xxx/arc/boot/dts/axs101.dt.yaml: dw-apb-ictl@e0012000: $nodename:0: \
'dw-apb-ictl@e0012000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
 From schema: xxx/interrupt-controller/snps,dw-apb-ictl.yaml

The node name of the interrupt controller must start with
"interrupt-controller" instead of "dw-apb-ictl".

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

NPS customers are no longer doing active development, as evident from
rand config build failures reported in recent times, so drop support
for NPS platform.

Tested-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

HSDK board has Micrel KSZ9031, recent commit
bcf3440c6dd ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
caused a breakdown of Ethernet.
Using 'phy-mode = "rgmii"' is not correct because accodring RGMII
specification it is necessary to have delay on RX (PHY to MAX)
which is not generated in case of "rgmii".
Using "rgmii-id" adds necessary delay and solves the issue.

Also adding name of PHY placed on HSDK board.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Newer version of HSDK aka HSDK-4xD (with dual issue HS48x4 CPU) wired up
the perf interrupt, so enable that in DT.
This is OK for old HSDK where this irq is ignored because pct irq is not
wired up in hardware.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Pull ARC updates from Vineet Gupta:

 - Support for DSP enabled userspace (save/restore regs)

 - Misc other platform fixes

* tag 'arc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: allow userspace DSP applications to use AGU extensions
  ARC: add support for DSP-enabled userspace applications
  ARC: handle DSP presence in HW
  ARC: add helpers to sanitize config options
  ARC: [plat-axs10x]: PGU: remove unused encoder-slave property

Add SPDX License Identifier to all .gitignore files.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC PGU is looking for encoder via endpoint mechanism and doesn't
use "encoder-slave" property for a long time. Let's drop unused
"encoder-slave" property from ARC PGU node in axs10x.

Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Add a missing property to GMAC node so that multicast filtering works
correctly.

Fixes: 556cc1c5f528 ("ARC: [axs101] Add support for AXS101 SDP (software development platform)")
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Pull ARC updates from Vineet Gupta

 - Jump Label support for ARC

 - kmemleak enabled

 - arc mm backend TLB Miss / flush optimizations

 - nSIM platform switching to dwuart (vs. arcuart) and ensuing defconfig
   updates and cleanups

 - axs platform pll / video-mode updates

* tag 'arc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: add kmemleak support
  ARC: [plat-axs10x]: remove hardcoded video mode from bootargs
  ARC: [plat-axs10x]: use pgu pll instead of fixed clock
  ARC: ARCv2: jump label: implement jump label patching
  ARC: mm: tlb flush optim: elide redundant uTLB invalidates for MMUv3
  ARC: mm: tlb flush optim: elide repeated uTLB invalidate in loop
  ARC: mm: tlb flush optim: Make TLBWriteNI fallback to TLBWrite if not available
  ARC: mm: TLB Miss optim: avoid re-reading ECR
  ARCv2: mm: TLB Miss optim: Use double world load/stores LDD/STD
  ARCv2: mm: TLB Miss optim: SMP builds can cache pgd pointer in mmu scratch reg
  ARC: nSIM_700: remove unused network options
  ARC: nSIM_700: switch to DW UART usage
  ARC: merge HAPS-HS with nSIM-HS configs
  ARC: HAPS: cleanup defconfigs from unused ETH drivers
  ARC: HAPS: add HIGHMEM memory zone to DTS
  ARC: HAPS: use same UART configuration everywhere
  ARC: HAPS: cleanup defconfigs from unused IO-related options
  ARC: regenerate nSIM and HAPS defconfigs

Now have pixel clock PLL driver and we can change pixel clock rate
so we don't need to enforce one exact video mode. Moreover enforcing
video mode is harmful in case of we enforce mode which isn't
supported by the monitor we are using.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>