Pull ARM SoC fixes from Olof Johansson:
 "Only two patches this time, one to fix ethernet probe order on at91
  (better fix with proper device aliasing will be done for 3.15, this is
  stop-gap), and one update to MAINTAINERS due to Freescale moving their
  repo to kernel.org"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: at91: fix network interface ordering for sama5d36
  MAINTAINERS: update IMX kernel git tree

On the newly introduced sama5d36, Gigabit and 10/100 Ethernet network
interfaces are probed in a different order than for the sama5d35.
Moreover, users are accustomed to this order in bootloaders and backports
for older kernel revisions.
So this patch switches DT node order as it is done for the other dual-Ethernet
sama5d3 SoC.
Better interface numbering which does not depend on DT node order is being
developed for stronger interface identification.

Signed-off-by: Boris BREZILLON <b.brezillon.dev@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull ARM SoC fixes from from Olof Johansson:
 "A collection of fixes for ARM platforms.  A little large due to us
  missing to do one last week, but there's nothing in particular here
  that is in itself large and scary.

  Mostly a handful of smaller fixes all over the place.  The majority is
  made up of fixes for OMAP, but there are a few for others as well.  In
  particular, there was a decision to rename a binding for the Broadcom
  pinctrl block that we need to go in before the final release since we
  then treat it as ABI"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting
  ARM: tegra: add LED options back into tegra_defconfig
  ARM: dts: omap3-igep: fix boot fail due wrong compatible match
  ARM: OMAP3: Fix pinctrl interrupts for core2
  pinctrl: Rename Broadcom Capri pinctrl binding
  pinctrl: refer to updated dt binding string.
  Update dtsi with new pinctrl compatible string
  ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP
  ARM: OMAP2+: Add support for thumb mode on DT booted N900
  ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT
  ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4
  ARM: DRA7: hwmod data: correct the sysc data for spinlock
  ARM: OMAP5: PRM: Fix reboot handling
  ARM: sunxi: dt: Change the touchscreen compatibles
  ARM: sun7i: dt: Fix interrupt trigger types

From Tony Lindgren:

Two omap3430 vs 3630 device tree regression fixes for
issues booting 3430 based boards.

* tag 'omap-for-v3.14/fixes-dt-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting
  ARM: dts: omap3-igep: fix boot fail due wrong compatible match

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge 'bcm pinctrl rename' From Christin Daudt:

Rename pinctrl dt binding to restore consistency with other bcm mobile
bindings.

* tag 'bcm-for-3.14-pinctrl-reduced-rename' of git://github.com/broadcom/bcm11351:
  pinctrl: Rename Broadcom Capri pinctrl binding
  pinctrl: refer to updated dt binding string.
  Update dtsi with new pinctrl compatible string
  + Linux 3.14-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>

Allwinner fixes from Maxime Ripard:

Two fixes for device trees additions that got added in 3.14. One fixes the
interrupt types of some IPs, the other fixes up a compatible that got
introduced during 3.14

* tag 'sunxi-fixes-for-3.14' of https://github.com/mripard/linux:
  ARM: sunxi: dt: Change the touchscreen compatibles
  ARM: sun7i: dt: Fix interrupt trigger types

Signed-off-by: Olof Johansson <olof@lixom.net>

Pull ARM fixes from Russell King:
 "A number of ARM updates for -rc, covering mostly ARM specific code,
  but with one change to modpost.c to allow Thumb section mismatches to
  be detected.

  ARM changes include reporting when an attempt is made to boot a LPAE
  kernel on hardware which does not support LPAE, rather than just being
  silent about it.

  A number of other minor fixes are included too"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 7992/1: boot: compressed: ignore bswapsdi2.S
  ARM: 7991/1: sa1100: fix compile problem on Collie
  ARM: fix noMMU kallsyms symbol filtering
  ARM: 7980/1: kernel: improve error message when LPAE config doesn't match CPU
  ARM: 7964/1: Detect section mismatches in thumb relocations
  ARM: 7963/1: mm: report both sections from PMD

Commit 017f161a55b4 (ARM: 7877/1: use built-in byte swap function) added
bswapsdi2.{o,S} to arch/arm/boot/compressed/Makefile, but didn't update
the .gitignore. Thus after a a build git status shows bswapsdi2.S as a
new file, which is a little annoying.

This patch updates arch/arm/boot/compressed/.gitignore to ignore
bswapsdi2.S, as we already do for ashldi3.S and others.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Without that change booting leads to crash with more warnings like below:
[    0.284454] omap_hwmod: uart4: cannot clk_get main_clk uart4_fck
[    0.284484] omap_hwmod: uart4: cannot _init_clocks
[    0.284484] ------------[ cut here ]------------
[    0.284545] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2543 _init+0x300/0x3e4()
[    0.284545] omap_hwmod: uart4: couldn't init clocks
[    0.284576] Modules linked in:
[    0.284606] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-next-20140124-00020-gd2aefec-dirty #26
[    0.284637] [<c00151c0>] (unwind_backtrace) from [<c0011e20>] (show_stack+0x10/0x14)
[    0.284667] [<c0011e20>] (show_stack) from [<c0568544>] (dump_stack+0x7c/0x94)
[    0.284729] [<c0568544>] (dump_stack) from [<c003ff94>] (warn_slowpath_common+0x6c/0x90)
[    0.284729] [<c003ff94>] (warn_slowpath_common) from [<c003ffe8>] (warn_slowpath_fmt+0x30/0x40)
[    0.284759] [<c003ffe8>] (warn_slowpath_fmt) from [<c07d1be8>] (_init+0x300/0x3e4)
[    0.284790] [<c07d1be8>] (_init) from [<c07d217c>] (__omap_hwmod_setup_all+0x40/0x8c)
[    0.284820] [<c07d217c>] (__omap_hwmod_setup_all) from [<c0008918>] (do_one_initcall+0xe8/0x14c)
[    0.284851] [<c0008918>] (do_one_initcall) from [<c07c5c18>] (kernel_init_freeable+0x104/0x1c8)
[    0.284881] [<c07c5c18>] (kernel_init_freeable) from [<c0563524>] (kernel_init+0x8/0x118)
[    0.284912] [<c0563524>] (kernel_init) from [<c000e368>] (ret_from_fork+0x14/0x2c)
[    0.285064] ---[ end trace 63de210ad43b627d ]---

Reference:
https://lkml.org/lkml/2013/10/8/553

Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch is based on commit:

016c12d2 ("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree")

and fixes a boot hang due the IGEP board being wrongly initialized
as an OMAP3430 platform instead of an OMAP3630.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>