ARMv7 has MOVW/MOVT instruction pairs to load symbol addresses into registers without having to rely on literal loads that go via the D-cache. For older cores, we now support a similar arrangement, based on PC-relative group relocations. This means we can elide most literal loads entirely from the entry path, by switching to the ldr_va macro to emit the appropriate sequence depending on the target architecture revision. While at it, switch to the bl_r macro for invoking the right PABT/DABT helpers instead of setting the LR register explicitly, which does not play well with cores that speculate across function returns. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
When CONFIG_SMP is not defined, the CPU offset is always zero, and so we can simplify the sequence to load a per-CPU variable. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Pull ARM updates from Russell King:
"Updates for IRQ stacks and virtually mapped stack support, and ftrace:
- Support for IRQ and vmap'ed stacks
This covers all the work related to implementing IRQ stacks and
vmap'ed stacks for all 32-bit ARM systems that are currently
supported by the Linux kernel, including RiscPC and Footbridge. It
has been submitted for review in four different waves:
- IRQ stacks support for v7 SMP systems [0]
- vmap'ed stacks support for v7 SMP systems[1]
- extending support for both IRQ stacks and vmap'ed stacks for all
remaining configurations, including v6/v7 SMP multiplatform
kernels and uniprocessor configurations including v7-M [2]
- fixes and updates in [3]
- ftrace fixes and cleanups
Make all flavors of ftrace available on all builds, regardless of
ISA choice, unwinder choice or compiler [4]:
- use ADD not POP where possible
- fix a couple of Thumb2 related issues
- enable HAVE_FUNCTION_GRAPH_FP_TEST for robustness
- enable the graph tracer with the EABI unwinder
- avoid clobbering frame pointer registers to make Clang happy
- Fixes for the above"
[0] https://lore.kernel.org/linux-arm-kernel/20211115084732.3704393-1-ardb@kernel.org/
[1] https://lore.kernel.org/linux-arm-kernel/20211122092816.2865873-1-ardb@kernel.org/
[2] https://lore.kernel.org/linux-arm-kernel/20211206164659.1495084-1-ardb@kernel.org/
[3] https://lore.kernel.org/linux-arm-kernel/20220124174744.1054712-1-ardb@kernel.org/
[4] https://lore.kernel.org/linux-arm-kernel/20220203082204.1176734-1-ardb@kernel.org/
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (62 commits)
ARM: fix building NOMMU ARMv4/v5 kernels
ARM: unwind: only permit stack switch when unwinding call_with_stack()
ARM: Revert "unwind: dump exception stack from calling frame"
ARM: entry: fix unwinder problems caused by IRQ stacks
ARM: unwind: set frame.pc correctly for current-thread unwinding
ARM: 9184/1: return_address: disable again for CONFIG_ARM_UNWIND=y
ARM: 9183/1: unwind: avoid spurious warnings on bogus code addresses
Revert "ARM: 9144/1: forbid ftrace with clang and thumb2_kernel"
ARM: mach-bcm: disable ftrace in SMC invocation routines
ARM: cacheflush: avoid clobbering the frame pointer
ARM: kprobes: treat R7 as the frame pointer register in Thumb2 builds
ARM: ftrace: enable the graph tracer with the EABI unwinder
ARM: unwind: track location of LR value in stack frame
ARM: ftrace: enable HAVE_FUNCTION_GRAPH_FP_TEST
ARM: ftrace: avoid unnecessary literal loads
ARM: ftrace: avoid redundant loads or clobbering IP
ARM: ftrace: use trampolines to keep .init.text in branching range
ARM: ftrace: use ADD not POP to counter PUSH at entry
ARM: ftrace: ensure that ADR takes the Thumb bit into account
ARM: make get_current() and __my_cpu_offset() __always_inline
...
In the recent Spectre BHB patches, there was a typo that is only
exposed in certain configurations: mcr p15,0,XX,c7,r5,4 should have
been mcr p15,0,XX,c7,c5,4
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ARM spectre fixes from Russell King: "ARM Spectre BHB mitigations. These patches add Spectre BHB migitations for the following Arm CPUs to the 32-bit ARM kernels: - Cortex A15 - Cortex A57 - Cortex A72 - Cortex A73 - Cortex A75 - Brahma B15 for CVE-2022-23960" * tag 'for-linus-bhb' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: include unprivileged BPF status in Spectre V2 reporting ARM: Spectre-BHB workaround ARM: use LOADADDR() to get load address of sections ARM: early traps initialisation ARM: report Spectre v2 status through sysfs
Workaround the Spectre BHB issues for Cortex-A15, Cortex-A57, Cortex-A72, Cortex-A73 and Cortex-A75. We also include Brahma B15 as well to be safe, which is affected by Spectre V2 in the same ways as Cortex-A15. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Nathan reports the group relocations go out of range in pathological cases such as allyesconfig kernels, which have little chance of actually booting but are still used in validation. So add a Kconfig symbol for this feature, and make it depend on !COMPILE_TEST. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When building for Thumb2, the .alt.smp.init sections that are emitted by the ALT_UP() patching code may not be 32-bit aligned, even though the fixup_smp_on_up() routine expects that. This results in alignment faults at module load time, which need to be fixed up by the fault handler. So let's align those sections explicitly, and prevent this from occurring. Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
On UP systems, only a single task can be 'current' at the same time, which means we can use a global variable to track it. This means we can also enable THREAD_INFO_IN_TASK for those systems, as in that case, thread_info is accessed via current rather than the other way around, removing the need to store thread_info at the base of the task stack. This, in turn, permits us to enable IRQ stacks and vmap'ed stacks on UP systems as well. To partially mitigate the performance overhead of this arrangement, use a ADD/ADD/LDR sequence with the appropriate PC-relative group relocations to load the value of current when needed. This means that accessing current will still only require a single load as before, avoiding the need for a literal to carry the address of the global variable in each function. However, accessing thread_info will now require this load as well. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Permit the use of the TPIDRPRW system register for carrying the per-CPU offset in generic SMP configurations that also target non-SMP capable ARMv6 cores. This uses the SMP_ON_UP code patching framework to turn all TPIDRPRW accesses into reads/writes of entry #0 in the __per_cpu_offset array. While at it, switch over some existing direct TPIDRPRW accesses in asm code to invocations of a new helper that is patched in the same way when necessary. Note that CPU_V6+SMP without SMP_ON_UP results in a kernel that does not boot on v6 CPUs without SMP extensions, so add this dependency to Kconfig as well. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M