Pull ARM SoC fixes from Olof Johansson:
 "The usual batch; most of them are DT tweaks to fix misdescribed
  hardware. Beyond that:

   - A bugfix for MMP2 CPU detection, it's been there quite a while but
     makes sense to fix now anyway.

   - Some power management tweaks:
      + disabling of CPU idle power state on Marvell Armada 7K/8K
        (Macchiatobin et al)
      + Increase of minimum voltage on BananaPi M3
      + Tweak of power ramp time for DVFS on NXP/Freescale i.MX7SX

   - A couple of MAINTAINER updates:
      + MMP has a new volunteer to look after it
      + Mediatek adds a few keywords, IRC channel and wiki URL"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: realview: Fix some more duplicate regulator nodes
  MAINTAINERS: update entry for MMP platform
  ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
  MAINTAINERS: mediatek: Update SoC entry
  ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
  arm64: dts: mt7622: Drop the general purpose timer node
  arm64: dts: mt7622: fix no more console output on BPI-R64 board
  arm64: dts: mt7622: fix no more console output on rfb1
  ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V

mvebu fixes for 4.20

Adding CPU Idle state in the device tree for Armada 8040 seems to
breaks boot on some board, so let's revert it waiting for a better
solution.

* tag 'mvebu-fixes-4.20-1' of git://git.infradead.org/linux-mvebu:
  Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"

Signed-off-by: Olof Johansson <olof@lixom.net>

Pull clk fixes from Stephen Boyd:
 "A few clk driver fixes this time:

   - Introduce protected-clock DT binding to fix breakage on qcom
     sdm845-mtp boards where the qspi clks introduced this merge window
     cause the firmware on those boards to take down the system if we
     try to read the clk registers

   - Fix a couple off-by-one errors found by Dan Carpenter

   - Handle failure in zynq fixed factor clk driver to avoid using
     uninitialized data"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: zynqmp: Off by one in zynqmp_is_valid_clock()
  clk: mmp: Off by one in mmp_clk_add()
  clk: mvebu: Off by one bugs in cp110_of_clk_get()
  arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks
  clk: qcom: Support 'protected-clocks' property
  dt-bindings: clk: Introduce 'protected-clocks' property
  clk: zynqmp: handle fixed factor param query error

This reverts commit 8ed46368776b3bc93d74c1f8f2bfb9fd8a9ad805.

This commit breaks boot on Armada 8K based systems. Reverting it makes
affected systems boot again.

Reported-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

DT mt7622:
- Kernelci awaits a working stdout-path.
  Fix the path for reference board and bananapi-r64
- General propouse timer has issues with clocks that didn't
  get probed early. Delete the DT node as the timer isn't
  need, a ARM arch timer exists on the system.

* tag 'v4.19-next-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt7622: Drop the general purpose timer node
  arm64: dts: mt7622: fix no more console output on BPI-R64 board
  arm64: dts: mt7622: fix no more console output on rfb1

Signed-off-by: Olof Johansson <olof@lixom.net>

Removal of vdd_log regulator on rk960 to fix a stability issue
and fixup of the pcie reset polarity on puma-haikou.

* tag 'v4.20-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
  arm64: dts: rockchip: remove vdd_log from rock960 to fix a stability issues

Signed-off-by: Olof Johansson <olof@lixom.net>

As of v4.20-rc1 probing the GCC driver on a SDM845 device with the
standard security implementation causes an access violation and an
immediate system restart. Use the protected-clocks property to mark the
offending clocks protected for the MTP, in order to allow it to boot.

Cc: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

MediaTeks general purpose timer register into system in early phase
during kernel boot, but the clock sources aren't probed at this point.

The system has the ARM architecture timer, so we don't need the GPT
timer from mediatek. Drop the DT node for it.

Fixes: 9cc7f0de9e67 ("arm64: dts: mt7622: add timer, CCI-400 and PMU nodes")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
[mb: fix commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Fix this by using a 'stdout-path' property that points to the device.

Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

No default serial console on boot.
Fix this by using a 'stdout-path' property that points to the device.

Fixes: c0d9f9ad4f76 ("arm64: dts: mt7622: add earlycon to mt7622-rfb1 board")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[mb: Fix commit message]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>