linux.git/arch/arm/boot, branch v3.18-rc2 Linux kernel source tree Merge tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes 2014-10-26T03:44:05+00:00 Olof Johansson olof@lixom.net 2014-10-26T03:44:05+00:00 efc176a8ee1f959b89292597bd8a99417475a79a Merge "ARM: imx: fixes for 3.18" from Shawn Guo: The i.MX fixes for 3.18: - Revert one patch which increases I2C bus frequency on imx28-evk - Fix a typo on imx6q EIM clock name * tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo Signed-off-by: Olof Johansson <olof@lixom.net> 
Merge "ARM: imx: fixes for 3.18" from Shawn Guo:

The i.MX fixes for 3.18:
 - Revert one patch which increases I2C bus frequency on imx28-evk
 - Fix a typo on imx6q EIM clock name

* tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx28-evk: Let i2c0 run at 100kHz
  ARM: i.MX6: Fix "emi" clock name typo

Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: dts: imx28-evk: Let i2c0 run at 100kHz 2014-10-25T12:17:36+00:00 Fabio Estevam fabio.estevam@freescale.com 2014-10-20T13:08:01+00:00 d1e61eb443dc7512885dfe89ee2f2a1c29fcb1da Commit 78b81f4666fb ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues when doing the following sequence in loop: - Boot the kernel - Perform audio playback - Reboot the system via 'reboot' command In many times the audio card cannot be probed, which causes playback to fail. After restoring to the original i2c0 frequency of 100kHz there is no such problem anymore. This reverts commit 78b81f4666fbb22a20b1e63e5baf197ad2e90e88. Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 
Commit 78b81f4666fb ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues
when doing the following sequence in loop:

- Boot the kernel
- Perform audio playback
- Reboot the system via 'reboot' command

In many times the audio card cannot be probed, which causes playback to fail.

After restoring to the original i2c0 frequency of 100kHz there is no such
problem anymore.

This reverts commit 78b81f4666fbb22a20b1e63e5baf197ad2e90e88.

Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Merge tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next into fixes 2014-10-24T04:05:45+00:00 Olof Johansson olof@lixom.net 2014-10-24T04:05:45+00:00 4fbc400cfc56fb6cb62197ff2244696770251bdf Merge "SOCFPGA fixes for 3.18" from Dinh Nguyen: These patches fixes an SMP and SDMMC driver hang during boot up on the SOCFPGA platform. Patch "arm: socfpga: fix fetching cpu1start_addr for SMP" fixes the SMP trampoline code in order for CPU1 to correctly fetch it's cpu1start_addr. Patch "ARM: dts: socfpga: rename gpio nodes" renames that GPIO node in order to allow a standard way of specifying status="okay" in the board DTS file. Patch "ARM: dts: socfpga: Fix SD card detect" fixes a SDMMC driver hang during boot. The reason for the hang was the deferred probe of the SDMMC driver was waiting for the GPIO resource that would never come. Patch "ARM: dts: socfpga: Add a 3.3V fixed regulator node" adds a fixed regulator node for the SDMMC driver to use. * tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next: ARM: dts: socfpga: Add a 3.3V fixed regulator node ARM: dts: socfpga: Fix SD card detect ARM: dts: socfpga: rename gpio nodes arm: socfpga: fix fetching cpu1start_addr for SMP Signed-off-by: Olof Johansson <olof@lixom.net> 
Merge "SOCFPGA fixes for 3.18" from Dinh Nguyen:

These patches fixes an SMP and SDMMC driver hang during boot up on the
SOCFPGA platform.

Patch "arm: socfpga: fix fetching cpu1start_addr for SMP" fixes the SMP
trampoline code in order for CPU1 to correctly fetch it's cpu1start_addr.

Patch "ARM: dts: socfpga: rename gpio nodes" renames that GPIO node in order
to allow a standard way of specifying status="okay" in the board DTS file.

Patch "ARM: dts: socfpga: Fix SD card detect" fixes a SDMMC driver hang
during boot. The reason for the hang was the deferred probe of the SDMMC
driver was waiting for the GPIO resource that would never come.

Patch "ARM: dts: socfpga: Add a 3.3V fixed regulator node" adds a fixed
regulator node for the SDMMC driver to use.

* tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next:
  ARM: dts: socfpga: Add a 3.3V fixed regulator node
  ARM: dts: socfpga: Fix SD card detect
  ARM: dts: socfpga: rename gpio nodes
  arm: socfpga: fix fetching cpu1start_addr for SMP

Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes 2014-10-24T04:02:49+00:00 Olof Johansson olof@lixom.net 2014-10-24T04:02:49+00:00 184f84d9b94e142009835bd872f180c5264fbeeb Merge "at91: fixes for v3.18 #1" from Nicholas Ferre: First AT91 fixes for 3.18: - one more MAINTAINERS entry for the SSC driver - a fix for the newly introduced power/reset driver - a fix on at91sam9263 USB due to PLLB misconfiguration * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: sam9263: fix PLLB frequencies power: reset: at91-reset: fix power down register MAINTAINERS: add atmel ssc driver maintainer entry Signed-off-by: Olof Johansson <olof@lixom.net> 
Merge "at91: fixes for v3.18 #1" from Nicholas Ferre:

