Pull ARM SoC fixes from Arnd Bergmann:
 "Here is a third set of fixes for the soc tree, well within the
  expected set of changes.

  Maintainer list changes:
   - Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
   - Broadcom iProc has a new git tree

  Regressions:
   - Robert Foss sends a revert for a Mediatek DPI bridge patch that
     caused an inadvertent break in the DT binding
   - mstar timers need to be included in Kconfig

  Devicetree fixes for:
   - Aspeed ast2600 spi pinmux
   - Tegra eDP panels on Nyan FHD
   - Tegra display IOMMU
   - Qualcomm sm8350 UFS clocks
   - minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
     sm8450, and Broadcom BCM2711"

* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
  MAINTAINERS: Update Jisheng's email address
  Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
  dt-bindings: drm/bridge: anx7625: Revert DPI support
  ARM: dts: aspeed: Fix AST2600 quad spi group
  MAINTAINERS: update Krzysztof Kozlowski's email
  MAINTAINERS: Update git tree for Broadcom iProc SoCs
  ARM: tegra: Move Nyan FHD panels to AUX bus
  arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
  ARM: mstar: Select HAVE_ARM_ARCH_TIMER
  soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
  arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
  ARM: boot: dts: bcm2711: Fix HVS register range
  arm64: dts: qcom: c630: disable crypto due to serror
  arm64: dts: qcom: sm8450: fix apps_smmu interrupts
  arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
  arm64: dts: qcom: sm8350: Correct UFS symbol clocks
  arm64: tegra: Disable ISO SMMU for Tegra194
  Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"

Requesting quad mode for the FMC resulted in an error:

  &fmc {
         status = "okay";
 +       pinctrl-names = "default";
 +       pinctrl-0 = <&pinctrl_fwqspi_default>'

[    0.742963] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table


This is because the quad mode pins are a group of pins, not a function.

After applying this patch we can request the pins and the QSPI data
lines are muxed:

 # cat /sys/kernel/debug/pinctrl/1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep 1e620000.spi
 pin 196 (AE12): device 1e620000.spi function FWSPID group FWQSPID
 pin 197 (AF12): device 1e620000.spi function FWSPID group FWQSPID
 pin 240 (Y1): device 1e620000.spi function FWSPID group FWQSPID
 pin 241 (Y2): device 1e620000.spi function FWSPID group FWQSPID
 pin 242 (Y3): device 1e620000.spi function FWSPID group FWQSPID
 pin 243 (Y4): device 1e620000.spi function FWSPID group FWQSPID

Fixes: f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: tegra: Device tree fixes for v5.17

One more patch to fix up eDP panels on Nyan FHD models.

* tag 'tegra-for-5.17-arm-dt-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Move Nyan FHD panels to AUX bus
  ARM: tegra: Move panels to AUX bus

Link: https://lore.kernel.org/r/20220308084339.2199400-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Similarly to what was earlier done for other Nyan variants, move the eDP
panel on the FHD models to the AUX bus as well.

Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: ef6fb9875ce0 ("ARM: tegra: Add device-tree for 1080p version of Nyan Big")
Signed-off-by: Thierry Reding <treding@nvidia.com>

Fixes for omaps

Fixes for devkit8000 timer regression. Similar to the earlier beagleboard
fixes, we must not configure the clocksource drivers to use an alternative
timer configuration. It causes unnecessary issues with power management.
Only some old designs based on early beagleboard revisions with a miswired
timer need to use the alternative timer.

* tag 'omap-for-v5.17/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Use 32KiHz oscillator on devkit8000
  ARM: dts: switch timer config to common devkit8000 devicetree

Link: https://lore.kernel.org/r/pull-1645606483-876944@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: tegra: Device tree fixes for v5.17-rc6

This contains fixes for the eDP panel found on the Venice 2 and Nyan
boards.

* tag 'tegra-for-5.17-arm-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Move panels to AUX bus

Link: https://lore.kernel.org/r/20220223162209.293722-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Fix the display-port-sound on Gru devices, DDR voltage on the Quartz-A
board, fix emmc signal-integrity and usb OTG mode on rk3399-puma as well
as a number of dtschema fixes to make the reduce the number of errors.

* tag 'v5.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: fix a typo on rk3288 crypto-controller
  ARM: dts: rockchip: reorder rk322x hmdi clocks
  arm64: dts: rockchip: reorder rk3399 hdmi clocks
  arm64: dts: rockchip: align pl330 node name with dtschema
  arm64: dts: rockchip: fix rk3399-puma eMMC HS400 signal integrity
  arm64: dts: rockchip: fix Quartz64-A ddr regulator voltage
  arm64: dts: rockchip: Switch RK3399-Gru DP to SPDIF output
  arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG mode
  arm64: dts: rockchip: drop pclk_xpcs from gmac0 on rk3568
  arm64: dts: rockchip: fix dma-controller node names on rk356x

Link: https://lore.kernel.org/r/1973741.CViHJPHrxy@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

While the HVS has the same context memory size in the BCM2711 than in
the previous SoCs, the range allocated to the registers doubled and it
now takes 16k + 16k, compared to 8k + 16k before.

The KMS driver will use the whole context RAM though, eventually
resulting in a pointer dereference error when we access the higher half
of the context memory since it hasn't been mapped.

Fixes: 4564363351e2 ("ARM: dts: bcm2711: Enable the display pipeline")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Move the eDP panel on Venice 2 and Nyan boards into the corresponding
AUX bus device tree node. This allows us to avoid a nasty circular
dependency that would otherwise be created between the DPAUX and panel
nodes via the DDC/I2C phandle.

Fixes: eb481f9ac95c ("ARM: tegra: add Acer Chromebook 13 device tree")
Fixes: 59fe02cb079f ("ARM: tegra: Add DTS for the nyan-blaze board")
Fixes: 40e231c770a4 ("ARM: tegra: Enable eDP for Venice2")
Signed-off-by: Thierry Reding <treding@nvidia.com>

Devkit8000 board seems to always used 32k_counter as clocksource.
Restore this behavior.

If clocksource is back to 32k_counter, timer12 is now the clockevent
source (as before) and timer2 is not longer needed here.

This commit fixes the same issue observed with commit 23885389dbbb
("ARM: dts: Fix timer regression for beagleboard revision c") when sleep
is blocked until hitting keys over serial console.

Fixes: aba1ad05da08 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>