linux.git/arch/arm/boot/compressed, branch v3.10

ARM: 7756/1: zImage/virt: remove hyp-stub.S during distclean

2013-06-17T09:30:54+00:00

Make sure hyp-stub.S gets removed during make distclean,
this left over file was introduced in commit:

424e599 ARM: zImage/virt: hyp mode entry support for the zImage loader

Signed-off-by: Magnus Damm 
Acked-by: Dave Martin 
Reviewed-by: Simon Horman 
Signed-off-by: Russell King

ARM: 7750/1: update legacy CPU ID in decompressor cache support jump table

2013-06-05T22:32:40+00:00

The previous mask values for the legacy ARM CPU IDs were conflicting
with the CPU ID assignments for late-generation CPUs (like the
Qualcomm MSM/QSD or Broadcom Brahma-15 processors). This change
corrects the legacy ARM CPU ID value so that the jump table can
fall-through to the appropriate cache maintenance / MMU functions.

Signed-off-by: Marc C 
Signed-off-by: Russell King

ARM: 7743/1: compressed/head.S: work around new binutils warning

2013-06-05T22:32:27+00:00

In August 2012, Matthew Gretton-Dann checked a change into binutils
labelled "Error on obsolete & warn on deprecated registers", apparently as
part of ARMv8 support. Apparently, this was supposed to emit the message
"Warning: This coprocessor register access is deprecated in ARMv8" when
using certain mcr/mrc instructions and building for ARMv8. Unfortunately,
the message that is actually emitted appears to be '(null)', which is
less helpful in comparison.

Even more unfortunately, this is biting us on every single kernel
build with a new gas, because arch/arm/boot/compressed/head.S and some
other files in that directory are built with -march=all since kernel
commit 80cec14a8 "[ARM] Add -march=all to assembly file build in
arch/arm/boot/compressed" back in v2.6.28.

This patch reverts Russell's nice solution and instead marks the head.S
file to be built for armv7-a, which fortunately lets us build all
instructions in that file without warnings even on the broken binutils.

Without this patch, building anything results in:

arch/arm/boot/compressed/head.S: Assembler messages:
arch/arm/boot/compressed/head.S:565: Warning: (null)
arch/arm/boot/compressed/head.S:676: Warning: (null)
arch/arm/boot/compressed/head.S:698: Warning: (null)
arch/arm/boot/compressed/head.S:722: Warning: (null)
arch/arm/boot/compressed/head.S:726: Warning: (null)
arch/arm/boot/compressed/head.S:957: Warning: (null)
arch/arm/boot/compressed/head.S:996: Warning: (null)
arch/arm/boot/compressed/head.S:997: Warning: (null)
arch/arm/boot/compressed/head.S:1027: Warning: (null)
arch/arm/boot/compressed/head.S:1035: Warning: (null)
arch/arm/boot/compressed/head.S:1046: Warning: (null)
arch/arm/boot/compressed/head.S:1060: Warning: (null)
arch/arm/boot/compressed/head.S:1092: Warning: (null)
arch/arm/boot/compressed/head.S:1094: Warning: (null)
arch/arm/boot/compressed/head.S:1095: Warning: (null)
arch/arm/boot/compressed/head.S:1102: Warning: (null)
arch/arm/boot/compressed/head.S:1134: Warning: (null)

Signed-off-by: Arnd Bergmann 
Cc: stable@vger.kernel.org
Cc: Matthew Gretton-Dann 
Signed-off-by: Russell King

ARM: 7737/1: fix kernel decompressor compilation error with CONFIG_DEBUG_SEMIHOSTING

2013-06-05T22:32:24+00:00

Selecting this option produces:

  AS      arch/arm/boot/compressed/debug.o
arch/arm/boot/compressed/debug.S:4:33: fatal error: mach/debug-macro.S: No such file or directory
compilation terminated.
make[3]: *** [arch/arm/boot/compressed/debug.o] Error 1

The semihosting support cannot be modelled into a senduart macro as
it requires memory space for argument passing.  So the
CONFIG_DEBUG_LL_INCLUDE may not have any sensible value and the include
directive should be omitted.

While at it, let's add proper semihosting output support to the
decompressor.

Signed-off-by: Nicolas Pitre 
Acked-by: Shawn Guo 
Signed-off-by: Russell King

ARM: 7672/1: uncompress debug support for multiplatform build

2013-03-15T17:18:52+00:00

Instead of giving zero support of uncompress debug for multiplatform
build, the patch turns uncompress debug into one part of DEBUG_LL
support.  When DEBUG_LL is turned on for a particular platform,
uncompress debug works too for that platform.

OMAP and Tegra are exceptions here.  OMAP low-level debug code places
data in the .data section, and that is not allowed in decompressor.
And Tegra code has reference to variable that's unavailable in
decompressor but only in kernel.  That's why Kconfig symbol
DEBUG_UNCOMPRESS controlling multiplatform uncompress debug support is
defined with !DEBUG_OMAP2PLUS_UART && !DEBUG_TEGRA_UART.

It creates arch/arm/boot/compressed/debug.S with CONFIG_DEBUG_LL_INCLUDE
included there, implements a generic putc() using those macros, which
will be built when DEBUG_UNCOMPRESS is defined.