First AT91 fixes for 3.18:
- one more MAINTAINERS entry for the SSC driver
- a fix for the newly introduced power/reset driver
- a fix on at91sam9263 USB due to PLLB misconfiguration

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: sam9263: fix PLLB frequencies
  power: reset: at91-reset: fix power down register
  MAINTAINERS: add atmel ssc driver maintainer entry

Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: dts: socfpga: Add a 3.3V fixed regulator node 2014-10-23T02:00:19+00:00 Dinh Nguyen dinguyen@opensource.altera.com 2014-10-16T19:43:53+00:00 efb4a44e24df2b98464977aee5be41148936fc7c Without the 3.3V regulator node, the SDMMC driver will give these warnings: dw_mmc ff704000.dwmmc0: No vmmc regulator found dw_mmc ff704000.dwmmc0: No vqmmc regulator found This patch adds the regulator node, and points the SD/MMC to the regulator. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Reviewed-by: Doug Anderson <dianders@chromium.org> --- v3: Rename nodes to have schematic-name_regulator and remove "boot-on" and "always-on" v2: Move the regulator nodes to their respective board dts file and correctly rename them to match the schematic 
Without the 3.3V regulator node, the SDMMC driver will give these warnings:

dw_mmc ff704000.dwmmc0: No vmmc regulator found
dw_mmc ff704000.dwmmc0: No vqmmc regulator found

This patch adds the regulator node, and points the SD/MMC to the regulator.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
---
v3: Rename nodes to have schematic-name_regulator and remove "boot-on" and
    "always-on"
v2: Move the regulator nodes to their respective board dts file and
    correctly rename them to match the schematic
ARM: dts: socfpga: Fix SD card detect 2014-10-23T01:59:45+00:00 Dinh Nguyen dinguyen@opensource.altera.com 2014-10-16T19:54:51+00:00 23920c0552a462a095b9afa044ebedf8f9201c53 Without this patch, the booting the SOCFPGA platform would hang at the SDMMC driver loading. The issue, debugged by Doug Anderson, turned out to be that the GPIO bank used by the SD card-detect was not set to status="okay". Also update the cd-gpios to point to portb of the &gpio1 GPIO IP. Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v4: Use &gpio1 to set status="okay" and update cd-gpio=&portb v3: Correctly degugged the issue to be a gpio node not having status="okay" 
Without this patch, the booting the SOCFPGA platform would hang at the
SDMMC driver loading. The issue, debugged by Doug Anderson, turned out
to be that the GPIO bank used by the SD card-detect was not set to
status="okay".

Also update the cd-gpios to point to portb of the &gpio1 GPIO IP.

Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v4: Use &gpio1 to set status="okay" and update cd-gpio=&portb
v3: Correctly degugged the issue to be a gpio node not having status="okay"
ARM: dts: socfpga: rename gpio nodes 2014-10-23T01:59:07+00:00 Dinh Nguyen dinguyen@opensource.altera.com 2014-10-22T18:00:42+00:00 d11ac1d2d556ca8495e06d7c00fe5a96e4934e98 Since the Synopsys GPIO IP can support multiple ports of varying widths, it would make more sense to have the GPIO node DTS entry as this: gpio0: gpio@ff708000{ porta{ }; }; Also, this is documented in the snps-dwapb-gpio.txt. Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> 
Since the Synopsys GPIO IP can support multiple ports of varying widths, it
would make more sense to have the GPIO node DTS entry as this:

gpio0: gpio@ff708000{
	porta{
	};
};

Also, this is documented in the snps-dwapb-gpio.txt.

Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
ARM: at91/dt: sam9263: fix PLLB frequencies 2014-10-22T08:08:22+00:00 Boris Brezillon boris.brezillon@free-electrons.com 2014-10-10T13:50:21+00:00 106c67af2fb938880edbf43b49dabbd8d2534839 PLLB input and output ranges were wrongly copied from at91sam9261 as the datasheet didn't mention explicitly PLLB. Correct their values. This fixes USB. Reported-by: Andreas Henriksson <andreas.henriksson@endian.se> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Andreas Henriksson <andreas.henriksson@endian.se> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> 
PLLB input and output ranges were wrongly copied from at91sam9261 as the
datasheet didn't mention explicitly PLLB. Correct their values.

This fixes USB.

Reported-by: Andreas Henriksson <andreas.henriksson@endian.se>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Andreas Henriksson <andreas.henriksson@endian.se>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
ARM: zynq: DT: trivial: Fix mc node 2014-10-20T13:20:17+00:00 Michal Simek michal.simek@xilinx.com 2014-10-20T13:15:47+00:00 2329efbbca2943f03fa1c7306ef2f6a053be0ae5 sed -i 's/}\ ;/};/g' Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
sed -i 's/}\ ;/};/g'

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
ARM: zynq: DT: Add cadence watchdog node 2014-10-20T13:20:16+00:00 Michal Simek michal.simek@xilinx.com 2014-10-02T13:09:15+00:00 6714297b1bb472d3b475af47ed0f91bbe012eea4 Add the cadence watchdog node to the Zynq devicetree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
Add the cadence watchdog node to the Zynq devicetree.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>