linux.git/arch/arm/kernel/smp.c, branch v4.20

Merge branch 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm

2018-11-18T18:45:09+00:00

Pull ARM spectre updates from Russell King:
 "These are the currently known final bits that resolve the Spectre
  issues. big.Little systems used to be sufficiently identical in that
  there were no differences between individual CPUs in the system that
  mattered to the kernel. With the advent of the Spectre problem, the
  CPUs now have differences in how the workaround is applied.

  As a result of previous Spectre patches, these systems ended up
  reporting quite a lot of:

     "CPUx: Spectre v2: incorrect context switching function, system vulnerable"

  messages due to the action of the big.Little switcher causing the CPUs
  to be re-initialised regularly. This series resolves that issue by
  making the CPU vtable unique to each CPU.

  However, since this is used very early, before per-cpu is setup,
  per-cpu can't be used. We also have a problem that two of the methods
  are not called from preempt-safe paths, but thankfully these remain
  identical between all CPUs in the system. To make sure, we validate
  that these are identical during boot"

* 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: spectre-v2: per-CPU vtables to work around big.Little systems
  ARM: add PROC_VTABLE and PROC_TABLE macros
  ARM: clean up per-processor check_bugs method call
  ARM: split out processor lookup
  ARM: make lookup_processor_type() non-__init

ARM: spectre-v2: per-CPU vtables to work around big.Little systems

2018-11-12T10:51:01+00:00

In big.Little systems, some CPUs require the Spectre workarounds in
paths such as the context switch, but other CPUs do not.  In order
to handle these differences, we need per-CPU vtables.

We are unable to use the kernel's per-CPU variables to support this
as per-CPU is not initialised at times when we need access to the
vtables, so we have to use an array indexed by logical CPU number.

We use an array-of-pointers to avoid having function pointers in
the kernel's read/write .data section.

Reviewed-by: Julien Thierry 
Signed-off-by: Russell King

Merge branches 'fixes', 'misc' and 'spectre' into for-linus

2018-06-05T09:03:27+00:00

ARM: bugs: hook processor bug checking into SMP and suspend paths

2018-05-31T09:39:29+00:00

Check for CPU bugs when secondary processors are being brought online,
and also when CPUs are resuming from a low power mode.  This gives an
opportunity to check that processor specific bug workarounds are
correctly enabled for all paths that a CPU re-enters the kernel.

Signed-off-by: Russell King 
Reviewed-by: Florian Fainelli 
Boot-tested-by: Tony Lindgren 
Reviewed-by: Tony Lindgren 
Acked-by: Marc Zyngier

ARM: 8765/1: smp: Move clear_tasks_mm_cpumask() call to __cpu_die()

2018-05-19T10:53:46+00:00

Suspending a CPU on a RT kernel results in the following backtrace:

| Disabling non-boot CPUs ...
| BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
| in_atomic(): 1, irqs_disabled(): 128, pid: 18, name: migration/1
| INFO: lockdep is turned off.
| irq event stamp: 122
| hardirqs last  enabled at (121): [] _raw_spin_unlock_irqrestore+0x88/0x90
| hardirqs last disabled at (122): [] _raw_spin_lock_irq+0x28/0x5c
|  CPU: 1 PID: 18 Comm: migration/1 Tainted: G        W       4.1.4-rt3-01046-g96ac8da #204
| Hardware name: Generic DRA74X (Flattened Device Tree)
| [] (unwind_backtrace) from [] (show_stack+0x20/0x24)
| [] (show_stack) from [] (dump_stack+0x88/0xdc)
| [] (dump_stack) from [] (___might_sleep+0x198/0x2a8)
| [] (___might_sleep) from [] (rt_spin_lock+0x30/0x70)
| [] (rt_spin_lock) from [] (find_lock_task_mm+0x9c/0x174)
| [] (find_lock_task_mm) from [] (clear_tasks_mm_cpumask+0xb4/0x1ac)
| [] (clear_tasks_mm_cpumask) from [] (__cpu_disable+0x98/0xbc)
| [] (__cpu_disable) from [] (take_cpu_down+0x1c/0x50)
| [] (take_cpu_down) from [] (multi_cpu_stop+0x11c/0x158)
| [] (multi_cpu_stop) from [] (cpu_stopper_thread+0xc4/0x184)
| [] (cpu_stopper_thread) from [] (smpboot_thread_fn+0x18c/0x324)
| [] (smpboot_thread_fn) from [] (kthread+0xe8/0x104)
| [] (kthread) from [] (ret_from_fork+0x14/0x3c)
| CPU1: shutdown

The root cause of above backtrace is task_lock() which takes a sleeping
lock on -RT.