Signed-off-by: Shawn Guo 
Signed-off-by: Russell King

ARM: 7671/1: use Kconfig to select uncompress.h

2013-03-15T17:18:51+00:00

Following the approach handling DEBUG_LL inclusion, the patch creates
a Kconfig symbol CONFIG_UNCOMPRESS_INCLUDE for choosing the correct
uncompress header.  For traditional build, mach/uncompress.h will be
included in arch/arm/boot/compressed/misc.c.  For multiplatform build,
debug/uncompress.h which contains a suite of empty functions will be
used.  In this way, a platform with particular uncompress.h
implementation could choose its own uncompress.h with this Kconfig
option.

Signed-off-by: Shawn Guo 
Signed-off-by: Russell King

ARM: 7666/1: decompressor: add -mno-single-pic-base for building the decompressor

2013-03-06T23:45:42+00:00

Before jumping to (position independent) C-code from the decompressor's
assembler world we set-up the C environment. This setup currently does not
set r9, which for arm-none-uclinux-uclibceabi toolchains is by default
expected to be the PIC offset base register (IE should point to the
beginning of the GOT).

Currently, therefore, in order to build working kernels that use the
decompressor it is necessary to use an arm-linux-gnueabi toolchain, or
similar. uClinux toolchains cause a prefetch abort to occur at the beginning
of the decompress_kernel function.

This patch allows uClinux toolchains to build bootable zImages by forcing
the -mno-single-pic-base option, which ensures that the location of the GOT
is re-derived each time it is required, and r9 becomes free for use as a
general purpose register.

This has a small (4% in instruction terms) advantage over the alternative of
setting r9 to point to the GOT before calling into the C-world.

Signed-off-by: Jonathan Austin 
Acked-by: Nicolas Pitre 
Signed-off-by: Russell King

ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG

2013-01-11T02:53:55+00:00

ARCH_HAS_DECOMP_WDOG is only used in lib/inflate.c which is not
included in arch/arm/boot/compressed/decompress.c now.  That said,
ARCH_HAS_DECOMP_WDOG is not used at all.  Let's remove it.

Signed-off-by: Shawn Guo 
Acked-by: Nicolas Pitre

ARM: 7600/1: include CONFIG_DEBUG_LL_INCLUDE rather than mach/debug-macro.S

2012-12-16T10:04:23+00:00

Commit 91a9fec (ARM: move debug macros to common location) moves
arch/arm/kernel/debug.S and arch/arm/kernel/head.S to
CONFIG_DEBUG_LL_INCLUDE, but leaves arch/arm/boot/compressed/head.S
still with mach/debug-macro.S.  This causes the following build error
on platforms that moved to new DEBUG_LL inclusion mechanism, when
arch/arm/boot/compressed/head.S is compiled with DEBUG turned on.

  AS      arch/arm/boot/compressed/head.o
arch/arm/boot/compressed/head.S:49:30: fatal error: mach/debug-macro.S: No such file or directory
compilation terminated.

Fix the problem by replacing mach/debug-macro.S inclusion with
CONFIG_DEBUG_LL_INCLUDE one.

Reported-by: Steev Klimaszewski 
Signed-off-by: Shawn Guo 
Signed-off-by: Russell King

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-12-12T20:05:15+00:00

Pull ARM SoC updates from Olof Johansson:
 "This contains the bulk of new SoC development for this merge window.

  Two new platforms have been added, the sunxi platforms (Allwinner A1x
  SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
  series of ARMv7 platforms from them, where the hope is that we can
  keep the platform code generic enough to have them all share one mach
  directory.  The new Broadcom platform is contributed by Christian
  Daudt.

  Highbank has grown support for Calxeda's next generation of hardware,
  ECX-2000.

  clps711x has seen a lot of cleanup from Alexander Shiyan, and he's
  also taken on maintainership of the platform.

  Beyond this there has been a bunch of work from a number of people on
  converting more platforms to IRQ domains, pinctrl conversion, cleanup
  and general feature enablement across most of the active platforms."

Fix up trivial conflicts as per Olof.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits)
  mfd: vexpress-sysreg: Remove LEDs code
  irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids
  clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids
  irq: versatile: delete dangling variable
  ARM: sunxi: add missing include for mdelay()
  ARM: EXYNOS: Avoid early use of of_machine_is_compatible()
  ARM: dts: add node for PL330 MDMA1 controller for exynos4
  ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412
  ARM: EXYNOS: add UART3 to DEBUG_LL ports
  ARM: S3C24XX: Add clkdev entry for camif-upll clock
  ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers
  ARM: sunxi: Add missing sun4i.dtsi file
  pinctrl: samsung: Do not initialise statics to 0
  ARM i.MX6: remove gate_mask from pllv3
  ARM i.MX6: Fix ethernet PLL clocks
  ARM i.MX6: rename PLLs according to datasheet
  ARM i.MX6: Add pwm support
  ARM i.MX51: Add pwm support
  ARM i.MX53: Add pwm support
  ARM: mx5: Replace clk_register_clkdev with clock DT lookup
  ...