linux.git/arch/arm/Makefile, branch v5.17 Linux kernel source tree Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm 2021-11-14T19:30:50+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-14T19:30:50+00:00 6ea45c57dc176dde529ab5d7c4b3f20e52a2bd82 Pull ARM fixes from Russell King: - Fix early_iounmap - Drop cc-option fallbacks for architecture selection * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9156/1: drop cc-option fallbacks for architecture selection ARM: 9155/1: fix early early_iounmap() 
Pull ARM fixes from Russell King:

 - Fix early_iounmap

 - Drop cc-option fallbacks for architecture selection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9156/1: drop cc-option fallbacks for architecture selection
  ARM: 9155/1: fix early early_iounmap()
ARM: 9156/1: drop cc-option fallbacks for architecture selection 2021-11-12T12:49:37+00:00 Arnd Bergmann arnd@arndb.de 2021-11-06T18:42:29+00:00 418ace9992a7647c446ed3186df40cf165b67298 Naresh and Antonio ran into a build failure with latest Debian armhf compilers, with lots of output like tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode As it turns out, $(cc-option) fails early here when the FPU is not selected before CPU architecture is selected, as the compiler option check runs before enabling -msoft-float, which causes a problem when testing a target architecture level without an FPU: cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this issue, but the fallback logic is already broken because all supported compilers (gcc-5 and higher) are much more recent than these options, and building with -march=armv5t as a fallback no longer works. The best way forward that I see is to just remove all the checks, which also has the nice side-effect of slightly improving the startup time for 'make'. The -mtune=marvell-f option was apparently never supported by any mainline compiler, and the custom Codesourcery gcc build that did support is now too old to build kernels, so just use -mtune=xscale unconditionally for those. This should be safe to apply on all stable kernels, and will be required in order to keep building them with gcc-11 and higher. Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419 Reported-by: Antonio Terceiro <antonio.terceiro@linaro.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com> Cc: Matthias Klose <doko@debian.org> Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> 
Naresh and Antonio ran into a build failure with latest Debian
armhf compilers, with lots of output like

 tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode

As it turns out, $(cc-option) fails early here when the FPU is not
selected before CPU architecture is selected, as the compiler
option check runs before enabling -msoft-float, which causes
a problem when testing a target architecture level without an FPU:

cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU

Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this
issue, but the fallback logic is already broken because all supported
compilers (gcc-5 and higher) are much more recent than these options,
and building with -march=armv5t as a fallback no longer works.

The best way forward that I see is to just remove all the checks, which
also has the nice side-effect of slightly improving the startup time for
'make'.

The -mtune=marvell-f option was apparently never supported by any mainline
compiler, and the custom Codesourcery gcc build that did support is
now too old to build kernels, so just use -mtune=xscale unconditionally
for those.

This should be safe to apply on all stable kernels, and will be required
in order to keep building them with gcc-11 and higher.

Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419

Reported-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Cc: Matthias Klose <doko@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 2021-11-08T17:15:45+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-11-08T17:15:45+00:00 1e9ed9360f80d13e41684ca458f01fdf922c7c57 Pull Kbuild updates from Masahiro Yamada: - Remove the global -isystem compiler flag, which was made possible by the introduction of <linux/stdarg.h> - Improve the Kconfig help to print the location in the top menu level - Fix "FORCE prerequisite is missing" build warning for sparc - Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate a zstd-compressed tarball - Prevent gen_init_cpio tool from generating a corrupted cpio when KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later - Misc cleanups * tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits) kbuild: use more subdir- for visiting subdirectories while cleaning sh: remove meaningless archclean line initramfs: Check timestamp to prevent broken cpio archive kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug gen_init_cpio: add static const qualifiers kbuild: Add make tarzst-pkg build option scripts: update the comments of kallsyms support sparc: Add missing "FORCE" target when using if_changed kconfig: refactor conf_touch_dep() kconfig: refactor conf_write_dep() kconfig: refactor conf_write_autoconf() kconfig: add conf_get_autoheader_name() kconfig: move sym_escape_string_value() to confdata.c kconfig: refactor listnewconfig code kconfig: refactor conf_write_symbol() kconfig: refactor conf_write_heading() kconfig: remove 'const' from the return type of sym_escape_string_value() kconfig: rename a variable in the lexer to a clearer name kconfig: narrow the scope of variables in the lexer kconfig: Create links to main menu items in search ... 
Pull Kbuild updates from Masahiro Yamada:

