linux.git/arch/arc, branch v5.7-rc2

mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS

2020-04-10T22:36:21+00:00

There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS.  While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms.  Apart from simplification, this
reduces code duplication as well.

Signed-off-by: Anshuman Khandual 
Signed-off-by: Andrew Morton 
Reviewed-by: Vlastimil Babka 
Acked-by: Geert Uytterhoeven 
Cc: Richard Henderson 
Cc: Vineet Gupta 
Cc: Russell King 
Cc: Catalin Marinas 
Cc: Mark Salter 
Cc: Guo Ren 
Cc: Yoshinori Sato 
Cc: Brian Cain 
Cc: Tony Luck 
Cc: Michal Simek 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: Nick Hu 
Cc: Ley Foon Tan 
Cc: Jonas Bonn 
Cc: "James E.J. Bottomley" 
Cc: Michael Ellerman 
Cc: Paul Walmsley 
Cc: Heiko Carstens 
Cc: Rich Felker 
Cc: "David S. Miller" 
Cc: Guan Xuetao 
Cc: Thomas Gleixner 
Cc: Jeff Dike 
Cc: Chris Zankel 
Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds

Merge tag 'arc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

2020-04-03T22:28:42+00:00

Pull ARC updates from Vineet Gupta:

 - Support for DSP enabled userspace (save/restore regs)

 - Misc other platform fixes

* tag 'arc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: allow userspace DSP applications to use AGU extensions
  ARC: add support for DSP-enabled userspace applications
  ARC: handle DSP presence in HW
  ARC: add helpers to sanitize config options
  ARC: [plat-axs10x]: PGU: remove unused encoder-slave property

Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2020-04-03T20:12:26+00:00

Pull SPDX updates from Greg KH:
 "Here are three SPDX patches for 5.7-rc1.

  One fixes up the SPDX tag for a single driver, while the other two go
  through the tree and add SPDX tags for all of the .gitignore files as
  needed.

  Nothing too complex, but you will get a merge conflict with your
  current tree, that should be trivial to handle (one file modified by
  two things, one file deleted.)

  All three of these have been in linux-next for a while, with no
  reported issues other than the merge conflict"

* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  ASoC: MT6660: make spdxcheck.py happy
  .gitignore: add SPDX License Identifier
  .gitignore: remove too obvious comments

mm: allow VM_FAULT_RETRY for multiple times

2020-04-02T16:35:30+00:00

The idea comes from a discussion between Linus and Andrea [1].

Before this patch we only allow a page fault to retry once.  We achieved
this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing
handle_mm_fault() the second time.  This was majorly used to avoid
unexpected starvation of the system by looping over forever to handle the
page fault on a single page.  However that should hardly happen, and after
all for each code path to return a VM_FAULT_RETRY we'll first wait for a
condition (during which time we should possibly yield the cpu) to happen
before VM_FAULT_RETRY is really returned.

This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY
flag when we receive VM_FAULT_RETRY.  It means that the page fault handler
now can retry the page fault for multiple times if necessary without the
need to generate another page fault event.  Meanwhile we still keep the
FAULT_FLAG_TRIED flag so page fault handler can still identify whether a
page fault is the first attempt or not.

Then we'll have these combinations of fault flags (only considering
ALLOW_RETRY flag and TRIED flag):

  - ALLOW_RETRY and !TRIED:  this means the page fault allows to
                             retry, and this is the first try

  - ALLOW_RETRY and TRIED:   this means the page fault allows to
                             retry, and this is not the first try

  - !ALLOW_RETRY and !TRIED: this means the page fault does not allow
                             to retry at all

  - !ALLOW_RETRY and TRIED:  this is forbidden and should never be used

In existing code we have multiple places that has taken special care of
the first condition above by checking against (fault_flags &
FAULT_FLAG_ALLOW_RETRY).  This patch introduces a simple helper to detect
the first retry of a page fault by checking against both (fault_flags &
FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now
even the 2nd try will have the ALLOW_RETRY set, then use that helper in
all existing special paths.  One example is in __lock_page_or_retry(), now
we'll drop the mmap_sem only in the first attempt of page fault and we'll
keep it in follow up retries, so old locking behavior will be retained.

