Pull ARM updates from Russell King: - decompressor updates - prevention of out-of-bounds access while stacktracing - fix a section mismatch warning with free_memmap() - make kexec depend on MMU to avoid some build errors - remove swapops stubs * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8954/1: NOMMU: remove stubs for swapops ARM: 8952/1: Disable kmemleak on XIP kernels ARM: 8951/1: Fix Kexec compilation issue. ARM: 8949/1: mm: mark free_memmap as __init ARM: 8948/1: Prevent OOB access in stacktrace ARM: 8945/1: decompressor: use CONFIG option instead of cc-option ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before cleaning the cache" ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache setup code
The stacktrace code can read beyond the stack size, when it attempts to read pt_regs from exception frames. This can happen on normal, non-corrupt stacks. Since the unwind information in the extable is not correct for function prologues, the unwinding code can return data from the stack which is not actually the caller function address, and if in_entry_text() happens to succeed on this value, we can end up reading data from outside the task's stack when attempting to read pt_regs, since there is no bounds check. Example: [<8010e729>] (unwind_backtrace) from [<8010a9c9>] (show_stack+0x11/0x14) [<8010a9c9>] (show_stack) from [<8057d8d7>] (dump_stack+0x87/0xac) [<8057d8d7>] (dump_stack) from [<8012271d>] (tasklet_action_common.constprop.4+0xa5/0xa8) [<8012271d>] (tasklet_action_common.constprop.4) from [<80102333>] (__do_softirq+0x11b/0x31c) [<80102333>] (__do_softirq) from [<80122485>] (irq_exit+0xad/0xd8) [<80122485>] (irq_exit) from [<8015f3d7>] (__handle_domain_irq+0x47/0x84) [<8015f3d7>] (__handle_domain_irq) from [<8036a523>] (gic_handle_irq+0x43/0x78) [<8036a523>] (gic_handle_irq) from [<80101a49>] (__irq_svc+0x69/0xb4) Exception stack(0xeb491f58 to 0xeb491fa0) 1f40: 7eb14794 00000000 1f60: ffffffff 008dd32c 008dd324 ffffffff 008dd314 0000002a 801011e4 eb490000 1f80: 0000002a 7eb1478c 50c5387d eb491fa8 80101001 8023d09c 40080033 ffffffff [<80101a49>] (__irq_svc) from [<8023d09c>] (do_pipe2+0x0/0xac) [<8023d09c>] (do_pipe2) from [<ffffffff>] (0xffffffff) Exception stack(0xeb491fc8 to 0xeb492010) 1fc0: 008dd314 0000002a 00511ad8 008de4c8 7eb14790 7eb1478c 1fe0: 00511e34 7eb14774 004c8557 76f44098 60080030 7eb14794 00000000 00000000 2000: 00000001 00000000 ea846c00 ea847cc0 In this example, the stack limit is 0xeb492000, but 16 bytes outside the stack have been read. Fix it by adding bounds checks. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Switch the entry code, cache over to use CONFIG_PREEMPTION and add output in show_stack() for PREEMPT_RT. [bigeasy: +traps.c] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20191015191821.11479-2-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
Pull ARM updates from Russell King: - Add a "cut here" to make it clearer where oops dumps should be cut from - we already have a marker for the end of the dumps. - Add logging severity to show_pte() - Drop unnecessary common-page-size linker flag - Errata workarounds for Cortex A12 857271, Cortex A17 857272 and Cortex A7 814220. - Remove some unused variables that had started to provoke a compiler warning. * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8863/1: stm32: select ARM errata 814220 ARM: 8862/1: errata: 814220-B-Cache maintenance by set/way operations can execute out of order ARM: 8865/1: mm: remove unused variables ARM: 8864/1: Add workaround for I-Cache line size mismatch between CPU cores ARM: 8861/1: errata: Workaround errata A12 857271 / A17 857272 ARM: 8860/1: VDSO: Drop implicit common-page-size linker flag ARM: arrange show_pte() to issue severity-based messages ARM: add "8<--- cut here ---" to kernel dumps
show_pte() is used to print information after various other kernel messages, which themselves are printed at different severities. Include the severity in the show_pte() information so that associated messages are printed with the same severity. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add a "8<--- cut here ---" marker to kernel dumps to help users cut the dump at the right place when emailing list, rather than cutting off the first line which gives the reason for the dump. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The ptrace_break function is always called with tsk == current. Make that obvious by removing the tsk parameter. This also makes it clear that ptrace_break calls force_sig_fault on the current task. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>