causes the GENI probe to fail and the Lenovo Yoga C630 to boot
without keyboard and touchpad.
Allwinner:
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the
SoPine, some MAINTAINERS maintainance, and a clk / reset switch to
our headers"
* tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
MAINTAINERS: Match on allwinner keyword
MAINTAINERS: Add our new mailing-list
arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
ARM: OMAP2+: Fix uninitialized sr_inst
ARM: dts: Fix swapped mmc order for omap3
ARM: OMAP2+: Fix warning for omap_init_time_of()
soc: qcom: geni: shield geni_icc_get() for ACPI boot
Change my e-mail address to kabel@kernel.org, and fix my name in non-code parts (add diacritical mark). Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine, some MAINTAINERS maintainance, and a clk / reset switch to our headers. * tag 'sunxi-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference MAINTAINERS: Match on allwinner keyword MAINTAINERS: Add our new mailing-list arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices Link: https://lore.kernel.org/r/9972a85e-60b7-49f4-a246-db3396dd4764.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Although every Beelink GS1 seems to have external 32768 Hz oscillator,
it works only on one from four tested. There are more reports of RTC
issues elsewhere, like Armbian forum.
One Beelink GS1 owner read RTC osc status register on Android which
shipped with the box. Reported value indicated problems with external
oscillator.
In order to fix RTC and related issues (HDMI-CEC and suspend/resume with
Crust) on all boards, switch to internal oscillator.
Fixes: 32507b868119 ("arm64: dts: allwinner: h6: Move ext. oscillator to board DTs")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210330184218.279738-1-jernej.skrabec@siol.net
Commit 941432d00768 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.
However while both boards indeed have a working CD GPIO on PF6, the
polarity is different: the SOPine modules uses a "push-pull" socket,
which has an active-high switch, while the Pine64-LTS use the more
traditional push-push socket and the common active-low switch.
Fix the polarity in the sopine.dtsi, and overwrite it in the LTS
board .dts, to make the SD card work again on systems using SOPine
modules.
Fixes: 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: Ashley <contact@victorianfox.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210316144219.5973-1-andre.przywara@arm.com
The macros for the clock and reset indices for the RSB hardware block were replaced with raw numbers when the RSB controller node was added. This was done to avoid cross-tree dependencies. Now that both the clk and DT changes have been merged, we can switch back to using the macros. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech>