linux.git/arch/arm/kernel/setup.c, branch v2.6.39 Linux kernel source tree Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm 2011-03-24T03:37:26+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-03-24T03:37:26+00:00 2f284c846331fa44be1300a3c2c3e85800268a00 * 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (35 commits) ARM: Update (and cut down) mach-types ARM: 6771/1: vexpress: add support for multiple core tiles ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime ARM: pgtable: add pud-level code ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks ARM: Use long long format when printing meminfo physical addresses ARM: integrator: add Integrator/CP sched_clock support ARM: realview/vexpress: consolidate SMP bringup code ARM: realview/vexpress: consolidate localtimer support ARM: integrator/versatile: consolidate FPGA IRQ handling code ARM: rationalize versatile family Kconfig/Makefile ARM: realview: remove old AMBA device DMA definitions ARM: versatile: remove old AMBA device DMA definitions ARM: vexpress: use new init_early for clock tree and sched_clock init ARM: realview: use new init_early for clock tree and sched_clock init ARM: versatile: use new init_early for clock tree and sched_clock init ARM: integrator: use new init_early for clock tree init ... 
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (35 commits)
  ARM: Update (and cut down) mach-types
  ARM: 6771/1: vexpress: add support for multiple core tiles
  ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings
  ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig
  ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception
  ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime
  ARM: pgtable: add pud-level code
  ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks
  ARM: Use long long format when printing meminfo physical addresses
  ARM: integrator: add Integrator/CP sched_clock support
  ARM: realview/vexpress: consolidate SMP bringup code
  ARM: realview/vexpress: consolidate localtimer support
  ARM: integrator/versatile: consolidate FPGA IRQ handling code
  ARM: rationalize versatile family Kconfig/Makefile
  ARM: realview: remove old AMBA device DMA definitions
  ARM: versatile: remove old AMBA device DMA definitions
  ARM: vexpress: use new init_early for clock tree and sched_clock init
  ARM: realview: use new init_early for clock tree and sched_clock init
  ARM: versatile: use new init_early for clock tree and sched_clock init
  ARM: integrator: use new init_early for clock tree init
  ...
crash_dump: export is_kdump_kernel to modules, consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn 2011-03-24T02:47:19+00:00 Olaf Hering olaf@aepfle.de 2011-03-23T23:43:29+00:00 93a72052be81823fa1584b9be037d51924f9efa4 The Xen PV drivers in a crashed HVM guest can not connect to the dom0 backend drivers because both frontend and backend drivers are still in connected state. To run the connection reset function only in case of a crashdump, the is_kdump_kernel() function needs to be available for the PV driver modules. Consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn into kernel/crash_dump.c Also export elfcorehdr_addr to make is_kdump_kernel() usable for modules. Leave 'elfcorehdr' as early_param(). This changes powerpc from __setup() to early_param(). It adds an address range check from x86 also on ia64 and powerpc. [akpm@linux-foundation.org: additional #includes] [akpm@linux-foundation.org: remove elfcorehdr_addr export] [akpm@linux-foundation.org: fix for Tejun's mm/nobootmem.c changes] Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
The Xen PV drivers in a crashed HVM guest can not connect to the dom0
backend drivers because both frontend and backend drivers are still in
connected state.  To run the connection reset function only in case of a
crashdump, the is_kdump_kernel() function needs to be available for the PV
driver modules.

Consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn into
kernel/crash_dump.c Also export elfcorehdr_addr to make is_kdump_kernel()
usable for modules.

Leave 'elfcorehdr' as early_param().  This changes powerpc from __setup()
to early_param().  It adds an address range check from x86 also on ia64
and powerpc.

[akpm@linux-foundation.org: additional #includes]
[akpm@linux-foundation.org: remove elfcorehdr_addr export]
[akpm@linux-foundation.org: fix for Tejun's mm/nobootmem.c changes]
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branches 'fixes', 'pgt-next' and 'versatile' into devel 2011-03-20T09:32:12+00:00 Russell King rmk+kernel@arm.linux.org.uk 2011-03-20T09:32:12+00:00 196f020fbbb83d246960548e73a40fd08f3e7866 






Merge branch 'p2v' into devel
2011-03-16T23:35:27+00:00

Russell King
rmk+kernel@arm.linux.org.uk

2011-03-16T23:35:27+00:00

05e34754518b6a90d5c392790c032575fab12d66

Conflicts:
	arch/arm/kernel/module.c
	arch/arm/mach-s5pv210/sleep.S





Conflicts:
	arch/arm/kernel/module.c
	arch/arm/mach-s5pv210/sleep.S







Merge branch 'misc' into devel
2011-03-16T23:35:25+00:00

Russell King
rmk+kernel@arm.linux.org.uk

2011-03-16T23:35:25+00:00

1f0090a1eaa1b750a2fc5c99c91b790d5322a1fd

Conflicts:
	arch/arm/Kconfig





Conflicts:
	arch/arm/Kconfig







ARM: 6748/1: ignore mdesc->boot_params if out of range
2011-02-23T16:14:25+00:00

Nicolas Pitre
nicolas.pitre@linaro.org

2011-02-21T05:57:33+00:00

3572bea8cbc57f0bef1e0f4580c01717df7026d8

The initial MMU table created in head.S contains a 1 MB mapping at the
start of memory to let the early kernel boot code access the boot params
specified by mdesc->boot_params.

