Pull more ARM DT changes from Arnd Bergmann:
 "Here are some final updates for ARM SoC specific dts files:

   - The i.MX changes were sent relatively late, and had a dependency on
     the clk tree, so I delayed that a bit.  Support for the new i.MX6qp
     SoC and a couple of new boards is added in this branch.

   - Uniphier renames a few files to match the final product names that
     were decided by the company, kudos to the kernel developer(s) for
     getting support upstream before the product release.  Also two
     boards are added.  The patches were posted early enough and nice
     overall, but we forgot to apply them and decided to give it some
     more time in linux-next

   - at91 has two small bug fixes"

* tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
  ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
  ARM: dts: uniphier: add pinmux node for I2C ch4
  ARM: dts: uniphier: add @{address} to EEPROM node
  ARM: dts: uniphier: add PH1-Pro4 Sanji board support
  ARM: dts: uniphier: add PH1-Pro4 Ace board support
  ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board
  ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board
  ARM: dts: uniphier: add reference clock nodes
  ARM: dts: uniphier: rework UniPhier System Bus nodes
  ARM: dts: uniphier: factor out ranges property of support card
  arm64: dts: uniphier: rename PH1-LD10 to PH1-LD20
  ARM: dts: imx53-qsb: Fix gpio button polarity
  ARM: dts: vfxxx: Add DAC node for Vybrid SoC
  ARM: dts: imx6q: add missing links between ipu2 and mipi dsi
  ARM: dts: imx: Add support for Advantech/GE B850v3
  ARM: dts: imx: Add support for Advantech/GE B650v3
  ARM: dts: imx: Add support for Advantech/GE B450v3
  ARM: dts: imx: Add support for Advantech/GE Bx50v3
  ARM: dts: imx: Add Advantech BA-16 Qseven module
  ...

Merge "First fixes batch for AT91 on 4.6 - DT only fixes" from Nicolas Ferre:
- prevent the boards from having glitches when inserting/removing SD card on
  sama5d3/d4 Xplained. The regulators should be kept on.

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
  ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
  ARM: dts: at91: sama5d2 Xplained: add leds node
  ARM: dts: at91: sama5d2 Xplained: add user push button
  ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
  ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
  ARM: dts: at91: sama5d2: add dma properties to UART nodes
  ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node

Pull clk updates from Stephen Boyd:
 "The clk changes for this release cycle are mostly dominated by new
  device support in terms of LoC, but there has been some cleanup in the
  core as well as the usual minor clk additions to various drivers.

  Core:
   - parent tracking has been simplified
   - CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started
   - of_clk_init() doesn't consider disabled DT nodes anymore
   - clk_unregister() had an error path bug squashed
   - of_clk_get_parent_count() has been fixed to only return unsigned ints
   - HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone

  New Drivers:
   - NXP LPC18xx creg
   - QCOM IPQ4019 GCC
   - TI dm814x ADPLL
   - i.MX6QP

  Updates:
   - Cyngus audio clks found on Broadcom iProc devices
   - Non-critical fixes for BCM2385 PLLs
   - Samsung exynos5433 updates for clk id errors, HDMI support,
     suspend/resume simplifications
   - USB, CAN, LVDS, and FCP clks on shmobile devices
   - sunxi got support for more clks on new SoCs and went through a
     minor refactoring/rewrite to use a simpler factor clk construct
   - rockchip added some more clk ids and added suport for fraction
     dividers
   - QCOM GDSCs in msm8996
   - A new devm helper to make adding custom actions simpler (acked by Greg)"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (197 commits)
  clk: bcm2835: fix check of error code returned by devm_ioremap_resource()
  clk: renesas: div6: use RENESAS for #define
  clk: renesas: Rename header file renesas.h
  clk: max77{686,802}: Remove CLK_IS_ROOT
  clk: versatile: Remove CLK_IS_ROOT
  clk: sunxi: Remove use of variable length array
  clk: fixed-rate: Remove CLK_IS_ROOT
  clk: qcom: Remove CLK_IS_ROOT
  doc: dt: add documentation for lpc1850-creg-clk driver
  clk: add lpc18xx creg clk driver
  clk: lpc32xx: fix compilation warning
  clk: xgene: Add missing parenthesis when clearing divider value
  clk: mb86s7x: Remove CLK_IS_ROOT
  clk: x86: Remove clkdev.h and clk.h includes
  clk: x86: Remove CLK_IS_ROOT
  clk: mvebu: Remove CLK_IS_ROOT
  clk: renesas: move drivers to renesas directory
  clk: si5{14,351,70}: Remove CLK_IS_ROOT
  clk: scpi: Remove CLK_IS_ROOT
  clk: s2mps11: Remove CLK_IS_ROOT
  ...