 - Remove the global -isystem compiler flag, which was made possible by
   the introduction of <linux/stdarg.h>

 - Improve the Kconfig help to print the location in the top menu level

 - Fix "FORCE prerequisite is missing" build warning for sparc

 - Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
   generate a zstd-compressed tarball

 - Prevent gen_init_cpio tool from generating a corrupted cpio when
   KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later

 - Misc cleanups

* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
  kbuild: use more subdir- for visiting subdirectories while cleaning
  sh: remove meaningless archclean line
  initramfs: Check timestamp to prevent broken cpio archive
  kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
  gen_init_cpio: add static const qualifiers
  kbuild: Add make tarzst-pkg build option
  scripts: update the comments of kallsyms support
  sparc: Add missing "FORCE" target when using if_changed
  kconfig: refactor conf_touch_dep()
  kconfig: refactor conf_write_dep()
  kconfig: refactor conf_write_autoconf()
  kconfig: add conf_get_autoheader_name()
  kconfig: move sym_escape_string_value() to confdata.c
  kconfig: refactor listnewconfig code
  kconfig: refactor conf_write_symbol()
  kconfig: refactor conf_write_heading()
  kconfig: remove 'const' from the return type of sym_escape_string_value()
  kconfig: rename a variable in the lexer to a clearer name
  kconfig: narrow the scope of variables in the lexer
  kconfig: Create links to main menu items in search
  ...
kbuild: use more subdir- for visiting subdirectories while cleaning 2021-10-24T04:49:46+00:00 Masahiro Yamada masahiroy@kernel.org 2021-10-13T06:36:22+00:00 8212f8986d311ccf6a72305e6bdbd814691701d6 Documentation/kbuild/makefiles.rst suggests to use "archclean" for cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement. Since commit d92cc4d51643 ("kbuild: require all architectures to have arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for all architectures. This can take advantage of the parallel option (-j) for "make clean". I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep" target no longer exists. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) 
Documentation/kbuild/makefiles.rst suggests to use "archclean" for
cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement.

Since commit d92cc4d51643 ("kbuild: require all architectures to have
arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for
all architectures. This can take advantage of the parallel option (-j)
for "make clean".

I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep"
target no longer exists.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
ARM: smp: Store current pointer in TPIDRURO register if available 2021-09-27T14:54:02+00:00 Ard Biesheuvel ardb@kernel.org 2021-09-18T08:44:37+00:00 50596b7559bf226bb35ad55855ee979453ec06a1 Now that the user space TLS register is assigned on every return to user space, we can use it to keep the 'current' pointer while running in the kernel. This removes the need to access it via thread_info, which is located at the base of the stack, but will be moved out of there in a subsequent patch. Use the __builtin_thread_pointer() helper when available - this will help GCC understand that reloading the value within the same function is not necessary, even when using the per-task stack protector (which also generates accesses via the TLS register). For example, the generated code below loads TPIDRURO only once, and uses it to access both the stack canary and the preempt_count fields. <do_one_initcall>: e92d 41f0 stmdb sp!, {r4, r5, r6, r7, r8, lr} ee1d 4f70 mrc 15, 0, r4, cr13, cr0, {3} 4606 mov r6, r0 b094 sub sp, #80 ; 0x50 f8d4 34e8 ldr.w r3, [r4, #1256] ; 0x4e8 <- stack canary 9313 str r3, [sp, #76] ; 0x4c f8d4 8004 ldr.w r8, [r4, #4] <- preempt count Co-developed-by: Keith Packard <keithpac@amazon.com> Signed-off-by: Keith Packard <keithpac@amazon.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com> 
Now that the user space TLS register is assigned on every return to user
space, we can use it to keep the 'current' pointer while running in the
kernel. This removes the need to access it via thread_info, which is
located at the base of the stack, but will be moved out of there in a
subsequent patch.

