linux.git/arch/arm/include/debug, branch v3.17 Linux kernel source tree Merge tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2014-08-08T18:14:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2014-08-08T18:14:29+00:00 b3345d7c57d70e6cb6749af25cdbe80515582e99 Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ... 
Pull ARM SoC platform changes from Olof Johansson:
 "This is the bulk of new SoC enablement and other platform changes for
  3.17:

   - Samsung S5PV210 has been converted to DT and multiplatform
   - Clock drivers and bindings for some of the lower-end i.MX 1/2
     platforms
   - Kirkwood, one of the popular Marvell platforms, is folded into the
     mvebu platform code, removing mach-kirkwood
   - Hwmod data for TI AM43xx and DRA7 platforms
   - More additions of Renesas shmobile platform support
   - Removal of plat-samsung contents that can be removed with S5PV210
     being multiplatform/DT-enabled and the other two old platforms
     being removed

  New platforms (most with only basic support right now):

   - Hisilicon X5HD2 settop box chipset is introduced
   - Mediatek MT6589 (mobile chipset) is introduced
   - Broadcom BCM7xxx settop box chipset is introduced

  + as usual a lot other pieces all over the platform code"

* tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits)
  ARM: hisi: remove smp from machine descriptor
  power: reset: move hisilicon reboot code
  ARM: dts: Add hix5hd2-dkb dts file.
  ARM: debug: Rename Hi3716 to HIX5HD2
  ARM: hisi: enable hix5hd2 SoC
  ARM: hisi: add ARCH_HISI
  MAINTAINERS: add entry for Broadcom ARM STB architecture
  ARM: brcmstb: select GISB arbiter and interrupt drivers
  ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
  ARM: configs: enable SMP in bcm_defconfig
  ARM: add SMP support for Broadcom mobile SoCs
  Documentation: arm: misc updates to Marvell EBU SoC status
  Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
  ARM: mvebu: fix build without platforms selected
  ARM: mvebu: add cpuidle support for Armada 38x
  ARM: mvebu: add cpuidle support for Armada 370
  cpuidle: mvebu: add Armada 38x support
  cpuidle: mvebu: add Armada 370 support
  cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7
  ARM: mvebu: export the SCU address
  ...
ARM: S5PV210: move debug-macro.S into the common space 2014-07-18T19:32:12+00:00 Tomasz Figa t.figa@samsung.com 2014-07-03T12:39:41+00:00 7bab7d9e114e6e908675aa185aaeaa162cc384ea Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 
Move debug-macro.S from mach/include to include/debug where
all other common debug macros are.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
ARM: clps711x: Move debug include into arch/arm/include/debug/ 2014-07-06T23:52:05+00:00 Alexander Shiyan shc_work@mail.ru 2014-06-19T15:26:34+00:00 dd99eef5f6472e30b6e13f6f4622f58e94d46809 One more step to allowing CLPS711X to participate in the multi-platform defconfig. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Olof Johansson <olof@lixom.net> 
One more step to allowing CLPS711X to participate in the
multi-platform defconfig.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'samsung-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc 2014-05-31T04:44:49+00:00 Olof Johansson olof@lixom.net 2014-05-31T04:44:32+00:00 fe388fac0f18010688032393d042807261791eaf Samsung Exynos updates for 3.16 - add new SoCs support : exynos3250, 5260, 5410 and 5800 - enable multi-platform on exynos : consolidate exynos related Kconfig entries * tag 'samsung-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (22 commits) ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC cpufreq: exynos: Fix the compile error ARM: S3C24XX: move debug-macro.S into the common space ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro ARM: S3C24XX: trim down debug uart handling ARM: compressed/head.S: remove s3c24xx special case ARM: EXYNOS: Remove unnecessary inclusion of cpu.h ARM: EXYNOS: Migrate Exynos specific macros from plat to mach ARM: EXYNOS: Remove exynos_subsys registration ARM: EXYNOS: Remove duplicate lines in Makefile ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling ARM: dts: Remove g2d_pd node for exynos5420 ARM: dts: Remove mau_pd node for exynos5420 ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount ... Signed-off-by: Olof Johansson <olof@lixom.net> 
Samsung Exynos updates for 3.16

- add new SoCs support
  : exynos3250, 5260, 5410 and 5800

- enable multi-platform on exynos
  : consolidate exynos related Kconfig entries

* tag 'samsung-exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (22 commits)
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  cpufreq: exynos: Fix the compile error
  ARM: S3C24XX: move debug-macro.S into the common space
  ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
  ARM: S3C24XX: trim down debug uart handling
  ARM: compressed/head.S: remove s3c24xx special case
  ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
  ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
  ARM: EXYNOS: Remove exynos_subsys registration
  ARM: EXYNOS: Remove duplicate lines in Makefile
  ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
  ARM: dts: Remove g2d_pd node for exynos5420
  ARM: dts: Remove mau_pd node for exynos5420
  ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'zynq-cleanup-for-3.16' of git://git.xilinx.com/linux-xlnx into next/soc 2014-05-26T21:52:23+00:00 Olof Johansson olof@lixom.net 2014-05-26T21:52:23+00:00 4fd09120443a47ea1876ecce494205420b94d201 Merge "Xilinx Zynq changes for v3.16" from Michal Simek: arm: Xilinx Zynq cleanup patches for v3.16 - Add support for BIG Endian - Add SOC_BUS support - Sort Kconfig options - Fix early console * tag 'zynq-cleanup-for-3.16' of git://git.xilinx.com/linux-xlnx: ARM: zynq: Enable big-endian ARM: zynq: Fix uart0 early console virtual address clocksource: cadence_ttc: Use readl/writel_relaxed instead of __raw ARM: zynq: Sort Kconfig options ARM: zynq: Add support for SOC_BUS Signed-off-by: Olof Johansson <olof@lixom.net> 
Merge "Xilinx Zynq changes for v3.16" from Michal Simek:

arm: Xilinx Zynq cleanup patches for v3.16

- Add support for BIG Endian
- Add SOC_BUS support
- Sort Kconfig options
- Fix early console