To fix the issue, move clear_tasks_mm_cpumask() call from __cpu_disable()
to __cpu_die() which is called on the thread which is asking for a target
CPU to be shutdown. In addition, this change restores CPU hotplug
functionality on ARM CPU1 can be unplugged/plugged many times.

Link: http://lkml.kernel.org/r/1441995683-30817-1-git-send-email-grygorii.strashko@ti.com
[bigeasy: slighty edited the commit message]

Signed-off-by: Grygorii Strashko 
Cc: 
Cc: Sekhar Nori 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Russell King

ARM: 8739/1: NOMMU: Setup VBAR/Hivecs for secondaries cores

2018-01-21T15:32:23+00:00

With switch to dynamic exception base address setting, VBAR/Hivecs
set only for boot CPU, but secondaries stay unaware of that. That
might lead to weird effects when trying up to bring up secondaries.

Fixes: ad475117d201 ("ARM: 8649/2: nommu: remove Hivecs configuration is asm")
Signed-off-by: Vladimir Murzin 
Acked-by: afzal mohammed 
Signed-off-by: Russell King

ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C

2017-10-23T15:58:59+00:00

Currently, there are several issues with how MPU is setup:

 1. We won't boot if MPU is missing
 2. We won't boot if use XIP
 3. Further extension of MPU setup requires asm skills

The 1st point can be relaxed, so we can continue with boot CPU even if
MPU is missed and fail boot for secondaries only. To address the 2nd
point we could create region covering CONFIG_XIP_PHYS_ADDR - _end and
that might work for the first stage of MPU enable, but due to MPU's
alignment requirement we could cover too much, IOW we need more
flexibility in how we're partitioning memory regions... and it'd be
hardly possible to archive because of the 3rd point.

This patch is trying to address 1st and 3rd issues and paves the path
for 2nd and further improvements.

The most visible change introduced with this patch is that we start
using mpu_rgn_info array (as it was supposed?), so change in MPU setup
done by boot CPU is recorded there and feed to secondaries. It
allows us to keep minimal region setup for boot CPU and do the rest in
C. Since we start programming MPU regions in C evaluation of MPU
constrains (number of regions supported and minimal region order) can
be done once, which in turn open possibility to free-up "probe"
region early.

Tested-by: Szemző András 
Tested-by: Alexandre TORGUE 
Tested-by: Benjamin Gaignard 
Signed-off-by: Vladimir Murzin 
Signed-off-by: Russell King

arm: Adjust system_state check

2017-05-23T08:01:35+00:00

To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.

Adjust the system_state check in ipi_cpu_stop() to handle the extra states.

Signed-off-by: Thomas Gleixner 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Greg Kroah-Hartman 
Cc: Linus Torvalds 
Cc: Mark Rutland 
Cc: Peter Zijlstra 
Cc: Russell King 
Cc: Steven Rostedt 
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170516184735.020718977@linutronix.de
Signed-off-by: Ingo Molnar

sched/headers: Move task->mm handling methods to

2017-03-03T00:43:28+00:00

Move the following task->mm helper APIs into a new header file,
, to further reduce the size and complexity
of .

Here are how the APIs are used in various kernel files:

  # mm_alloc():
  arch/arm/mach-rpc/ecard.c
  fs/exec.c
  include/linux/sched/mm.h
  kernel/fork.c

  # __mmdrop():
  arch/arc/include/asm/mmu_context.h
  include/linux/sched/mm.h
  kernel/fork.c

  # mmdrop():
  arch/arm/mach-rpc/ecard.c
  arch/m68k/sun3/mmu_emu.c
  arch/x86/mm/tlb.c
  drivers/gpu/drm/amd/amdkfd/kfd_process.c
  drivers/gpu/drm/i915/i915_gem_userptr.c
  drivers/infiniband/hw/hfi1/file_ops.c
  drivers/vfio/vfio_iommu_spapr_tce.c
  fs/exec.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  fs/proc/task_nommu.c
  fs/userfaultfd.c
  include/linux/mmu_notifier.h
  include/linux/sched/mm.h
  kernel/fork.c
  kernel/futex.c
  kernel/sched/core.c
  mm/khugepaged.c
  mm/ksm.c
  mm/mmu_context.c
  mm/mmu_notifier.c
  mm/oom_kill.c
  virt/kvm/kvm_main.c