This will be a nice enhancement for current code [2] at the same time a
supporting material for the future userfaultfd-writeprotect work, since in
that work there will always be an explicit userfault writeprotect retry
for protected pages, and if that cannot resolve the page fault (e.g., when
userfaultfd-writeprotect is used in conjunction with swapped pages) then
we'll possibly need a 3rd retry of the page fault.  It might also benefit
other potential users who will have similar requirement like userfault
write-protection.

GUP code is not touched yet and will be covered in follow up patch.

Please read the thread below for more information.

[1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/
[2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/

Suggested-by: Linus Torvalds 
Suggested-by: Andrea Arcangeli 
Signed-off-by: Peter Xu 
Signed-off-by: Andrew Morton 
Tested-by: Brian Geffon 
Cc: Bobby Powers 
Cc: David Hildenbrand 
Cc: Denis Plotnikov 
Cc: "Dr . David Alan Gilbert" 
Cc: Hugh Dickins 
Cc: Jerome Glisse 
Cc: Johannes Weiner 
Cc: "Kirill A . Shutemov" 
Cc: Martin Cracauer 
Cc: Marty McFadden 
Cc: Matthew Wilcox 
Cc: Maya Gokhale 
Cc: Mel Gorman 
Cc: Mike Kravetz 
Cc: Mike Rapoport 
Cc: Pavel Emelyanov 
Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com
Signed-off-by: Linus Torvalds

mm: introduce FAULT_FLAG_DEFAULT

2020-04-02T16:35:29+00:00

Although there're tons of arch-specific page fault handlers, most of them
are still sharing the same initial value of the page fault flags.  Say,
merely all of the page fault handlers would allow the fault to be retried,
and they also allow the fault to respond to SIGKILL.

Let's define a default value for the fault flags to replace those initial
page fault flags that were copied over.  With this, it'll be far easier to
introduce new fault flag that can be used by all the architectures instead
of touching all the archs.

Signed-off-by: Peter Xu 
Signed-off-by: Andrew Morton 
Tested-by: Brian Geffon 
Reviewed-by: David Hildenbrand 
Cc: Andrea Arcangeli 
Cc: Bobby Powers 
Cc: Denis Plotnikov 
Cc: "Dr . David Alan Gilbert" 
Cc: Hugh Dickins 
Cc: Jerome Glisse 
Cc: Johannes Weiner 
Cc: "Kirill A . Shutemov" 
Cc: Martin Cracauer 
Cc: Marty McFadden 
Cc: Matthew Wilcox 
Cc: Maya Gokhale 
Cc: Mel Gorman 
Cc: Mike Kravetz 
Cc: Mike Rapoport 
Cc: Pavel Emelyanov 
Link: http://lkml.kernel.org/r/20200220160238.9694-1-peterx@redhat.com
Signed-off-by: Linus Torvalds

arc/mm: use helper fault_signal_pending()

2020-04-02T16:35:29+00:00

Let ARC to use the new helper fault_signal_pending() by moving the signal
check out of the retry logic as standalone.  This should also helps to
simplify the code a bit.

Signed-off-by: Peter Xu 
Signed-off-by: Andrew Morton 
Tested-by: Brian Geffon 
Cc: Andrea Arcangeli 
Cc: Bobby Powers 
Cc: David Hildenbrand 
Cc: Denis Plotnikov 
Cc: "Dr . David Alan Gilbert" 
Cc: Hugh Dickins 
Cc: Jerome Glisse 
Cc: Johannes Weiner 
Cc: "Kirill A . Shutemov" 
Cc: Martin Cracauer 
Cc: Marty McFadden 
Cc: Matthew Wilcox 
Cc: Maya Gokhale 
Cc: Mel Gorman 
Cc: Mike Kravetz 
Cc: Mike Rapoport 
Cc: Pavel Emelyanov 
Link: http://lkml.kernel.org/r/20200220155843.9172-1-peterx@redhat.com
Signed-off-by: Linus Torvalds

asm-generic: make more kernel-space headers mandatory

2020-04-02T16:35:25+00:00

Change a header to mandatory-y if both of the following are met:

[1] At least one architecture (except um) specifies it as generic-y in
    arch/*/include/asm/Kbuild

[2] Every architecture (except um) either has its own implementation
    (arch/*/include/asm/*.h) or specifies it as generic-y in
    arch/*/include/asm/Kbuild

This commit was generated by the following shell script.