If enabling the hsmci regulator on card detection, the board can reboot
on sd card insertion. Keeping the regulator always enabled fixes this
issue.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: 8d545f32bd77 ("ARM: at91/dt: sama5d4 xplained: add regulators for v(q)mmc1 supplies")
Cc: stable@vger.kernel.org #4.3 and later
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

If enabling the hsmci regulator on card detection, the board can reboot
on sd card insertion. Keeping the regulator always enabled fixes this
issue.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: 1b53e3416dd0 ("ARM: at91/dt: sama5d3 xplained: add fixed regulator for vmmc0")
Cc: stable@vger.kernel.org #4.3 and later
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Pull ARM DT updates from Arnd Bergmann:
 "These are all the updates to device tree files for 32-bit platforms,
  plus a couple of related 64-bit updates:

  New SoC support:
   - Allwinner A83T
   - Axis Artpec-6 SoC
   - Mediatek MT7623 SoC
   - TI Keystone K2G SoC
   - ST Microelectronics stm32f469

  New board or machine support:
   - ARM Juno R2
   - Buffalo Linkstation LS-QVL and LS-GL
   - Cubietruck plus
   - D-Link DIR-885L
   - DT support for ARM RealView PB1176 and PB11MPCore
   - Google Nexus 7
   - Homlet v2
   - Itead Ibox
   - Lamobo R1
   - LG Optimus Black
   - Logicpd dm3730
   - Raspberry Pi Model A

  Other changes include
   - Lots of updates for Qualcomm APQ8064, MSM8974 and others
   - Improved support for Nokia N900 and other OMAP machines
   - Common clk support for lpc32xx
   - HDLCD display on ARM
   - Improved stm32f429 support
   - Improved Renesas device support, r8a779x and others
   - Lots of Rockchip updates
   - Samsung cleanups
   - ADC support for Atmel SAMA5D2
   - BCM2835 (Raspberry Pi) improvements
   - Broadcom Northstar Plus enhancements
   - OMAP GPMC rework
   - Several improvements for Atmel SAMA5D2 / Xplained
   - Global change to remove inofficial "arm,amba-bus" compatible
     string"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (350 commits)
  ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus"
  ARM: dts: artpec: dual-license on artpec6.dtsi
  ARM: dts: ux500: add synaptics RMI4 for Ux500 TVK DT
  arm64: dts: juno/vexpress: fix node name unit-address presence warnings
  arm64: dts: foundation-v8: add SBSA Generic Watchdog device node
  ARM: dts: at91: sama5d2 Xplained: add leds node
  ARM: dts: at91: sama5d2 Xplained: add user push button
  ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
  ARM: dts: stm32f429: Enable Ethernet on Eval board
  ARM: dts: omap3-sniper: TWL4030 keypad support
  Revert "ARM: dts: DRA7: Add dt nodes for PWMSS"
  ARM: dts: dm814x: dra62x: Disable wait pin monitoring for NAND
  ARM: dts: dm814x: dra62x: Fix NAND device nodes
  ARM: dts: stm32f429: Add Ethernet support
  ARM: dts: stm32f429: Add system config bank node
  ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
  ARM: dts: at91: sama5d2: add dma properties to UART nodes
  ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node
  ARM: dts: exynos: Don't overheat the Odroid XU3-Lite on high load
  ARM: dts: exynos: Add cooling levels for Exynos5422/5800 CPUs
  ...

Pull ARM SoC platform updates from Arnd Bergmann:
 "Newly added support for additional SoCs:
   - Axis Artpec-6 SoC family
   - Allwinner A83T SoC
   - Mediatek MT7623
   - NXP i.MX6QP SoC
   - ST Microelectronics stm32f469 microcontroller

  New features:
   - SMP support for Mediatek mt2701
   - Big-endian support for NXP i.MX
   - DaVinci now uses the new DMA engine dma_slave_map
   - OMAP now uses the new DMA engine dma_slave_map
   - earlyprintk support for palmchip uart on mach-tango
   - delay timer support for orion

  Other:
   - Exynos PMU driver moved out to drivers/soc/
   - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
     uniphier"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: uniphier: rework SMP code to support new System Bus binding
  ARM: uniphier: add missing of_node_put()
  ARM: at91: avoid defining CONFIG_* symbols in source code
  ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
  ARM: imx: Make reset_control_ops const
  ARM: imx: Do L2 errata only if the L2 cache isn't enabled
  ARM: imx: select ARM_CPU_SUSPEND only for imx6
  dmaengine: pxa_dma: fix the maximum requestor line
  ARM: alpine: select the Alpine MSI controller driver
  ARM: pxa: add the number of DMA requestor lines
  dmaengine: mmp-pdma: add number of requestors
  dma: mmp_pdma: Add the #dma-requests DT property documentation
  ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
  ARM: s3c24xx: Avoid warning for inb/outb
  ARM: zynq: Move early printk virtual address to vmalloc area
  ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
  ARM: SAMSUNG: Remove unused register offset definition
  ARM: EXYNOS: Cleanup header files inclusion
  drivers: soc: samsung: Enable COMPILE_TEST
  MAINTAINERS: Add maintainers entry for drivers/soc/samsung
  ...

Pull ARM updates from Russell King:
 "Another mixture of changes this time around:

   - Split XIP linker file from main linker file to make it more
     maintainable, and various XIP fixes, and clean up a resulting
     macro.

   - Decompressor cleanups from Masahiro Yamada

   - Avoid printing an error for a missing L2 cache

   - Remove some duplicated symbols in System.map, and move
     vectors/stubs back into kernel VMA

   - Various low priority fixes from Arnd

   - Updates to allow bus match functions to return negative errno
     values, touching some drivers and the driver core.  Greg has acked
     these changes.

   - Virtualisation platform udpates form Jean-Philippe Brucker.

   - Security enhancements from Kees Cook

   - Rework some Kconfig dependencies and move PSCI idle management code
     out of arch/arm into drivers/firmware/psci.c

   - ARM DMA mapping updates, touching media, acked by Mauro.

   - Fix places in ARM code which should be using virt_to_idmap() so
     that Keystone2 can work.

   - Fix Marvell Tauros2 to work again with non-DT boots.

   - Provide a delay timer for ARM Orion platforms"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits)
  ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0
  ARM: 8547/1: dma-mapping: store buffer information
  ARM: 8543/1: decompressor: rename suffix_y to compress-y
  ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile
  ARM: 8541/1: decompressor: drop redundant FORCE in Makefile
  ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files
  ARM: 8539/1: decompressor: drop more unneeded assignments to "targets"
  ARM: 8538/1: decompressor: drop unneeded assignments to "targets"
  ARM: 8532/1: uncompress: mark putc as inline
  ARM: 8531/1: turn init_new_context into an inline function
  ARM: 8530/1: remove VIRT_TO_BUS
  ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL
  ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds
  ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL
  ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs
  ARM: make the physical-relative calculation more obvious
  ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL
  ARM: 8411/1: Add default SPARSEMEM settings
  ARM: 8503/1: clk_register_clkdev: remove format string interface
  ARM: 8529/1: remove 'i' and 'zi' targets
  ...