  # mmdrop_async_fn():
  include/linux/sched/mm.h

  # mmdrop_async():
  include/linux/sched/mm.h
  kernel/fork.c

  # mmget_not_zero():
  fs/userfaultfd.c
  include/linux/sched/mm.h
  mm/oom_kill.c

  # mmput():
  arch/arc/include/asm/mmu_context.h
  arch/arc/kernel/troubleshoot.c
  arch/frv/mm/mmu-context.c
  arch/powerpc/platforms/cell/spufs/context.c
  arch/sparc/include/asm/mmu_context_32.h
  drivers/android/binder.c
  drivers/gpu/drm/etnaviv/etnaviv_gem.c
  drivers/gpu/drm/i915/i915_gem_userptr.c
  drivers/infiniband/core/umem.c
  drivers/infiniband/core/umem_odp.c
  drivers/infiniband/core/uverbs_main.c
  drivers/infiniband/hw/mlx4/main.c
  drivers/infiniband/hw/mlx5/main.c
  drivers/infiniband/hw/usnic/usnic_uiom.c
  drivers/iommu/amd_iommu_v2.c
  drivers/iommu/intel-svm.c
  drivers/lguest/lguest_user.c
  drivers/misc/cxl/fault.c
  drivers/misc/mic/scif/scif_rma.c
  drivers/oprofile/buffer_sync.c
  drivers/vfio/vfio_iommu_type1.c
  drivers/vhost/vhost.c
  drivers/xen/gntdev.c
  fs/exec.c
  fs/proc/array.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  fs/proc/task_nommu.c
  fs/userfaultfd.c
  include/linux/sched/mm.h
  kernel/cpuset.c
  kernel/events/core.c
  kernel/events/uprobes.c
  kernel/exit.c
  kernel/fork.c
  kernel/ptrace.c
  kernel/sys.c
  kernel/trace/trace_output.c
  kernel/tsacct.c
  mm/memcontrol.c
  mm/memory.c
  mm/mempolicy.c
  mm/migrate.c
  mm/mmu_notifier.c
  mm/nommu.c
  mm/oom_kill.c
  mm/process_vm_access.c
  mm/rmap.c
  mm/swapfile.c
  mm/util.c
  virt/kvm/async_pf.c

  # mmput_async():
  include/linux/sched/mm.h
  kernel/fork.c
  mm/oom_kill.c

  # get_task_mm():
  arch/arc/kernel/troubleshoot.c
  arch/powerpc/platforms/cell/spufs/context.c
  drivers/android/binder.c
  drivers/gpu/drm/etnaviv/etnaviv_gem.c
  drivers/infiniband/core/umem.c
  drivers/infiniband/core/umem_odp.c
  drivers/infiniband/hw/mlx4/main.c
  drivers/infiniband/hw/mlx5/main.c
  drivers/infiniband/hw/usnic/usnic_uiom.c
  drivers/iommu/amd_iommu_v2.c
  drivers/iommu/intel-svm.c
  drivers/lguest/lguest_user.c
  drivers/misc/cxl/fault.c
  drivers/misc/mic/scif/scif_rma.c
  drivers/oprofile/buffer_sync.c
  drivers/vfio/vfio_iommu_type1.c
  drivers/vhost/vhost.c
  drivers/xen/gntdev.c
  fs/proc/array.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  include/linux/sched/mm.h
  kernel/cpuset.c
  kernel/events/core.c
  kernel/exit.c
  kernel/fork.c
  kernel/ptrace.c
  kernel/sys.c
  kernel/trace/trace_output.c
  kernel/tsacct.c
  mm/memcontrol.c
  mm/memory.c
  mm/mempolicy.c
  mm/migrate.c
  mm/mmu_notifier.c
  mm/nommu.c
  mm/util.c

  # mm_access():
  fs/proc/base.c
  include/linux/sched/mm.h
  kernel/fork.c
  mm/process_vm_access.c

  # mm_release():
  arch/arc/include/asm/mmu_context.h
  fs/exec.c
  include/linux/sched/mm.h
  include/uapi/linux/sched.h
  kernel/exit.c
  kernel/fork.c

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:36+00:00

We are going to split  out of , which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder  file that just
maps to  to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar