Based on the normalized pattern:

    this file is licensed under the terms of the gnu general public
    license version 2 this program is licensed as is without any warranty
    of any kind whether express or implied

extracted by the scancode license scanner the SPDX license identifier

    GPL-2.0-only

has been chosen to replace the boilerplate/reference.

Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sa1111.h header defines some constants using the bitfield
macros, but those are only used on sa1100, not on pxa, and the
users include the bitfield header through mach/hardware.h.

Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This is one of the last platforms using the old entry path.
While this code path is spread over a few files, it is fairly
straightforward to convert it into an equivalent C version,
leaving the existing algorithm and all the priority handling
the same.

Unlike most irqchip drivers, this means reading the status
register(s) in a loop and always handling the highest-priority
irq first.

The IOMD_IRQREQC and IOMD_IRQREQD registers are not actaully
used here, but I left the code in place for the time being,
to keep the conversion as direct as possible. It could be
removed in a cleanup on top.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: drop obsolete IOMD_IRQREQC/IOMD_IRQREQD handling]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M

IOMD_IRQREQC nor IOMD_IRQREQD are ever defined, so any conditionally
compiled code that depends on them is dead code, and can be removed.

Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>

The driver core ignores the return value of struct bus_type::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct locomo_driver::remove return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea and ensures future
users behave accordingly.

Link: https://lore.kernel.org/r/20201126110140.2021758-1-u.kleine-koenig@pengutronix.de

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The driver core ignores the return value of struct device_driver::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct sa1111_driver::remove return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea and ensures future
users behave accordingly.

Link: https://lore.kernel.org/r/20201126114724.2028511-1-u.kleine-koenig@pengutronix.de
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The it8152 PCI host controller was only used by cm-x2xx platforms.
Since these platforms were removed, there is no point to keep it8152
driver.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The PL310 also has a "Force write allocate" bits in the Auxiliary
Control Register.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

Pull ARM updates from Russell King:

 - fix various clang build and cppcheck issues

 - switch ARM to use new common outgoing-CPU-notification code

 - add some additional explanation about the boot code

 - kbuild "make clean" fixes

 - get rid of another "(____ptrval____)", this time for the VDSO code

 - avoid treating cache maintenance faults as a write

 - add a frame pointer unwinder implementation for clang

 - add EDAC support for Aurora L2 cache

 - improve robustness of adjust_lowmem_bounds() finding the bounds of
   lowmem.

 - add reset control for AMBA primecell devices

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits)
  ARM: 8906/1: drivers/amba: add reset control to amba bus probe
  ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer
  ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary
  ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address
  ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs
  ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC
  ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper
  ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora
  ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding
  ARM: 8886/1: l2x0: support parity-enable/disable on aurora
  ARM: 8885/1: aurora-l2: add defines for parity and ECC registers
  ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE
  ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware
  ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang
  ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes
  ARM: 8896/1: VDSO: Don't leak kernel addresses
  ARM: 8895/1: visit mach-* and plat-* directories when cleaning
  ARM: 8894/1: boot: Replace open-coded nop with macro
  ARM: 8893/1: boot: Explain the 8 nops
  ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE
  ...

These defines will be used by subsequent patches to add support for the
parity check and error correction functionality in the Aurora L2 cache
controller.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>