Use the __builtin_thread_pointer() helper when available - this will
help GCC understand that reloading the value within the same function is
not necessary, even when using the per-task stack protector (which also
generates accesses via the TLS register). For example, the generated
code below loads TPIDRURO only once, and uses it to access both the
stack canary and the preempt_count fields.

<do_one_initcall>:
       e92d 41f0       stmdb   sp!, {r4, r5, r6, r7, r8, lr}
       ee1d 4f70       mrc     15, 0, r4, cr13, cr0, {3}
       4606            mov     r6, r0
       b094            sub     sp, #80 ; 0x50
       f8d4 34e8       ldr.w   r3, [r4, #1256] ; 0x4e8  <- stack canary
       9313            str     r3, [sp, #76]   ; 0x4c
       f8d4 8004       ldr.w   r8, [r4, #4]             <- preempt count

Co-developed-by: Keith Packard <keithpac@amazon.com>
Signed-off-by: Keith Packard <keithpac@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
gcc-plugins: arm-ssp: Prepare for THREAD_INFO_IN_TASK support 2021-09-27T14:54:01+00:00 Ard Biesheuvel ardb@kernel.org 2021-09-18T08:44:34+00:00 dfbdcda280eb762bae2184145cc0702932d41798 We will be enabling THREAD_INFO_IN_TASK support for ARM, which means that we can no longer load the stack canary value by masking the stack pointer and taking the copy that lives in thread_info. Instead, we will be able to load it from the task_struct directly, by using the TPIDRURO register which will hold the current task pointer when THREAD_INFO_IN_TASK is in effect. This is much more straight-forward, and allows us to declutter this code a bit while at it. Note that this means that ARMv6 (non-v6K) SMP systems can no longer use this feature, but those are quite rare to begin with, so this is a reasonable trade off. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com> 
We will be enabling THREAD_INFO_IN_TASK support for ARM, which means
that we can no longer load the stack canary value by masking the stack
pointer and taking the copy that lives in thread_info. Instead, we will
be able to load it from the task_struct directly, by using the TPIDRURO
register which will hold the current task pointer when
THREAD_INFO_IN_TASK is in effect. This is much more straight-forward,
and allows us to declutter this code a bit while at it.

Note that this means that ARMv6 (non-v6K) SMP systems can no longer use
this feature, but those are quite rare to begin with, so this is a
reasonable trade off.

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
ARM: 9102/1: move theinstall rules to arch/arm/Makefile 2021-08-10T11:16:07+00:00 Masahiro Yamada masahiroy@kernel.org 2021-07-29T14:03:51+00:00 d7bcc5e22967c96685d03dbbd167e1a1ddf9b910 Currently, the (z/u)install targets in arch/arm/Makefile descend into arch/arm/boot/Makefile to invoke the shell script, but there is no good reason to do so. arch/arm/Makefile can run the shell script directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> 
Currently, the (z/u)install targets in arch/arm/Makefile descend into
arch/arm/boot/Makefile to invoke the shell script, but there is no
good reason to do so.

arch/arm/Makefile can run the shell script directly.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
kbuild: require all architectures to have arch/$(SRCARCH)/Kbuild 2021-05-26T14:10:37+00:00 Masahiro Yamada masahiroy@kernel.org 2021-05-12T07:57:25+00:00 d92cc4d5164398cc6d191084b46e622976c0ba89 arch/$(SRCARCH)/Kbuild is useful for Makefile cleanups because you can use the obj-y syntax. Add an empty file if it is missing in arch/$(SRCARCH)/. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 
arch/$(SRCARCH)/Kbuild is useful for Makefile cleanups because you can
use the obj-y syntax.