* tag 'zynq-cleanup-for-3.16' of git://git.xilinx.com/linux-xlnx:
  ARM: zynq: Enable big-endian
  ARM: zynq: Fix uart0 early console virtual address
  clocksource: cadence_ttc: Use readl/writel_relaxed instead of __raw
  ARM: zynq: Sort Kconfig options
  ARM: zynq: Add support for SOC_BUS

Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: S3C24XX: move debug-macro.S into the common space 2014-05-25T19:05:00+00:00 Heiko Stuebner heiko@sntech.de 2014-05-15T21:59:18+00:00 2cd62bd4e5226ae5fa61f58ade8148f2e4643335 Move debug-macro.S from mach/include to include/debug where all other common debug macros are. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 
Move debug-macro.S from mach/include to include/debug where
all other common debug macros are.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Merge tag 'qcom-soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/soc 2014-05-23T19:56:57+00:00 Arnd Bergmann arnd@arndb.de 2014-05-23T19:32:29+00:00 8ad0bbd8696904c34a1fb266a25efe2be818c0c7 Merge "Qualcomm ARM Based SoC Updates for v3.16" from Kumar Gala: * Enabling building pinctrl and AMBA bus support * Clean up debug UART selection * tag 'qcom-soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: qcom: Select PINCTRL by default for ARCH_QCOM ARM: debug: qcom: make UART address selection configuration option ARM: qcom: Enable ARM_AMBA option for Qualcomm SOCs. Conflicts: arch/arm/Kconfig.debug arch/arm/mach-qcom/Kconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Merge "Qualcomm ARM Based SoC Updates for v3.16" from Kumar Gala:

* Enabling building pinctrl and AMBA bus support
* Clean up debug UART selection

* tag 'qcom-soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  ARM: qcom: Select PINCTRL by default for ARCH_QCOM
  ARM: debug: qcom: make UART address selection configuration option
  ARM: qcom: Enable ARM_AMBA option for Qualcomm SOCs.

Conflicts:
	arch/arm/Kconfig.debug
	arch/arm/mach-qcom/Kconfig

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: debug: qcom: make UART address selection configuration option 2014-05-22T16:50:15+00:00 Ivan T. Ivanov iivanov@mm-sol.com 2014-04-14T13:47:34+00:00 7098cff2a3f4db5f844607b8a09bd191618c769e Separate Qualcomm low-level debugging UART to two options. DEBUG_MSM_UART is used in earlier non-multi platform arches, like MSM7X00A, QSD8X50 and MSM7X30. DEBUG_QCOM_UARTDM is used in multi-plafrom arches and have embedded data mover. Make DEBUG_UART_PHYS and DEBUG_UART_BASE user adjustable by Kconfig menu. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> 
Separate Qualcomm low-level debugging UART to two options.

DEBUG_MSM_UART is used in earlier non-multi platform arches,
like MSM7X00A, QSD8X50 and MSM7X30.

DEBUG_QCOM_UARTDM is used in multi-plafrom arches and have
embedded data mover.

Make DEBUG_UART_PHYS and DEBUG_UART_BASE user adjustable by
Kconfig menu.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
ARM: zynq: Enable big-endian 2014-05-20T14:17:13+00:00 Michal Simek michal.simek@xilinx.com 2014-04-11T13:05:56+00:00 eb28d0bb857f01ff972f8b359c962eef9ecf1b64 Enable ARCH_SUPPORTS_BIG_ENDIAN in Kconfig. zynq_secondary_trampoline is the first function that is called on secondary CPU. Reference: "ARM: mcpm: fix big endian issue in mcpm startup code" (sha1: 519ceb9fd10cd7e836d0aa97b2068cc9e97f463b) Fix early printk support. Based on: "ARM: pl01x debug code endian fix" (sha1: 76e3faf156fa95b6465e747d702b94faf67117fc) Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Enable ARCH_SUPPORTS_BIG_ENDIAN in Kconfig.

zynq_secondary_trampoline is the first function
that is called on secondary CPU.
Reference:
"ARM: mcpm: fix big endian issue in mcpm startup code"
(sha1: 519ceb9fd10cd7e836d0aa97b2068cc9e97f463b)

Fix early printk support. Based on:
"ARM: pl01x debug code endian fix"
(sha1: 76e3faf156fa95b6465e747d702b94faf67117fc)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
ARM: zynq: Fix uart0 early console virtual address 2014-05-20T14:17:06+00:00 Michal Simek michal.simek@xilinx.com 2014-05-14T14:46:00+00:00 90a6695a2ac1b9db8e0f4bfec3156c22a722d9ba Virtual address have to have the same offset within a 2MB aligned section of virtual/phycial address space. Fix uart0 virtual address to be align with physical one. Also remove UART_SIZE which is completely unused. Reported-by: Russ Smith <russells@google.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Virtual address have to have the same offset within
a 2MB aligned section of virtual/phycial address space.

Fix uart0 virtual address to be align with physical one.
Also remove UART_SIZE which is completely unused.

Reported-by: Russ Smith <russells@google.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>