When using CONFIG_ARM_PATCH_PHYS_VIRT it is possible for the kernel to
have a different idea of where the start of memory is at run time, making
the compile-time determined mdesc->boot_params pointing to a memory area
which is not mapped.  Any access to the boot params in that case will
fault and silently hang the kernel at that point.  It is therefore a
better idea to simply ignore mdesc->boot_params in that case and give
the kernel a chance to print some diagnostic on the console later.

If the bootloader provides a valid pointer in r2 to the kernel then this
is used instead of mdesc->boot_params, and an explicit mapping is already
created in the initial MMU table for it.  It is therefore a good idea to
use that facility when using a relocated kernel.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>





The initial MMU table created in head.S contains a 1 MB mapping at the
start of memory to let the early kernel boot code access the boot params
specified by mdesc->boot_params.

When using CONFIG_ARM_PATCH_PHYS_VIRT it is possible for the kernel to
have a different idea of where the start of memory is at run time, making
the compile-time determined mdesc->boot_params pointing to a memory area
which is not mapped.  Any access to the boot params in that case will
fault and silently hang the kernel at that point.  It is therefore a
better idea to simply ignore mdesc->boot_params in that case and give
the kernel a chance to print some diagnostic on the console later.

If the bootloader provides a valid pointer in r2 to the kernel then this
is used instead of mdesc->boot_params, and an explicit mapping is already
created in the initial MMU table for it.  It is therefore a good idea to
use that facility when using a relocated kernel.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>







ARM: 6749/1: fold lookup_machine_type() into setup_machine()
2011-02-23T16:13:17+00:00

Nicolas Pitre
nicolas.pitre@linaro.org

2011-02-21T06:00:32+00:00

dce72dd08c976c9e5e1367bf994b306b15ae87fe

Since commit 6fc31d54 there is no callers for lookup_machine_type()
other than setup_machine(). And if the former fails it won't return,
therefore the error path in the later is dead code.  Let's clean
things up by merging them together.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>





Since commit 6fc31d54 there is no callers for lookup_machine_type()
other than setup_machine(). And if the former fails it won't return,
therefore the error path in the later is dead code.  Let's clean
things up by merging them together.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>







ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks
2011-02-21T19:24:13+00:00

Will Deacon
will.deacon@arm.com

2011-02-15T11:44:10+00:00

f60892d3e36dcdd0d9f30db05beae7a446a93f28

The unsigned long datatype is not sufficient for mapping physical addresses
>= 4GB.

This patch ensures that the phys_addr_t datatype is used to represent
the start address of a membank, which may reside above the 4GB boundary.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>





The unsigned long datatype is not sufficient for mapping physical addresses
>= 4GB.

This patch ensures that the phys_addr_t datatype is used to represent
the start address of a membank, which may reside above the 4GB boundary.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>







ARM: 6676/1: Correct the cpu_architecture() function for ARMv7
2011-02-19T11:24:28+00:00

Catalin Marinas
catalin.marinas@arm.com

2011-02-15T17:06:57+00:00

315cfe7835c9a3fe27f15519bdeee8bf0a293e33

If ID_MMFR0[3:0] >= 3, the architecture version is ARMv7. The code was
currently only testing for ID_MMFR0[3:0] == 3.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>





If ID_MMFR0[3:0] >= 3, the architecture version is ARMv7. The code was
currently only testing for ID_MMFR0[3:0] == 3.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>







ARM: P2V: avoid initializers and assembly using PHYS_OFFSET
2011-02-17T23:27:30+00:00

Russell King
rmk+kernel@arm.linux.org.uk

2011-01-04T19:03:16+00:00

b75c178afaa975896e894bb2b6951dc4cd43c977

As PHYS_OFFSET will be becoming a variable, we can't have it used in
initializers nor assembly code.  Replace those in generic code with
a run-time initialization.  Replace those in platform code using the
individual platform specific PLAT_PHYS_OFFSET.

Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>





As PHYS_OFFSET will be becoming a variable, we can't have it used in
initializers nor assembly code.  Replace those in generic code with
a run-time initialization.  Replace those in platform code using the
individual platform specific PLAT_PHYS_OFFSET.

Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>