Add an empty file if it is missing in arch/$(SRCARCH)/.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ARM: socfpga: introduce common ARCH_INTEL_SOCFPGA 2021-03-23T16:03:35+00:00 Krzysztof Kozlowski krzysztof.kozlowski@canonical.com 2021-03-11T15:25:32+00:00 910499e13387fdd025a8113f2d9fc0207eae4848 Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only one for both of them. This the common practice for other platforms. Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come from multiple vendors. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> 
Simplify 32-bit and 64-bit Intel SoCFPGA Kconfig options by having only
one for both of them.  This the common practice for other platforms.
Additionally, the ARCH_SOCFPGA is too generic as SoCFPGA designs come
from multiple vendors.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Merge tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux 2021-02-21T18:40:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-02-21T18:40:34+00:00 24880bef417f6e9069158c750969d18793427a10 Pull oprofile and dcookies removal from Viresh Kumar: "Remove oprofile and dcookies support The 'oprofile' user-space tools don't use the kernel OPROFILE support any more, and haven't in a long time. User-space has been converted to the perf interfaces. The dcookies stuff is only used by the oprofile code. Now that oprofile's support is getting removed from the kernel, there is no need for dcookies as well. Remove kernel's old oprofile and dcookies support" * tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux: fs: Remove dcookies support drivers: Remove CONFIG_OPROFILE support arch: xtensa: Remove CONFIG_OPROFILE support arch: x86: Remove CONFIG_OPROFILE support arch: sparc: Remove CONFIG_OPROFILE support arch: sh: Remove CONFIG_OPROFILE support arch: s390: Remove CONFIG_OPROFILE support arch: powerpc: Remove oprofile arch: powerpc: Stop building and using oprofile arch: parisc: Remove CONFIG_OPROFILE support arch: mips: Remove CONFIG_OPROFILE support arch: microblaze: Remove CONFIG_OPROFILE support arch: ia64: Remove rest of perfmon support arch: ia64: Remove CONFIG_OPROFILE support arch: hexagon: Don't select HAVE_OPROFILE arch: arc: Remove CONFIG_OPROFILE support arch: arm: Remove CONFIG_OPROFILE support arch: alpha: Remove CONFIG_OPROFILE support 
Pull oprofile and dcookies removal from Viresh Kumar:
 "Remove oprofile and dcookies support

  The 'oprofile' user-space tools don't use the kernel OPROFILE support
  any more, and haven't in a long time. User-space has been converted to
  the perf interfaces.

  The dcookies stuff is only used by the oprofile code. Now that
  oprofile's support is getting removed from the kernel, there is no
  need for dcookies as well.

  Remove kernel's old oprofile and dcookies support"

* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
  fs: Remove dcookies support
  drivers: Remove CONFIG_OPROFILE support
  arch: xtensa: Remove CONFIG_OPROFILE support
  arch: x86: Remove CONFIG_OPROFILE support
  arch: sparc: Remove CONFIG_OPROFILE support
  arch: sh: Remove CONFIG_OPROFILE support
  arch: s390: Remove CONFIG_OPROFILE support
  arch: powerpc: Remove oprofile
  arch: powerpc: Stop building and using oprofile
  arch: parisc: Remove CONFIG_OPROFILE support
  arch: mips: Remove CONFIG_OPROFILE support
  arch: microblaze: Remove CONFIG_OPROFILE support
  arch: ia64: Remove rest of perfmon support
  arch: ia64: Remove CONFIG_OPROFILE support
  arch: hexagon: Don't select HAVE_OPROFILE
  arch: arc: Remove CONFIG_OPROFILE support
  arch: arm: Remove CONFIG_OPROFILE support
  arch: alpha: Remove CONFIG_OPROFILE support