Pull DeviceTree updates from Rob Herring:

 - new tool 'dtx_diff' to diff DT files

 - sync kernel's dtc/libfdt to current dtc repo master

 - fix for reserved memory regions located in highmem

 - document standard unit suffixes for DT properties

 - various DT binding doc updates

* tag 'devicetree-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: Add vendor prefix for eGalax_eMPIA Technology Inc
  Input: ads7846: Add description how to use internal reference (ADS7846)
  ARM: realview: add EB syscon variants to bindings
  devicetree: bindings: ARM: Use "uV" for micro-volt
  serial: fsl-imx-uart: Fix typo in fsl,dte-mode description
  of: add 'const' for of_property_*_string*() parameter '*np'
  of/unittest: fix infinite loop in of_unittest_destroy_tracked_overlays()
  of: alloc anywhere from memblock if range not specified
  kbuild: Allow using host dtc instead of kernel's copy
  of: resolver: Add missing of_node_get and of_node_put
  of: Add United Radiant Technology Corporation vendor prefix
  dt/bindings: add documentation on standard property unit suffixes
  scripts/dtc: Update to upstream commit b06e55c88b9b
  ARM: boot: Add an implementation of strnlen for libfdt
  scripts/dtc: dtx_diff - add info to error message
  dtc: create tool to diff device trees

Pull networking updates from David Miller:
 "Highlights:

   1) Support more Realtek wireless chips, from Jes Sorenson.

   2) New BPF types for per-cpu hash and arrap maps, from Alexei
      Starovoitov.

   3) Make several TCP sysctls per-namespace, from Nikolay Borisov.

   4) Allow the use of SO_REUSEPORT in order to do per-thread processing
   of incoming TCP/UDP connections.  The muxing can be done using a
   BPF program which hashes the incoming packet.  From Craig Gallek.

   5) Add a multiplexer for TCP streams, to provide a messaged based
      interface.  BPF programs can be used to determine the message
      boundaries.  From Tom Herbert.

   6) Add 802.1AE MACSEC support, from Sabrina Dubroca.

   7) Avoid factorial complexity when taking down an inetdev interface
      with lots of configured addresses.  We were doing things like
      traversing the entire address less for each address removed, and
      flushing the entire netfilter conntrack table for every address as
      well.

   8) Add and use SKB bulk free infrastructure, from Jesper Brouer.

   9) Allow offloading u32 classifiers to hardware, and implement for
      ixgbe, from John Fastabend.

  10) Allow configuring IRQ coalescing parameters on a per-queue basis,
      from Kan Liang.

  11) Extend ethtool so that larger link mode masks can be supported.
      From David Decotigny.

  12) Introduce devlink, which can be used to configure port link types
      (ethernet vs Infiniband, etc.), port splitting, and switch device
      level attributes as a whole.  From Jiri Pirko.

  13) Hardware offload support for flower classifiers, from Amir Vadai.

  14) Add "Local Checksum Offload".  Basically, for a tunneled packet
      the checksum of the outer header is 'constant' (because with the
      checksum field filled into the inner protocol header, the payload
      of the outer frame checksums to 'zero'), and we can take advantage
      of that in various ways.  From Edward Cree"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
  bonding: fix bond_get_stats()
  net: bcmgenet: fix dma api length mismatch
  net/mlx4_core: Fix backward compatibility on VFs
  phy: mdio-thunder: Fix some Kconfig typos
  lan78xx: add ndo_get_stats64
  lan78xx: handle statistics counter rollover
  RDS: TCP: Remove unused constant
  RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
  net: smc911x: convert pxa dma to dmaengine
  team: remove duplicate set of flag IFF_MULTICAST
  bonding: remove duplicate set of flag IFF_MULTICAST
  net: fix a comment typo
  ethernet: micrel: fix some error codes
  ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
  bpf, dst: add and use dst_tclassid helper
  bpf: make skb->tc_classid also readable
  net: mvneta: bm: clarify dependencies
  cls_bpf: reset class and reuse major in da
  ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
  ldmvsw: Add ldmvsw.c driver code
  ...