Accumulator is present in configs with FPU and/or DSP MPY (mpy > 6)

Instead of doing this in pt_regs (and thus every kernel entry/exit),
this could have been done in context switch (and for user task only) as
currently kernel doesn't clobber these registers for its own accord.
However we will soon start using 64-bit multiply instructions for kernel
which can clobber these. Also gcc folks also plan to start using these
as GPRs, hence better to always save/restore them

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Make ATOMIC_INIT available for all ARC platforms (including plat-eznps)

Cc: <stable@vger.kernel.org>	# 4.9+
Signed-off-by: Noam Camus <noamca@mellanox.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Pull ARC fixes from Vineet Gupta:
 "Accumulated fixes for ARC which I've been been sitting on for a while:

   - reading clk from driver vs device tree [Vlad]

   - fix support for UIO in VDK platform [Alexey]

   - SLC busy bit reading workaround

   - build warning with kprobes header reorg"

* tag 'arc-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: fix build warnings with !CONFIG_KPROBES
  ARCv2: SLC: Make sure busy bit is set properly on SLC flushing
  ARC: vdk: Fix support of UIO
  ARCv2: make unimplemented vectors as no-ops rather than halt core
  ARC: get rate from clk driver instead of reading device tree
  ARC: [dts] add cpu nodes to ARCHS SMP device tree
  ARC: [dts] add input clocks for cpu nodes

|   CC      lib/nmi_backtrace.o
| In file included from ../include/linux/kprobes.h:43:0,
|                  from ../lib/nmi_backtrace.c:17:
| ../arch/arc/include/asm/kprobes.h:57:13: warning: 'trap_is_kprobe' defined but not used [-Wunused-function]
|  static void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
|              ^~~~~~~~~~~~~~

The warning started with 7d134b2ce6 ("kprobes: move kprobe declarations
to asm-generic/kprobes.h") which started including <asm/kprobes.h>
unconditionally into <linux/kprobes.h> exposing a stub function for
!CONFIG_KPROBES to rest of world. Fix that by making the stub a macro

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

As reported in STAR 9001165532, an SLC control reg read (for checking
busy state) right after SLC invalidate command may incorrectly return
NOT busy causing software to NOT spin-wait while operation is underway.
(and for some reason this only happens if L1 cache is also disabled - as
required by IOC programming model)

Suggested workaround is to do an additional Control Reg read, which
ensures the 2nd read gets the right status.

Cc: stable@vger.kernel.org  #4.10
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[vgupta: reworte changelog a bit]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

MotherBoard section has its "ranges" set to 0xE000_0000-0xF000_0000.
But UIO node maps 4 different areas in different memory locations
and all outside MB's ranges.

That obviously breaks UIO mappings in runtime.

Cc: Ruud Derwig <rderwig@synopsys.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

If an architecture uses 4level-fixup.h we don't need to do anything as
it includes 5level-fixup.h.

If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK
before inclusion of the header. It makes asm-generic code to use
5level-fixup.h.

If an architecture has 4-level paging or folds levels on its own,
include 5level-fixup.h directly.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We were reading clock rate directly from device tree "clock-frequency"
property of corresponding clock node in show_cpuinfo function.

Such approach is correct only in case cpu is always clocked by
"fixed-clock". If we use clock driver that allows rate to be changed
this won't work as rate may change during the time or even
"clock-frequency" property may not be presented at all.

So this commit replaces reading device tree with getting rate from clock
driver. This approach is much more flexible and will work for both fixed
and mutable clocks.

Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Trying to get clock for CPU cores on SMP systems I found that I was only
able to get clock for core[0]. That was because only one cpu@0 node was
represented in ARC HS device tree and it was impossible to get clock for
"non-existing" cores.

So as ARC HS may have up to 4 cores we update device tree to match
maximum possible cores quantity.

Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>