Add a missing property to GMAC node so that multicast filtering works
correctly.

Fixes: 556cc1c5f528 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)")
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Pull ARC updates from Vineet Gupta

 - Jump Label support for ARC

 - kmemleak enabled

 - arc mm backend TLB Miss / flush optimizations

 - nSIM platform switching to dwuart (vs. arcuart) and ensuing defconfig
   updates and cleanups

 - axs platform pll / video-mode updates

* tag 'arc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: add kmemleak support
  ARC: [plat-axs10x]: remove hardcoded video mode from bootargs
  ARC: [plat-axs10x]: use pgu pll instead of fixed clock
  ARC: ARCv2: jump label: implement jump label patching
  ARC: mm: tlb flush optim: elide redundant uTLB invalidates for MMUv3
  ARC: mm: tlb flush optim: elide repeated uTLB invalidate in loop
  ARC: mm: tlb flush optim: Make TLBWriteNI fallback to TLBWrite if not available
  ARC: mm: TLB Miss optim: avoid re-reading ECR
  ARCv2: mm: TLB Miss optim: Use double world load/stores LDD/STD
  ARCv2: mm: TLB Miss optim: SMP builds can cache pgd pointer in mmu scratch reg
  ARC: nSIM_700: remove unused network options
  ARC: nSIM_700: switch to DW UART usage
  ARC: merge HAPS-HS with nSIM-HS configs
  ARC: HAPS: cleanup defconfigs from unused ETH drivers
  ARC: HAPS: add HIGHMEM memory zone to DTS
  ARC: HAPS: use same UART configuration everywhere
  ARC: HAPS: cleanup defconfigs from unused IO-related options
  ARC: regenerate nSIM and HAPS defconfigs

Now have pixel clock PLL driver and we can change pixel clock rate
so we don't need to enforce one exact video mode. Moreover enforcing
video mode is harmful in case of we enforce mode which isn't
supported by the monitor we are using.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Use PLL driver instead of fixed-clock for PGU pixel clock.
That allows us to support wider range of graphic modes.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

We have snps,arc-emac enabled in nSIM_700. It's obsolete and it's
not used anymore so remove its device tree node and disable
unused network options in defconfig.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Switch nsim_700_defconfig to dwuart for consistent uart settings
for all nSIM configurations.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Starting from nSIM 2019.06 is possible to use DW UART
instead of ARC UART. That allows us to merge
"nsim_hs" with "haps_hs" and "nsim_hs_smp" with "haps_hs_smp"
with minor changes which were done in previous commits.

We eliminate nsim_hs_defconfig and nsim_hs_smp_defconfig
and leave haps_hs_defconfig and haps_hs_smp_defconfig
which can be used on HAPS / nSIM / ZEBU / QEMU platforms
without additional changes in Linux kernel.

For nSIM we should now use UART property values
"-prop=nsim_mem-dev=uart0,kind=dwuart,base=0xf0000000"
instead of previously used
"-prop=nsim_mem-dev=uart0,base=0xc0fc1000"
"use_connect" and "irq" values of UART property remains untouched.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

This is required as a preparation of merging nSIM and HASP
defonfig and device tree.

As we have HIGHMEM disabled in both HAPS and nSIM defconfigs
this doesn't lead to any functional change.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

For some reason we use ns8250 UART compatible on UP HAPS
configuration and ns16550a (which is ns8250 with FIFO support)
on SMP HAPS configuration.
Given that we have same UART IP with same IP configuration
on both HAPS configuration use ns16550a compatible everywhere.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

HSDK board has adc108s102 SPI ADC IC installed, enable it.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>