Pull ARC updates from Vineet Gupta:

 - long due rewrite of do_page_fault

 - refactoring of entry/exit code to utilize the double load/store
   instructions

 - hsdk platform updates

* tag 'arc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk]: Enable AXI DW DMAC in defconfig
  ARC: [plat-hsdk]: enable DW SPI controller
  ARC: hide unused function unw_hdr_alloc
  ARC: [haps] Add Virtio support
  ARCv2: entry: simplify return to Delay Slot via interrupt
  ARC: entry: EV_Trap expects r10 (vs. r9) to have exception cause
  ARCv2: entry: rewrite to enable use of double load/stores LDD/STD
  ARCv2: entry: avoid a branch
  ARCv2: entry: push out the Z flag unclobber from common EXCEPTION_PROLOGUE
  ARCv2: entry: comments about hardware auto-save on taken interrupts
  ARC: mm: do_page_fault refactor #8: release mmap_sem sooner
  ARC: mm: do_page_fault refactor #7: fold the various error handling
  ARC: mm: do_page_fault refactor #6: error handlers to use same pattern
  ARC: mm: do_page_fault refactor #5: scoot no_context to end
  ARC: mm: do_page_fault refactor #4: consolidate retry related logic
  ARC: mm: do_page_fault refactor #3: tidyup vma access permission code
  ARC: mm: do_page_fault refactor #2: remove short lived variable
  ARC: mm: do_page_fault refactor #1: remove label @good_area

Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...

As kernelci.org reports, this function is not used in
vdk_hs38_defconfig:

arch/arc/kernel/unwind.c:188:14: warning: 'unw_hdr_alloc' defined but not used [-Wunused-function]

Fixes: bc79c9a72165 ("ARC: dw2 unwind: Reinstante unwinding out of modules")
Link: https://kernelci.org/build/id/5d1cae3f59b514300340c132/logs/
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Commit 4255b07f2c9c43540 ("ARCv2: STAR 9000793984: Handle return
from intr to Delay Slot") involved a complex 2 staged trampoline.

Apparently this can be greatly simplified by returning from pure
kernel mode (iso interrupt) so drop to pure kernel mdoe and execute
the normal exception return path.

Testing this was a bit of challenge as return from interrupt is rarely
executed now after commit 4de0e52867d83105767 ("ARCv2: STAR 9000814690:
Really Re-enable interrupts to avoid deadlocks"). That fix is necessary
evil and pct interrupts etc do exercise intr return path.
Anyhow after a revert of above in my local test setup I was able to hit
this case and verify the patch works.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

avoids 1 MOV instruction in light of double load/store code

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

 - the motivation was to be remove blatent copy-paste due to hasty support
   of CONFIG_ARC_IRQ_NO_AUTOSAVE support

 - but with refactoring we could use LDD/STD to greatly optimize the code

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  publishhed by the free software foundation

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 48 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.292339952@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As synchronous exceptions really only make sense against the current
task (otherwise how are you synchronous) remove the task parameter
from from force_sig_fault to make it explicit that is what is going
on.

The two known exceptions that deliver a synchronous exception to a
stopped ptraced task have already been changed to
force_sig_fault_to_task.

The callers have been changed with the following emacs regular expression
(with obvious variations on the architectures that take more arguments)
to avoid typos:

force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)]
->
force_sig_fault(\1,\2,\3)

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Update the calls of force_sig_fault that pass in a variable that is
set to current earlier to explicitly use current.

This is to make the next change that removes the task parameter
from force_sig_fault easier to verify.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>