ARM processors with LPAE enabled use 3 levels of page tables, with an
entry in the top level (pgd) covering 1GB of virtual space.  Because of
the branch relocation limitations on ARM, the loadable modules are
mapped 16MB below PAGE_OFFSET, making the corresponding 1GB pgd shared
between kernel modules and user space.

If free_pgtables() is called with the default ceiling 0,
free_pgd_range() (and subsequently called functions) also frees the page
table shared between user space and kernel modules (which is normally
handled by the ARM-specific pgd_free() function).  This patch changes
defines the ARM USER_PGTABLES_CEILING to TASK_SIZE when CONFIG_ARM_LPAE
is enabled.

Note that the pgd_free() function already checks the presence of the
shared pmd page allocated by pgd_alloc() and frees it, though with
ceiling 0 this wasn't necessary.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>	[3.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Following commit 26ffd0d4 (ARM: mm: introduce present, faulting entries
for PAGE_NONE), if a page has been mapped as PROT_NONE, the L_PTE_VALID
bit is cleared by the set_pte_ext() code. With LPAE the software and
hardware pte share the same location and subsequent modifications of pte
range (change_protection()) will leave the L_PTE_VALID bit cleared.

This patch adds the L_PTE_VALID bit to the newprot mask in pte_modify().

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Subash Patel <subash.rp@samsung.com>
Tested-by: Subash Patel <subash.rp@samsung.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 3.8.x
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

KVM uses the stage-2 page tables and the Hyp page table format,
so we define the fields and page protection flags needed by KVM.

The nomenclature is this:
 - page_hyp:        PL2 code/data mappings
 - page_hyp_device: PL2 device mappings (vgic access)
 - page_s2:         Stage-2 code/data page mappings
 - page_s2_device:  Stage-2 device mappings (vgic access)

Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Christoffer Dall <c.dall@virtualopensystems.com>

PROT_NONE mappings apply the page protection attributes defined by _P000
which translate to PAGE_NONE for ARM. These attributes specify an XN,
RDONLY pte that is inaccessible to userspace. However, on kernels
configured without support for domains, such a pte *is* accessible to
the kernel and can be read via get_user, allowing tasks to read
PROT_NONE pages via syscalls such as read/write over a pipe.

This patch introduces a new software pte flag, L_PTE_NONE, that is set
to identify faulting, present entries.

Signed-off-by: Will Deacon <will.deacon@arm.com>

For long-descriptor translation table formats, the ARMv7 architecture
defines the last two bits of the second- and third-level descriptors to
be:

	x0b	- Invalid
	01b	- Block (second-level), Reserved (third-level)
	11b	- Table (second-level), Page (third-level)

This allows us to define L_PTE_PRESENT as (3 << 0) and use this value to
create ptes directly. However, when determining whether a given pte
value is present in the low-level page table accessors, we only need to
check the least significant bit of the descriptor, allowing us to write
faulting, present entries which are required for PROT_NONE mappings.

This patch introduces L_PTE_VALID, which can be used to test whether a
pte should fault, and updates the low-level page table accessors
accordingly.

Signed-off-by: Will Deacon <will.deacon@arm.com>

Convert #include "..." to #include <path/...> in kernel system headers.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>

Page migration encodes the pfn in the offset field of a swp_entry_t.
For LPAE, we support physical addresses of up to 36 bits (due to
sparsemem limitations with the size of page flags), requiring 24 bits
to represent a pfn. A further 3 bits are used to encode a swp_entry into
a pte, leaving 5 bits for the type field. Furthermore, the core code
defines MAX_SWAPFILES_SHIFT as 5, so the additional type bit does not
get used.

This patch reduces the width of the type field to 5 bits, allowing us
to create up to 31 swapfiles of 64GB each.

Cc: <stable@vger.kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Swap entries are encoding in ptes such that !pte_present(pte) and
pte_file(pte). The remaining bits of the descriptor are used to identify
the swapfile and offset within it to the swap entry.

When writing such a pte for a user virtual address, set_pte_at
unconditionally sets the nG bit, which (in the case of LPAE) will
corrupt the swapfile offset and lead to a BUG:

[  140.494067] swap_free: Unused swap offset entry 000763b4
[  140.509989] BUG: Bad page map in process rs:main Q:Reg  pte:0ec76800 pmd:8f92e003

This patch fixes the problem by only setting the nG bit for user
mappings that are actually present.

Cc: <stable@vger.kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Conflicts:
	arch/arm/kernel/setup.c
	arch/arm/mach-shmobile/board-kota2.c