----------------------------------->8-----------------------------------

arches=$(cd arch; ls -1 | sed -e '/Kconfig/d' -e '/um/d')

tmpfile=$(mktemp)

grep "^mandatory-y +=" include/asm-generic/Kbuild > $tmpfile

find arch -path 'arch/*/include/asm/Kbuild' |
	xargs sed -n 's/^generic-y += \(.*\)/\1/p' | sort -u |
while read header
do
	mandatory=yes

	for arch in $arches
	do
		if ! grep -q "generic-y += $header" arch/$arch/include/asm/Kbuild &&
			! [ -f arch/$arch/include/asm/$header ]; then
			mandatory=no
			break
		fi
	done

	if [ "$mandatory" = yes ]; then
		echo "mandatory-y += $header" >> $tmpfile

		for arch in $arches
		do
			sed -i "/generic-y += $header/d" arch/$arch/include/asm/Kbuild
		done
	fi

done

sed -i '/^mandatory-y +=/d' include/asm-generic/Kbuild

LANG=C sort $tmpfile >> include/asm-generic/Kbuild

----------------------------------->8-----------------------------------

One obvious benefit is the diff stat:

 25 files changed, 52 insertions(+), 557 deletions(-)

It is tedious to list generic-y for each arch that needs it.

So, mandatory-y works like a fallback default (by just wrapping
asm-generic one) when arch does not have a specific header
implementation.

See the following commits:

def3f7cefe4e81c296090e1722a76551142c227c
a1b39bae16a62ce4aae02d958224f19316d98b24

It is tedious to convert headers one by one, so I processed by a shell
script.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Andrew Morton 
Cc: Michal Simek 
Cc: Christoph Hellwig 
Cc: Arnd Bergmann 
Link: http://lkml.kernel.org/r/20200210175452.5030-1-masahiroy@kernel.org
Signed-off-by: Linus Torvalds

Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-03-30T23:17:15+00:00

Pull locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Continued user-access cleanups in the futex code.

   - percpu-rwsem rewrite that uses its own waitqueue and atomic_t
     instead of an embedded rwsem. This addresses a couple of
     weaknesses, but the primary motivation was complications on the -rt
     kernel.

   - Introduce raw lock nesting detection on lockdep
     (CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal
     lock differences. This too originates from -rt.

   - Reuse lockdep zapped chain_hlocks entries, to conserve RAM
     footprint on distro-ish kernels running into the "BUG:
     MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep
     chain-entries pool.

   - Misc cleanups, smaller fixes and enhancements - see the changelog
     for details"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
  fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t
  thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
  Documentation/locking/locktypes: Minor copy editor fixes
  Documentation/locking/locktypes: Further clarifications and wordsmithing
  m68knommu: Remove mm.h include from uaccess_no.h
  x86: get rid of user_atomic_cmpxchg_inatomic()
  generic arch_futex_atomic_op_inuser() doesn't need access_ok()
  x86: don't reload after cmpxchg in unsafe_atomic_op2() loop
  x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end()
  objtool: whitelist __sanitizer_cov_trace_switch()
  [parisc, s390, sparc64] no need for access_ok() in futex handling
  sh: no need of access_ok() in arch_futex_atomic_op_inuser()
  futex: arch_futex_atomic_op_inuser() calling conventions change
  completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all()
  lockdep: Add posixtimer context tracing bits
  lockdep: Annotate irq_work
  lockdep: Add hrtimer context tracing bits
  lockdep: Introduce wait-type checks
  completion: Use simple wait queues
  sched/swait: Prepare usage in completions
  ...

futex: arch_futex_atomic_op_inuser() calling conventions change

2020-03-28T03:58:51+00:00

Move access_ok() in and pagefault_enable()/pagefault_disable() out.
Mechanical conversion only - some instances don't really need
a separate access_ok() at all (e.g. the ones only using
get_user()/put_user(), or architectures where access_ok()
is always true); we'll deal with that in followups.

Signed-off-by: Al Viro

.gitignore: add SPDX License Identifier

2020-03-25T10:50:48+00:00

Add SPDX License Identifier to all .gitignore files.

Signed-off-by: Masahiro Yamada 
Signed-off-by: Greg Kroah-Hartman